Rob Stevens Posted September 14, 2006 Report Share Posted September 14, 2006 I need an alpine board and the ones I have are too nutty for me. I have a Coiler 18something from 02 and a relic of an Oxygen Proton 18something from before the turn of the century. Both these things are built for a kind of alpine I'm not really interested in. I want to do more EC-type riding at moderate speeds. I looked at the Swoard and it's pricey, but if it's the best one, price won't be a consideration. I'm just interested to hear from anyone who is around my weight (220) and ability (unreal) as to what sort of "freecarve" ride is the "best". A clue about modern boots wouldn't hurt either and low bindings... I don't want any rise or cant. Someone might say that I could read this information on another part of the site, but that would take the fun out of it for me. Also, it is snowing here and my leafy trees are looking pretty sad. Also, ride the bike park at SilverStar in BC. It is better than Whistler. Also, go noboarding this season. Quote Link to comment Share on other sites More sharing options...
bobdea Posted September 14, 2006 Report Share Posted September 14, 2006 you're pushing the limits of anything that the builders that don't do custom rides, maybe get a coiler with a wide waist If I remember correctly Bruce has made a few swoard like boards boots, I gotta say that Raichle with the bomber springs are the best thing going, just get the soft springs. Quote Link to comment Share on other sites More sharing options...
D-Sub Posted September 14, 2006 Report Share Posted September 14, 2006 for flatt(er) bindings have a look at F2 race titanium (intec or standard...not sure what you prefer) and phiokka. bombers have lift built in no matter what, even with flat plates. check the swoard specs, and then look at donek and coiler... bruce definitely makes "swoard like" boards. Quote Link to comment Share on other sites More sharing options...
Neil Gendzwill Posted September 14, 2006 Report Share Posted September 14, 2006 Rob, have you tried any of the modern all-mountain boards with 21.5 or 23 cm waists? They usually have a tighter sidecut than the EC guys like but I expect you could get Bruce or Chris to make you one up with a longer radius. As far as low bindings go, I like the Proflex/F2 step-ins. They let you put in cant with little wedges but it doesn't raise them up very much and you can leave it out entirely. I have the Titanflex which has a cm of lift or so to allow for the damping stuff but the regular ones don't have much, you can see them here. If you'd rather not have the step-in, they make a toeclip version too. I'm still hoping to get in a day with you this year, maybe you can give my AM172 a whirl. Quote Link to comment Share on other sites More sharing options...
C5 Golfer Posted September 14, 2006 Report Share Posted September 14, 2006 I need an alpine board and the ones I have are too nutty for me.I have a Coiler 18something from 02 and a relic of an Oxygen Proton 18something from before the turn of the century. Both these things are built for a kind of alpine I'm not really interested in. I want to do more EC-type riding at moderate speeds. I looked at the Swoard and it's pricey, but if it's the best one, price won't be a consideration. I'm just interested to hear from anyone who is around my weight (220) and ability (unreal) as to what sort of "freecarve" ride is the "best". A clue about modern boots wouldn't hurt either and low bindings... I don't want any rise or cant. Someone might say that I could read this information on another part of the site, but that would take the fun out of it for me. Also, it is snowing here and my leafy trees are looking pretty sad. Also, ride the bike park at SilverStar in BC. It is better than Whistler. Also, go noboarding this season. Many good one to try but before you buy I'd suggest you try Prior's 179 4WD. It is a 21.5 waist and loves any kind of snow. Oh Oh Can open -- worms everywhere!! Quote Link to comment Share on other sites More sharing options...
tex1230 Posted September 14, 2006 Report Share Posted September 14, 2006 Donek makes the G-force Blade, which is VERY similar to the Swoard from what I hear. they'd probably do one for you without having to pay the overseas shipping... Quote Link to comment Share on other sites More sharing options...
Donek Posted September 14, 2006 Report Share Posted September 14, 2006 We're launching our blade series this year. It's an EC board in 2 sizes and 3 flexes each. Nothing on the site about it yet, but I'm happy to answer any questions if you like. Quote Link to comment Share on other sites More sharing options...
Jack M Posted September 14, 2006 Report Share Posted September 14, 2006 What makes you think you want to ride flat/flat? And if you really do, Bomber TD2s with flat discs are pretty low. Lower than TD1s. Quote Link to comment Share on other sites More sharing options...
Neil Gendzwill Posted September 14, 2006 Report Share Posted September 14, 2006 We're launching our blade series this year. It's an EC board in 2 sizes and 3 flexes each. Nothing on the site about it yet, but I'm happy to answer any questions if you like.Cool, can you let us know what the specs are for the two different sizes? Length, width, sidecut, running length - that sort of thing. Are you doing anything different in construction or flex pattern compared to your other boards? Quote Link to comment Share on other sites More sharing options...
