Jump to content

MacSkiddin

Member
 View Profile  See their activity

  • Posts

    200

  • Joined

  • Last visited

  • Days Won

    3

 Content Type 

Everything posted by MacSkiddin

  1. MacSkiddin
    The third pic in the original post shows the camber in relation to a US penny, which is about 33% taller than a Canadian penny. Seriously though, it has something over a centimetre in camber, which in my experience, F2s retain really well. Plus this board wasn’t ridden that much, owing to me having too many boards (14 at one point). So it has some pop.
  2. MacSkiddin
    Price drop to $US150 for a versatile, lively, all-mtn carver. Storage wax will be scraped off prior to shipping.
  3. MacSkiddin
    Approximately $USD46
  4. MacSkiddin
    When I bought it off a fellow BOLer, it appeared like it may not have even been ridden. I think it is an '05 or '06 model. Specs, as far as I can tell, are approximately: Overall: 1650mm Effective Edge: 1400mm Nose Width: 280.2mm Waist Width: 228mm Tail Width: 280.2mm Sidecut radius: 9m Recom. Stance: 520mm Recom. Angle: 45 / 35 Offset: 20mm Target group: 75+ KG I weigh 160 lbs and the board works well for me.
  5. MacSkiddin
    Price drop - $150 US plus shipping
  6. MacSkiddin
    Well, still planning to hit Martock tomorrow night.
  7. MacSkiddin
    I’ve had occasional lower back pain similar to what you describe, brought on by hard heel-side slides/stops that occurred due to proximity of trees or lift pole. I have self-diagnosed as herniated disc. What has worked for me is: 1) rest; 2) planks - front, side, back; 3) once things are feeling better, Roman chair plus continuation of front and side planks. My theory is that by building the muscles on all sides of the discs, once the inflammation has subsided, the muscles will be better able to provide counter-pressure against the compression forces that squeeze discs outward during these really hard stops.
  8. MacSkiddin
    I prefer to listen for the flap of the open-coat straightliner.
  9. MacSkiddin
    Looks like 25 cm exactly
  10. MacSkiddin
    SOLD - Volkl Cross 67. 167 cm. Very versatile all-mtn carver/gen 1 BX In good shape. $US 130 plus shipping more pics available.
  11. MacSkiddin
    Versatile all-mtn/freecarve board in very good shape. Covered in storage wax in pic Price drop: $150 US plus shipping pm me for more pics
  12. MacSkiddin
    I’ll take the 174. Sent you a pm Dave
  13. MacSkiddin
    SkiDad takes great care of his gear. I haven’t ridden this board, but I’ve seen SkiDad carve up icy King’s Landing and Hayburner at Sugarloaf. Even the steepest sections at the bottom. Buy and ride with confidence!
  14. MacSkiddin
    I have one of these. Super versatile, super fun board!
  15. MacSkiddin
    Bump.
  16. MacSkiddin
    Board is sold. Thanks, Russ!
  17. MacSkiddin
    Still available.
  18. MacSkiddin
    The board says it has a 3-D sidecut radius, which I take to mean it's variable. However, if I compare to my other boards, this one feels like it averages 9-10 metres. Maybe others know more?
  19. MacSkiddin
    Pm sent
  20. MacSkiddin
    It does say they're in perfect condition ...
  21. MacSkiddin
    For sale is a Volkl RennTiger 163. This is the board I should've bought first. A great, forgiving board for learning, and just fun all-round and for crowded or narrow slopes. Price reflects that while the board is in good condition, base and edges are getting a bit thin. I've owned this for several years, ridden it a lot, and only hand-tuned, so there's still lots of life and snap in it. The last base grind would've been pre- my ownership, but obviously, it's had at least a couple. I made one ptex repair to the base which is indistinguishable. Base is coated in storage wax. Binders not included. A great board, especially for a beginning or lighter rider. I am 160lbs and loved it, but it would work for someone considerably lighter or a little heavier.
  22. MacSkiddin
    Nidecker still available
  23. MacSkiddin
    Sold! Thanks, Reid!
  24. MacSkiddin
    Bump
  25. MacSkiddin
    Bump
×
×
  • Create New...