Pat Donnelly

Keter® Folding Work Table . . . Know anyone who has a Menard's nearby as this is an in-store offer only. https://www.menards.com/main/tools-hardware/tool-storage/work-supports-workbenches/folding-work-table/p-1444436707108-c-19492.htm?tid=6144957104905588725&ipos=1 Same tables set up behind Jim under the tent on the "STORE" homepage http://store.bomberonline.com/ Sam's club may offer these on-line for around $60.00

Look for a copy of Snowboard Life Oct 1999 issue (pg 90). Text of the board review is on line but no accompanying photo.

Happened to me once then I upgraded the stock bolts to stainless and coated the threads to prevent re-occurence. Hex heads are better than a phillips head. http://www.alpinecarving.com/parts.html

I'd go option #1, nearly out of sight and no worry about dropping or spilling stuff down into the ductwork.

Did you sell your BFXR? I really like mine with plates when it is not prime time for carving, from crusty ice to slarving.

Have someone capture a video of you riding then post it up on the forum for some helpful tips to expedite your linking consecutive turns.

Check this from the ride board

March 8TH http://www.firsttracksonline.com/2017/03/08/spring-arrives-in-utah/

Buggs - suggest using a dab of Loctite on the cuff/cant screws.

Austin Smith @ Mt Bachelor http://zolomedia.com/dest-oregon-mt-bach-living/

Might have to give the hot water method a try next time I need to mold my liners. Thanks!

What's wrong with noodles? The ATB pairs well with powder boards and plate bindings set at lower angles ~45f/30r. Powder boards can be fun to ride in softer snow too.

Single pair of thin nylon/poly. Liners alone or a pair of Ultimax Ski Sox

Boot size/volume study . . .http://store.bomberonline.com/Boot-SizeVolume-Study_ep_77-1.html

Deep dive through this thread

Too many good tips and suggestions compiled on Jack's "CARVING PRACTICE DRILLS" though not as easy to find as it used to be? The sequence photo's and instructions from Lowell Hart are great. http://www.bomberonline.com/wp-content/uploads/2015/05/Carving-Practice-Drills.pdf Excuse the dead links, thanks Google THE NORM http://www.bomberonline.com/wp-content/uploads/2015/05/The-Norm-Part-I.pdf THE NORM PART II http://www.bomberonline.com/wp-content/uploads/2015/05/The-Norm-Part-II.pdf

From FirstTracksOnLine.com 01/28/2017 http://www.firsttracksonline.com/2017/01/28/special-state-deals-to-ski-okemo/ Ludlow, VT – Everyone likes to get a good deal on skiing and snowboarding, and Okemo Mountain Resort is offering substantial savings for residents of Vermont, New Hampshire, Massachusetts, Connecticut, Rhode Island, New York, New Jersey and Pennsylvania when they visit on specific midweek days this winter. Okemo’s Wonderful Wednesday and Sunday Solutions lift-access deals have been so well received by Vermont and New Hampshire residents, Okemo has extended similar state-specific offers for the residents of some other neighboring northeastern states as well. Vermont and New Hampshire residents who can show proof of full-time residency can continue to take advantage of special lift access pricing on Sundays (excluding Feb. 19) and Wednesdays (excluding Feb. 22). They can ski or ride from 8 a.m. to 1:30 p.m. on Sunday mornings for $39. Young adults and seniors pay $36, and juniors and super seniors pay $32. Sunday afternoon lift access, from 12:30 to 4 p.m., is $34 for all ages. Lift access on Wonderful Wednesdays is just $45 for all ages and the half-day rate (starting at 12:30 p.m.) is $34 for all ages. Full-time residents of New York and Pennsylvania who visit Okemo on Tuesdays for the remainder of the season (excluding Feb. 21), can purchase a full day’s lift access for just $59. Full-time residents of Connecticut and New Jersey who visit Okemo on Wednesdays for the remainder of the season (excluding Feb. 22), can purchase a full day’s lift access for $59. Full-time residents of Massachusetts and Rhode Island who visit Okemo on Thursdays for the remainder of the season (excluding Feb. 23), can purchase a full day’s lift access for $59. This special price is valid for all ages. Proof of residency in the form of a valid driver’s license must be presented at the time of purchase. Minors must be accompanied by an adult with proof of residency.

I carry a ratcheting pocket driver which was a gift from Snowboard Life with a subscription. The handle holds 5 insert bits. Had to buy some of the hex bits separately which can be found individually or as part of a set; Home Depot, McMaster-Carr, Wiha Tools, Amazon. Much safer riding with this vs a T handle. http://www.the-house.com/da7todre11zz-dakine-tools-tuning.html?gclid=CNWK8tTw4dECFQeSaQod4AIO5A http://www.tognar.com/toko-pocket-driver/ https://www.mcmaster.com/#hex-shank-screwdriver-bits/=1639kpy https://www.wihatools.com/terminator-impact-insert-hex-bits-inch-metric-10-pc-set

Check out the street map page 31 - Jim Callen making a right turn onto Durant http://aspendailynews.co.newsmemory.com/?special=Winter+Guide

Delete function is missed

Liquid teflon http://www.zardoznotwax.com/ bought my puck from http://www.tognar.com/search.php?Search=&search_query=notwax

Had to Google Jeff Grell . . . http://snowboarding.transworld.net/uncategorized/jeff-grell-lands-patent-on-highback/#QDI0lcJ7GQp0houG.97

Never mind