BlueB Posted September 14, 2006 Report Share Posted September 14, 2006 I looked at the Swoard and it's pricey, but if it's the best one, price won't be a consideration. Cheap alternatives to sword: Oxygen Proton, Burton Ultraprime, Burton Speed. Even my Generics IQ... But I'm not too sure for your weight... I rode someones Coiler AM172 for few runs and I had feeling that it would probably EC too. Most low speed friendly board I tried is my ancient Hooger Booger Grinder. I guess it's the combination of soft flex and medium side cut (11+ m). It will EC evan on steeper green runs. It becomes very squirly at higher speeds. A clue about modern boots wouldn't hurt either and low bindings... I don't want any rise or cant. Besides the ones listed above, look into Snowpro Race, too. A bit on soft side (but better than Burton) and inexpensive even when bought new. Boris Quote Link to comment Share on other sites More sharing options...
Jon Dahl Posted September 14, 2006 Report Share Posted September 14, 2006 If you can find a Burton Speed 168 it's called the poor man's Swoard, very similar in shape. I'd be tempted to wait on the Donek, though, the Axxess kinda felt to me like a good candidate,too, in the 167 or the next one up in length. Snowpro race series have 6 mm bails, and are pretty durable, and allow some flex, but won't work on the Burton 3 hole pattern w/o making your own center disc to match, and doing a little grinding on the base plates to make it work. I've also got some cut down mondo 27 Raichle 123's that will allow some ankle flex, that will be for sale soon (my old backcountry boots) Quote Link to comment Share on other sites More sharing options...
csquared Posted September 15, 2006 Report Share Posted September 15, 2006 Rob: Forget any of the production boards discussed above. They just won't work for someone of your (ahem) stature. You really need to go custom. I am sure Sean could build you a very appropriate board. Chris Prior is also eminently competent. However, Bruce at Coiler is the only one in North America that has had a few years of making and riding the EC type boards. Given that he is a fellow Canadian (and a hell of guy too), why would you go elsewhere? You're sure you want an EC board? There are many alternatives that will carve very sweetly at sub-sonic speeds. The EC boards are not exactly what one would call all-round or all-mountain boards. Many of us get what you seem to be seeking with 12 - 13 m sidecut radius boards. They're very turnable at less suicidal speeds. The key is to get one built custom that is suitable for your weight, height, generaly abiliity level, and ambitions. Quote Link to comment Share on other sites More sharing options...
Fleaman Posted September 15, 2006 Report Share Posted September 15, 2006 Hey Rob, I will chime in here too. Coiler AM is the way to go. you can get it with the 23 cm waist and it carves really nice while going slow. You might want to get the 178 for your weight. I am 240 and have the 172 but like a shorter board for tree riding. I have no problem laying my own style of EC with the AM and also when the conditions get tough, you can still use it for the rest of the day instead of switching to a softie setup. Order it now, you might get one by March HAHAHAHAH Quote Link to comment Share on other sites More sharing options...
tex1230 Posted September 15, 2006 Report Share Posted September 15, 2006 since nobody has said it yet, you can send that old unused coiler 18something out to me - I promise to ride it like a rental! Quote Link to comment Share on other sites More sharing options...
Mike T Posted September 15, 2006 Report Share Posted September 15, 2006 If you want to carve at moderate speeds, just get something with a smaller sidecut radius. In addition to the EC-style decks and the AM-style decks there is always the Donek FC 171/175 / Coiler RC 175/180 / Prior WCR 175 class... alpine decks with sidecuts in the 11 - 12m range. Sean/Bruce/Prior could build one for your weight, and the 11-12 sidecut range is very nice for carving at sub-light speeds while still offering decent stability. Bryan - I think the Tinkler with its 15m sidecut would still be a rocket, even with the wide waist ;-) Quote Link to comment Share on other sites More sharing options...
Buell Posted September 15, 2006 Report Share Posted September 15, 2006 Bryan, From the Mt Rose video? If it was the Donek 203 Ong GS, the side cut is 17 with a 22.5 waist, according to the Donek website. Snow at Timberline! :):):):) Buell Quote Link to comment Share on other sites More sharing options...
Mike T Posted September 15, 2006 Report Share Posted September 15, 2006 Yes, Thanks Mike, I guess I some how missed the point. Rob is looking for a shorter, wider boards with more side cut to slow down. Makes sense now. Although some of the best ECing I have seen was on a 203 , fairly wide board. However , I can't recall the side cut. The "Quest" continues. Yeah, but was that Bordy, who, from what I saw at SES, could do pretty much anything on any deck? Quote Link to comment Share on other sites More sharing options...
big mario Posted September 15, 2006 Report Share Posted September 15, 2006 Yeah, but was that Bordy, who, from what I saw at SES, could do pretty much anything on any deck? I've seen him ec on a skateboard. mario Quote Link to comment Share on other sites More sharing options...
