Donek Posted April 21, 2018 Report Share Posted April 21, 2018 2 hours ago, barryj said: So Sean only got the Deeluxe inventory. Hmm?? Wonder who is the mystery Bomber parts buyer and when they will open for business?? Wonder if that person also got all the non bomber stuff, boards and bindings?? I can't say for sure what will be done with that small quantity of items. There were only a handfull of new boards there. I saw some carve company binding parts, but was no paying attention enough to look for those bindings. 1 hour ago, Lurch said: Sean would you be able to give a rough estimate of how much TD3 hardware is left? (Us Andean Vultures are impatient birds ) ) thanks I have never assembled bomber bindings, so I can't claim to have a good eye for the number of total binding parts available. I would estimate that there were at least 100 to 200 bindings worth of some parts though. I do not know if every component had such a count. It's possible that there is a limit of only 30 pair based on a single component. There was a very large quantity of unopened part boxes labeled as Bomber parts. 1 Quote Link to comment Share on other sites More sharing options...
digger jr Posted April 22, 2018 Report Share Posted April 22, 2018 Thanks Sean! Quote Link to comment Share on other sites More sharing options...
queequeg Posted April 22, 2018 Report Share Posted April 22, 2018 7 hours ago, Donek said: I saw a box full of them, so they are there. I'll let the other party chime in once his deal is done. I too would be interested in various fintec heel parts. I sent you an email, I forgot to mention the pads but I am interested in those as well. Quote Link to comment Share on other sites More sharing options...
bobdea Posted April 22, 2018 Report Share Posted April 22, 2018 21 hours ago, carvedog said: Any chance of replacement pads for the Fintec heel? Thx Sean. I know yuani has some... not sure who’s got them now! Quote Link to comment Share on other sites More sharing options...
Donek Posted April 22, 2018 Report Share Posted April 22, 2018 The boots are all unloaded, inventoried and on the web site site. I will work on the liners and parts this week. The 225s are a discontinued boot, so the price is pretty attractive. 3 Quote Link to comment Share on other sites More sharing options...
barryj Posted April 22, 2018 Report Share Posted April 22, 2018 (edited) Wow! That's quite a few boots..... and a lot of work! Thanks Sean!! There's gotta be a pair in there somewhere for me! Off to your web page a hunting I go! Edited April 22, 2018 by barryj Quote Link to comment Share on other sites More sharing options...
Donek Posted April 22, 2018 Report Share Posted April 22, 2018 I have put all the boots on sale for $200 below their retail price. This price will be available for the next 2 weeks. 5 Quote Link to comment Share on other sites More sharing options...
Wolf Posted April 23, 2018 Report Share Posted April 23, 2018 On 4/20/2018 at 5:47 PM, Lurch said: Anybody know the story with these? Few lots selling "as new, but without surface finish" on Fleabay I just want to chime in with a positive feedback concerning ebay seller travisspeed939, the guy who has machined Bomber parts and is selling some on ebay. I received my cant disks with center disks, un-anodized raw, machined aluminum as described. They were just as he described and shipped nice and fast. I don't think it matters whether the cant disks are anodized or not, since they're essentially just spacers. But I may paint them just for kicks and to have something unique. Lurch - for some reason, I just think these would look great in hot pink. Also, a big thanks to Sean at Donek for keeping us informed and for picking up some of Bomber's inventory. You're really helping to mitigate some of the uncertainty surrounding this whole process. 1 Quote Link to comment Share on other sites More sharing options...
bruincounselor Posted April 24, 2018 Report Share Posted April 24, 2018 I decided I couldn't wait for the clearance; I don't want to chance having my heels (and therefore all my bindings) out of commission. I bought a spare set of Fin-Tec heels. This way whatever parts I need will be in my inventory. Thanks to Sean for having a few sets left over! Quote Link to comment Share on other sites More sharing options...
trailertrash Posted April 24, 2018 Report Share Posted April 24, 2018 18 hours ago, Wolf said: I just want to chime in with a positive feedback concerning ebay seller travisspeed939, the guy who has machined Bomber parts and is selling some on ebay. I received my cant disks with center disks, un-anodized raw, machined aluminum as described. They were just as he described and shipped nice and fast. Isn't this basically theft? He's creating a knock-off of something patented? Quote Link to comment Share on other sites More sharing options...
Wolf Posted April 24, 2018 Report Share Posted April 24, 2018 12 minutes ago, trailertrash said: Isn't this basically theft? He's creating a knock-off of something patented? He said Bomber outsourced machining of parts to him, so I'd say if he has parts made that Bomber never paid for he's justified to sell them. But making new replacement parts for sale might be a different matter. I would think that Fin or the Bomber liquidator, yruiz, would be on his case if there were a problem with his current ebay listings. 1 Quote Link to comment Share on other sites More sharing options...
barryj Posted April 24, 2018 Report Share Posted April 24, 2018 22 minutes ago, trailertrash said: He's creating a knock-off of something patented? Just my 0.02 I'm pretty sure Bomber contracted him to machine those and other TD parts..... so not knock off...and more probable left over stock that the Bomber collapse also left the machine shop unpaid. So he's trying to recoup so of his losses also. Quote Link to comment Share on other sites More sharing options...
bobdea Posted April 24, 2018 Report Share Posted April 24, 2018 Yeah, it’s not theft if he built them under contract. Guessing Jim and Angie stiffed him. Kinda seems that way with the random parts he has....... Quote Link to comment Share on other sites More sharing options...
daveo Posted April 24, 2018 Author Report Share Posted April 24, 2018 So if he produces them and sells them, who is it theft from exactly? I don't really know much about this stuff. Can he not machine and sell replacement parts which may fit TDs? Is that somehow against some sort of law? Quote Link to comment Share on other sites More sharing options...
