MUD Posted November 28, 2008 Report Share Posted November 28, 2008 Hey, My UPZ's are really tough to get the liners back in. How often do you take yours out? Do you rely on a boot dryer instead? I actually took a pretty good chunk off my finger today. Quote Link to comment Share on other sites More sharing options...
Guest Posted November 28, 2008 Report Share Posted November 28, 2008 I take the liners out of my UPZs only if I have to. Quote Link to comment Share on other sites More sharing options...
D.T. Posted November 28, 2008 Report Share Posted November 28, 2008 I take the liners out of my HSP's at the end of every day I ride. Allows them to get dry all the way through. Quote Link to comment Share on other sites More sharing options...
b0ardski Posted November 28, 2008 Report Share Posted November 28, 2008 I usually pull the liners on raichles & blax & ski boots if I'm going to use them the next day or so, especially on wet snow days I've stopped putting the thermo flex on boot driers that use heat, I feel that it deteriates the remoldability, they dry nicely on the coat tree over night. Often take the foot bed out even when I leave the liners in. Quote Link to comment Share on other sites More sharing options...
nutmeg Posted November 28, 2008 Report Share Posted November 28, 2008 I take them out after every ride. It is rather easy with the Head Stratos. Quote Link to comment Share on other sites More sharing options...
crucible Posted November 28, 2008 Report Share Posted November 28, 2008 On boots that have difficult liners to get out, I leave the liners in but crumple up balls of newspaper and stuff them in after every day of riding. It's a trick that a ski patroller at Jackson Hole showed me ten years ago. The newspaper wicks up all of the moisture inside of the liners- usually by the next morning they're GTG. Quote Link to comment Share on other sites More sharing options...
queequeg Posted November 28, 2008 Report Share Posted November 28, 2008 On boots that have difficult liners to get out, I leave the liners in but crumple up balls of newspaper and stuff them in after every day of riding.It's a trick that a ski patroller at Jackson Hole showed me ten years ago. The newspaper wicks up all of the moisture inside of the liners- usually by the next morning they're GTG. Wow - that's a brilliant idea! I'm never packing boot dryers again. I don't know about removal, but for insertion - for a tough to insert liner/boot combination here is something that can be very helpful: take a page out of an old magazine and slide it down the back of the boot before sliding in the liner - it will smooth out the ridges and other friction causing elements in the boot plastic, permitting you to slide the liner in smoothly and easily. I imagine you could permanently affix a piece of cloth or something in there for hard to remove liners. Personally, I rarely remove mine. Quote Link to comment Share on other sites More sharing options...
Corey Posted November 28, 2008 Report Share Posted November 28, 2008 Every day I ride. I find that there's almost always some snow packed between the liner and the shell. Quote Link to comment Share on other sites More sharing options...
Dan Posted November 28, 2008 Report Share Posted November 28, 2008 I only take mine out to dry if I'm traveling and don't have access to a box fan. At home, I just lie my boots down in front of a box fan on "high" for a couple of hours. (i.e., boot openings facing the fan.) This dries them out perfectly, and I don't have to use heat -- like b0ardski I'm also a little leery of how that would affect the moldable liners. Quote Link to comment Share on other sites More sharing options...
yyzcanuck Posted November 28, 2008 Report Share Posted November 28, 2008 I take my liners out of the boot shell every time I take my feet out of the liners. Quote Link to comment Share on other sites More sharing options...
xxguitarist Posted November 28, 2008 Report Share Posted November 28, 2008 I take my liners out of the boot shell every time I take my feet out of the liners. The same tends to happen to me whether I want it or not! Quote Link to comment Share on other sites More sharing options...
bumpyride Posted November 28, 2008 Report Share Posted November 28, 2008 Out every day and at lunch if I sit down with friends. Thermoflex just slides in and out without a worry. Another great reason for the T-flex aside from feeling like your feet are in a supportive bedroom slipper. Quote Link to comment Share on other sites More sharing options...
mr_roboteye Posted November 29, 2008 Report Share Posted November 29, 2008 I lived in Whistler for six years (100+ days on snow a year) and took my boots liners out as soon as I got home after every day on the hill. I found water would sometimes collect in the void space beneath the footboards in both ski and (hard) snowboard boots. Burton fires' BTW. later, Dave R. Quote Link to comment Share on other sites More sharing options...
LeeW Posted November 29, 2008 Report Share Posted November 29, 2008 oh yeah, taking the liners out of my UPZ whenever I switch between intec and DIN sole is a bitch, man. I do it often -- twice a week. Quote Link to comment Share on other sites More sharing options...
NateW Posted November 29, 2008 Report Share Posted November 29, 2008 I take them out to try every time I come home from riding. With Raichles its trivial to get the liners out, UPZs take some wrestling. But as others have noted there's always water and/or snow in there. They get stinky enough as it is, I'm sure they'd reek more and faster otherwise. Quote Link to comment Share on other sites More sharing options...
SEJ Posted November 29, 2008 Report Share Posted November 29, 2008 I use to do it every time I rode with my winds. Top cuff finally tore loose and stopped me from doing it any more. I now have Indies with thermoflex, no issues pulling the liner apart. If I have my boot dryer, (The convection type, very little heat) I don't pull them. If not, I have to pull them or they will be soaking wet the next morning. Quote Link to comment Share on other sites More sharing options...
mike g. Posted November 30, 2008 Report Share Posted November 30, 2008 I take mine out everynight, when I get home. Then I take the tongue out. Then put it all back together that night, when they are dried. So I don't have to do it in the morning. It's a pain, but it works for me, and it saves my fingers. Mike ________ Hilux Surf Quote Link to comment Share on other sites More sharing options...
Mike T Posted November 30, 2008 Report Share Posted November 30, 2008 Almost never. This gets them dry within a couple hours and keeps them from smelling at all. Room-temp air, so it doesn't affect Thermoflex liner molding. Quote Link to comment Share on other sites More sharing options...
willywhit Posted November 30, 2008 Report Share Posted November 30, 2008 Nordica SBH's I had 2 sets of liners, always pulled out the dank and replaced with dry and fresh ie always had a pair drying. If I slam them in there hard and quick enough it's a bloody knuckle or 2, ya get used to it :rolleyes: Now, I'm dialing in Head Stratos, not as easy to remove the bladders. <object width="425" height="344"><param name="movie" value="http://www.youtube.com/watch?v=4hcdd05Y914&hl=en&fs=1"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/watch?v=4hcdd05Y914&hl=en&fs=1" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="425" height="344"></embed></object> Quote Link to comment Share on other sites More sharing options...
b0ardski Posted November 30, 2008 Report Share Posted November 30, 2008 +1 on swapping liners. I use the Peet convection drier too. But if left over night the liner gets pretty warm; warm enough to soften the thermo foam material. This is why I've started air drying or using a hair drier on no heat setting for moldable liners. Convection works great on the inside of the liner but can leave the outside of the liner wet after a heavy snow day. Snow inbetween the shell & liner may be more of an issue with older SB series Raichles because of the way the tongue overlaps at the ankle, but the liners come out easily. My 1st Raichles got rust & corrosion built up on the Tnuts under the foot plate before I realized how much snow gets into the shell. My blax/heads are harder to remove but after seeing rusty Tnuts I always pull them after wet days. Quote Link to comment Share on other sites More sharing options...
AK in PA Posted November 30, 2008 Report Share Posted November 30, 2008 Almost never on my UPZs, unless they're unusually wet "and" I plan to ride the next day. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.