D.T.

I have a D1 6’3” for sale. It’s in as-new condition. $600 + shipping.

I have a Cheater 200 for sale. I have multiple longboards, so this thing has only been ridden 2 days. There are slight binding marks and a few scuffs in the topsheet. If you’re interested, DM your email address to me and I can send more photos. edit: inadvertently posted the first photo, can’t figure out how to remove it…

SOLD - Dupraz D1 6’3” As the name implies, this board is 6’3” (193cm) long. The board has a wide nose with turned up, surf board-like tip, narrow waist, and pintail resulting in a board that likes to climb on top of the powder and run. The board has a rocker profile with a relatively short effective edge. The 6’3” is the stiffest of the D1 series. Specs are: Nose width: 33cm Waist width: 28cm Rail width: 31cm EE: 134cm From the photos, you can see this board looks new, that’s because it’s only been ridden twice. The powder gods have not been good to me the last few years, and it’s time to move on. PM is the quickest way to contact me. Price: SOLD Willing to ship, buyer pays actual shipping cost from 80112.

Stranda Cheater 200cm Here is the description from the Stranda website: “Go big or go home! –––––––––––––––�DIRECTIONAL CARVING�PROGRESSIVE SIDECUT�BAMBOO TOPSHEET�CORE: ASH/POPLAR�FLEX: 8/10 “Cheater 200 is a limited edition version of it’s smaller brothers. It shares the same basic outline but has a revised, longer rockered nose in combination with Low Camber and Tip-Tail-Rocker. Our goal was to reinvent the big mountain snowboard adding a big dose of surfy playfulness. The result is an easy turning freeride board that even handles frontside resort riding, albeit with no speed limit. Ride it in powder and you will feel how the groundbreaking design comes in to play with perfect balance. Three layers of rubber dampening, make for a ride smooth as butter on hardpack. The nose rocker makes turning easy and creates float. Additional carbon stringers in the tail section adds longitudinal snap. A fast and maneuverable board for cruising, carving and big mountain riding. “SPECIFICATIONS Length: 200 Core: Ash/poplar Construction: Triax glass with carbon torsion rods Topsheet: Bamboo Profile: Low camber with Tip-Tail-Rocker. Semi swallow tail Base: 5920 Electra base” Dimensions are: Nose width: 32.2cm Waist width: 25.4cm Tail width: 30.5cm EE: 169.7cm The board has been ridden 2 days. As shown in the photos, there are slight binding marks and a few scuffs in the topsheet. Hit me up for more photos. PM is the quickest way to contact me. Price: $650 USD Willing to ship, buyer pays actual shipping cost from 80112.

I’m selling a custom-built Virus Raceworks 183cm alpine snowboard. This is a titanal board built during the 2012/2013 season. It has a variable side cut radius, the average radius is ~15m. The waist is 20cm. The board would be best for a heavier rider, e.g. 190+ lbs. The board has been ridden approximately 30 days. The top sheet does have some lift line and chair lift rash - see photos. There are a few spots of light surface rust of the edges; all of it will come off easily with a quick edge tune. There are a few spots of the topsheet where the screws from the bindings bit into the topsheet; as a result there are small knicks in the topsheet, but the titanal is not damaged. Hit me up for more photos. PM is the quickest way to contact me, I’m not on the site very often. Price is $600 firm. That’s half the price I paid for it. William g to ship, buyer pays actual shipping cost.

This board would make Ronco proud - just set it and forget it. Set the edge, hang on, don’t get behind as the board accelerates through to turn, transition, repeat until your legs are shot! The board is stable at any speed. Tip the board on edge, the nose engages, and the board make any shape turn, consistent with how you drive the board.

I’d like to tell myself that she’s actually been listening when I talk about driving the knees and really putting the board on the edge, but I know it’s just a lucky coincidence! This is probably the best turn I’ve ever seen her make!

Best advice - find a boot that fits your feet and happens to be stiff. Riding hard boots at low angles kills my knees. I rode Malamutes for years, then switched to Head Sevens, and now Head Eights. Unless you’re absolutely in love with your K2’s, I’d say move on.

I’ll take them. Let me know where to send the $$$.

Yes, the board is still available. It’s difficult to say whether the flex would be appropriate for you. Your best bet wild be to contact Brice at Coiler, provide him the serial number, and get his take.

Yes, it’s sold.

What Mr. E said - holy mini session! Off the top of my head, attendees were: Mr. E, Johann, slopestar, Katie, Shelly, HillB, Ice, yasu, Odd Job, Arne, big Mario, inkaholic, Carvin Marvin, and yours truly. It was a fun group and great to see everybody tearing up the hill!

They are yours. PM sent

SOLD - I’m selling a set of Virus Powerlock III step-in bindings. this binding is essentially the love child of a thick aluminum Phiokka baseplate and the F2 boot interface. The bindings come with a single 3° lift block. As you can see on the step-in receivers, the wear is minimal, these bindings were hardly used. One rubber disc that the boot saw sits on is missing. SOLD - The price is $275 shipped in the US via USPS priority mail.

SOLD - I’m selling a pair of F2 Titanflex Step-In bindings. They are size S/M. The bindings are currently configured with 6° and 3° lift blocks. I made these blocks out of Delrin when I had access to a machine shop. The wear marks on the step-in receivers are minimal, indicating the bindings have barely been used. SOLD - The price is $175 shipped in the US via USPS priority mail.

SOLD - I’m selling a pair of F2 Titanium Standard bindings, size S/M. The bindings are set flat with no toe or heel lift on either binding. It appears as though I am missing one of the mounting screws. I will dig around to see if I can find it. SOLD - The price is $175 shipped in the US via USPS priority flat rate.

I’m selling this board for a friend. This is 165cm Coiler Race Carve Classic (RCC). It was built for a ~130lb female rider. She rode the board less than 5 days; she was never comfortable on it. The RCC is a single sidecut radius (not VSR). The waist is 18cm. The board was built during the 2007/2008 season. The price is $400. I will ship the board at the buyers expense. Buyer must take care of the logistics, send me a shipping label and I will drop the packages board off at the chosen carrier.

I’m selling a custom-built Virus Raceworks 183cm alpine snowboard. This is a titanal board built during the 2012/2013 season. It has a variable side cut radius, the average radius is ~15m. The waist is 20cm. The board would be best for a heavier rider, e.g. 190+ lbs. The board has been ridden approximately 30 days. The top sheet does have some lift line and chair lift rash - see photos. There are a few spots of light surface rust of the edges; all of it will come off easily with a quick edge tune. There are a few spots of the topsheet where the screws from the bindings bit into the topsheet; as a result there are small knicks in the topsheet, but the titanal is not damaged. Price is $600 firm. That’s half the price I paid for it. I Will ship the board, but it’s the buyers expense and responsibility to figure out the logistics and send me a shipping label. I will then drop the board off at the buyer’s carrier of choice.

Sandy - In the past, if you purchased a ‘21/‘22 pass at that time of the year, Loveland would allow you to use that pass to finish out the ‘20/‘21 season.

@Jack M Yes, I still have the SL.

Life has become a little more interesting this week...

Another morning session with Big Mario and Inkaholic. Big Mario getting his carve on!

Forgot to mention, felt something like a tremor when I got a couple miles away from the park. Wasn’t sure if it was a Cat D10 dozer that was moving some dirt nearby or if Bigs had an unintended encounter with the ground!

Summer carve session with da boys.

Sadly, I'll be working on Sunday instead of riding. It's especially annoying since I just received and installed my UPZ pieces parts.