Rob Stevens Posted September 15, 2006 Author Report Share Posted September 15, 2006 You've got me pegged, there. I could make it happen on the bigger gear, but I don't want to fight it, or have it be a violent experience. The ride I'm looking for will like middle of the road speed, turn size and pitch. It won't have to do all mountain riding either. The only time this will come out is when the groomers are on and it hasn't snowed in a few days. Powder day... Summit 800 and the Noboard (no rope, of course) Freeride... 174 Fastback or 162 Radon. Freecarve... ? ... though I'm alot closer to making a call than I was before. You guys are an incredible resouce. Thanks very much, all. Quote Link to comment Share on other sites More sharing options...
r_starr Posted September 17, 2006 Report Share Posted September 17, 2006 Bryan,From the Mt Rose video? If it was the Donek 203 Ong GS, the side cut is 17 with a 22.5 waist, according to the Donek website. Buell James let me borrow that 203 Donek one morning, that beast rides faster than I ever want to go again in my life! :) While the length and sidecut are certainly contributing factors, I think what made the Donek such a fast ride for me is that the flex of that board is really stiff; you have to be way on top of it and initiate the turns exactly right to get that board to bend & turn. EC carvemaster James Ong obviously rides it with ease and is able to control the speed, I have a lot of respect for someone who makes riding that monster look easy, in contrast I found it to be demanding and I learned that I'm better suited to a softer-flex more forgiving board. Compared to James's Donek, my 175 Swoard feels like moving in slow motion, which works out great for me as I like taking it easy. James also let me ride his 186cm, 15M SCR Coiler, my perception is that since it's not a stiff board it can be cranked into similar sized turns, with similar speed, as the 13.3M SCR Swoard, or you can ease into the turn and allow the arcs to widen. I was so stoked with the performance of James's Coiler that I asked Bruce make me a similar one which arrived in April, I'm looking forward to trying it out soon. Bottom-line, I think for speed control that board-flex is as important a variable as anything else, IMHO only. Rob Quote Link to comment Share on other sites More sharing options...
www.oldsnowboards.com Posted September 17, 2006 Report Share Posted September 17, 2006 Bryan,From the Mt Rose video? If it was the Donek 203 Ong GS, the side cut is 17 with a 22.5 waist, according to the Donek website. Snow at Timberline! :):):):) Buell You are sharp! Yes, that was my reference. I am thinking that I would love to see some of the expert EC riders put the Tinkler "Wide" through it's paces. Might be a bit stiff, however , under the right rider it would rule. For those that have enjoyed the short video of some riding EC style at Mt Rose this past year, allow me to introduce the other amazing rider, Rob. Both these guys SHRED!!. Rob, is the first rider you see cranking turns in the video, then James (Imagine, riding around , then bumping into Rob, and then the next thing I see is THIS!!) I had not seen James since SES, and only saw a few glimpses of him riding once we hit the hill. So, basically you are seeing what I saw. Riding with James and Rob definitely "Picked up the Pace" on this day!! Here is the video , here is a gallery of the day at Mt Rose. Thanks again Rob and James for showing me around! I had a blast! Bryan Oh yeah, back the subject of the thread. Stevens , you will appreciate this. I was riding this 1711 BLADE. Perhaps it would fit your requirements I could only get my stance about 18" max. Going from a Tinkler 185cm , TD2s,A600s to a 89 Sims 1711cm , original high backs , talk about contrasts. Might has well got out the "No Board". Hows that for full circle?? :) Quote Link to comment Share on other sites More sharing options...
James Ong Posted September 18, 2006 Report Share Posted September 18, 2006 Hey Brian, How does the wide Tinkler's weight compare to other boards of approximately the same size? I noticed that the Prior metal boards are a lot lighter than their wood core counterparts. If you don't sell it, can I try it out sometime? Quote Link to comment Share on other sites More sharing options...
www.oldsnowboards.com Posted September 18, 2006 Report Share Posted September 18, 2006 Sure James, love to see you on it. I can't promise I will still have it by winter. Bryan Quote Link to comment Share on other sites More sharing options...
Bordy Posted September 19, 2006 Report Share Posted September 19, 2006 Great little vid! Way to keep the fall stoke on! That 203 is a great board I think I spent more time pointing that thing then I did turning it at SES. Quote Link to comment Share on other sites More sharing options...
James Ong Posted September 19, 2006 Report Share Posted September 19, 2006 That 203 is a great board I think I spent more time pointing that thing then I did turning it at SES. Actually , you were riding it so hard i was kinda worried you might damage it somehow. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.