Buford67 Posted April 24, 2018 Report Share Posted April 24, 2018 Where are the parts on ebay? Quote Link to comment Share on other sites More sharing options...
Wolf Posted April 24, 2018 Report Share Posted April 24, 2018 (edited) 15 minutes ago, Buford67 said: Where are the parts on ebay? Just search for seller travisspeed939. There's not much. He's selling mostly machined aluminum parts that have not been anodized like retail Bomber parts. And look at his completed listings - you'll see that he is apparently setting up auctions to fill requests for specific buyers. Edited April 24, 2018 by Wolf Quote Link to comment Share on other sites More sharing options...
Jack M Posted April 24, 2018 Report Share Posted April 24, 2018 51 minutes ago, daveo said: So if he produces them and sells them, who is it theft from exactly? I don't really know much about this stuff. Can he not machine and sell replacement parts which may fit TDs? Is that somehow against some sort of law? If he sells his existing stock that the Callens hired him to make, I don't believe that is theft. If he starts producing new replacement parts to sell, which are exact copies of Bomber parts, that is probably theft of Intellectual Property. I'm not sure if Fin owns the IP or the bank. Probably the bank. Quote Link to comment Share on other sites More sharing options...
bobdea Posted April 24, 2018 Report Share Posted April 24, 2018 3 minutes ago, Jack Michaud said: If he sells his existing stock that the Callens hired him to make, I don't believe that is theft. If he starts producing new replacement parts to sell, which are exact copies of Bomber parts, that is probably theft of Intellectual Property. I'm not sure if Fin owns the IP or the bank. Probably the bank. Pretty sure the bank does, if anyone is interested in the IP please contact Fin though, he gets a cut if he finds a buyer. Quote Link to comment Share on other sites More sharing options...
daveo Posted April 24, 2018 Author Report Share Posted April 24, 2018 (edited) 7 minutes ago, Jack Michaud said: If he sells his existing stock that the Callens hired him to make, I don't believe that is theft. If he starts producing new replacement parts to sell, which are exact copies of Bomber parts, that is probably theft of Intellectual Property. I'm not sure if Fin owns the IP or the bank. Probably the bank. Right. Could he make ones that are not exact copies but similar and fit perfectly into existing bomber hardware let's say for replacement parts or upgrades to existing hardware? Would this still be considered theft of ip? Would be interesting to know exactly what can be done to work around the IP so that replacement parts can be made for existing owners of bomber hardware. Doesn't seem like it is profitable to actually buy the IP, otherwise it'd be bought by now. If no parts can be made I guess it'll eventually just end up like catek. Edited April 24, 2018 by daveo Quote Link to comment Share on other sites More sharing options...
Jack M Posted April 24, 2018 Report Share Posted April 24, 2018 18 minutes ago, daveo said: Right. Could he make ones that are not exact copies but similar and fit perfectly into existing bomber hardware let's say for replacement parts or upgrades to existing hardware? Would this still be considered theft of ip? Highly doubt it would be theft then, I can think of many examples of such activity in other industries like Auto. 1 Quote Link to comment Share on other sites More sharing options...
Lurch Posted April 24, 2018 Report Share Posted April 24, 2018 It has been impossible to buy some Bomber parts new for almost a year. TD owners are currently reliant on fellow hard booters to source vital, (second hand) parts. Hardly surprising someone decided to scratch the supply/demand itch. Acknowledge there is a quantity of some parts still in limbo, but when all that stock is torn asunder by the circling carrion crows, what happens next? I prefer my TD3s to other bindings, so putting the IP arguments aside, it can only be a good thing if I can buy new parts if/when I need it. 1 1 Quote Link to comment Share on other sites More sharing options...
Dan Posted April 25, 2018 Report Share Posted April 25, 2018 Hmm, I would like some 6 degree cant discs but it looks like there's no angle markings on the ones Travis is selling - not an absolute deal breaker, but inconvenient. Quote Link to comment Share on other sites More sharing options...
daveo Posted April 25, 2018 Author Report Share Posted April 25, 2018 Seems like the guy who they outsourced machining to can make a decent side business out of supplying replacement parts for Bomber bindings. Or others could possibly do the same, but he has the technical know-how, cnc cad thing or whatever is used for this stuff, machinery and materials. Perfect. THIS is his eBay store, might be worth contacting him if you need replacement parts. Seeing as IP can be worked around, this may be a good way to stop Bomber stuff from falling into obscurity, like Catek, for instance. OR ... everyone could just buy a pair of F2 bindings and call it a day They are kind of readily available anywhere in the world, as well as spare parts, as well as being reasonably affordable ... *whistles and walks away* Quote Link to comment Share on other sites More sharing options...
workshop7 Posted April 25, 2018 Report Share Posted April 25, 2018 6 hours ago, Dan said: Hmm, I would like some 6 degree cant discs but it looks like there's no angle markings on the ones Travis is selling - not an absolute deal breaker, but inconvenient. The usual markings are there. Quote Link to comment Share on other sites More sharing options...
Wolf Posted April 25, 2018 Report Share Posted April 25, 2018 6 hours ago, Dan said: Hmm, I would like some 6 degree cant discs but it looks like there's no angle markings on the ones Travis is selling - not an absolute deal breaker, but inconvenient. Bomber's cant disks don't have any angle marks either. It's the center disks that are marked, and you're right, Travis' center disks don't have any marks. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.