yamifumi

I had Allflex plate and I liked it and hated it at same time. With the plate, you need to be always charging as it makes the board very stiff. Where the plate shined is through crud, ice condition or when you are charging hard. I could not justify keeping it as I am freecarver and not racer so I sold it. Also it was heavy so I didn't want to have that all day under my feet :p. Corey, are you talking about F plate or A plate?

I had deeluxe indy, then I had UPZ RC-10. the thing i didnt like about deeluxe was that I had heel lift even with custom liners. I switched to UPZ RC-10 and no more heel lift! It has good fit but stock liner is junk after couple days. I have mondo size 26 and I used 26/26.5 and it was tight fit. But I never had fully custom liner like Palau on UPZ RC-10. If you are mondo size 27.6 then maybe 27/27.5 boot would fit good? I would talk to UPZ rep in Canada. He helped me pick out the size.

what is the waist width?

SOLD!!

I had exact same problem when i had kessler. I had white kessler and it had thick Ptex and stock F2 binding screw was too short. I bought exact same size screw but longer. Just make sure you dont by too long and damage the bottom.

Sorry, I forgot to put it in there. I included in the first post: 6 deg cant disk for both. thanks

I have TD3 SW (standard bail) for sale. I bought it last year from bomber. It is 6 deg cant disk on both. it has yellow pads and yellow ring. It is in great condition besides marking from the boots. Price: $SOLD shipped within US (except Alaska or Hawaii)

Great idea. Donated it!!

Nice great news!!

I think Jim is riding Oxess XXR. He must be hauling butt and bending it nicely.

I have been a member here since 2004 and the community here has helped me so much. If there is anything I can do, let me know! I am looking forward to the unofficial meet up in Feb at Aspen!!

Price updated!!

How is the runs in Keystone? I had Epic pass last year and went mostly to Beaver Creek, Breck, Vail. Out of those 3, I liked Beaver as it had most groomed runs.

Interested in SG or Allflex plate? I am open to trades + cash, etc

The boot and its part is sold. binding is still available!!!!

1.) UPZ RC-10 (2016) is used for 2 seasons (~20 days). Price: SOLD - Includes many upgrades: UPZ Power strap Shoxxter Plus, DGSS spring system (Have both blue & green spring), UPZ tongue set (Red - softer) - All the originals are included (as seen in picture below) 2.) F2 Race Titanium Binding (Size M) - Used for 2 seasons (~20 days). SOLD - All Parts included (as seen in the picture) and even comes with original box + instructions - As I ride 6" toe lift on leading foot & 6" heel lift on trailing foot, I have extra set of lift wedges. All the item has no major issues and in great working conditions besides cosmetic wear from usage.

UPDATE: This season has been great in terms of trying out different set up. I am finally at the location where I can go out to the slope a lot so I had time to adjust, ride, record the set up, etc. At the beginning of the season, I had TD3 SW and struggled to center the UPZ (mondo 26) on it and toe bail didn't seem to snap on to the boot when engaged. After 2 days of outing, I decided to sell it and try something different. I tried SG binding, F2 binding, and have tried TD2 while back. At first, F2 was my go2 binding as it centered fairly well but I felt it lacked stiffness that I wanted. SG binding was good as it was stiffer but again it was difficult to center for my size boots (mondo 26), it just didn't carve as I did in F2 bindings. Faster forward to now, I decided to just give TD3 SW one more try after talking to Jim and Angie at ATC. I didn't flip the toe bail but flipped the heel bail (as heel bail dictates the location of boot's center) and put the heel bail out to the max which had center of boot 3~4mm away from center of the binding toward the toe. In addition, I used 6 and 6 for both toe and heel lift with yellow E-pads and yellow ring. The TD3 SW felt really great and it was just the stiffness I was looking for and I felt response was immediate. Also, we had 4-5in of fresh snow over night, so it became slight choppy after a while. I usually switch into skis when slope gets choppy as it just isn't fun carving it but the weight of TD3 SW plus the yellow rings did the job and I was able to carve through it. Conclusion: after trying different set ups and bindings, I ended up where I began and really happy with TD3 SW.

I am interested, message sent

Sorry, it was opposite. If you have outside disk's arrow facing all the way down then you will have outward cant.

I felt the same way about my leg and i had pressure point on outside of the boot so i set the outside of disk with arrow facing all the way up (this way it moves the cuff outwards then no more pressure. you have the most outward cant if you have outside disk with arrow facing all the way up and the inner disk with arrow facing all the way down. I will check one more time when i go home .....

Still have SG Full Race titan and allflex!!!

I have never seen the point 950 in person but is there is any capability to have lateral canting on the boots like UPZ or deeluxe? I like my UPZ to have dials on outside of the boots to have outward cant and inside dial to be neutral. I assume new point 951 do not have any capability to do outward cant??

SG cult SOLD!!!

The kessler and gecko has been sold!!

**I hope to sell as a set (plate + snowboard) but i can sell separately. ALL SOLD!!! 1.) SG Full race titan 163cm 16-17' model year. This already has Allflex inserts. Snowboard itself retails for $1150. There are scuff marks from binding and plate system but the base is in great condition. Only used it for a season as I bought it in Nov 2016. Price: SOLD **Great price for gret product!! If you need more picutre, I can send it. 2.) SG Cult 159cm 16-17' model year. This can be used with either softboot or hardboot. I used it for pow days with my hardboot. It can carve on groomers and float in pow days. I only used for a day. It is in excellent condition Price: SOLD!! 3.) Kessler 162cm (not sure what the model year is). Comes with gecko plates. Waist width ~19.5cm. The top sheet has some wear and nose and tail has minor delamination but it doesnot affect the ride at all and the base is in great condition. Gecko plates include both red and orange (softer) bumpers. Price: SOLD!! (includes Gecko Plate) I can get you closer picture upon request for serious buyers. If it doesn't sell then I will just keep it.