Hans Posted April 12, 2008 Report Share Posted April 12, 2008 Was just surfing over the net and ran into this and translated it from russian into english (ISPO): Bomber Renovated model TD3 with the new form of edging-disk and damping disk (there is no photo). http://www.genza.ru/?p=news&id=54 Any info on this? Quote Link to comment Share on other sites More sharing options...
Hans Posted April 13, 2008 Author Report Share Posted April 13, 2008 Would be nice to have an integrated suspensionkit and variable cant and lift system in the TD3. We'll see. Quote Link to comment Share on other sites More sharing options...
Jack M Posted April 13, 2008 Report Share Posted April 13, 2008 it was only a matter of time. :) It will have active suspension, nano-adjustable cant/lift, combination boot warmer/sole de-icer, and the piece de resistance, a blue-tooth data acquisition module with GPS, thermometer, altimeter, and g-load sensor. Quote Link to comment Share on other sites More sharing options...
KingCrimson Posted April 14, 2008 Report Share Posted April 14, 2008 I'll only buy it if it includes break away pieces so that I fit in when I go to Russia. Quote Link to comment Share on other sites More sharing options...
Gleb Posted April 14, 2008 Report Share Posted April 14, 2008 whoa, ive never seen white UPZs. Cool. Quote Link to comment Share on other sites More sharing options...
C5 Golfer Posted April 14, 2008 Report Share Posted April 14, 2008 I'd sure appreciate Dynamic Stability Control - and cup holder. Quote Link to comment Share on other sites More sharing options...
martyagt4 Posted April 14, 2008 Report Share Posted April 14, 2008 Can I get one with the "Adds loads of talent" option? I think the lack of that on my Snow Pros is holding me back. Quote Link to comment Share on other sites More sharing options...
Dave ESPI Posted April 14, 2008 Report Share Posted April 14, 2008 soooo.... uh...... um........ ( looking at the ground kicking the dirt around) um.... you gunnah have any test / demo models that need some north east improper use and abuse? :rolleyes: Quote Link to comment Share on other sites More sharing options...
Gecko Posted April 14, 2008 Report Share Posted April 14, 2008 I hope there is a new TD3...that would mean that TD2 will go on sale as everyone trys to fund their switch to the lastest flavor:D Quote Link to comment Share on other sites More sharing options...
Mike T Posted April 14, 2008 Report Share Posted April 14, 2008 Hmmmmmm..... The TD2 did sell out awfully early this year.... hmmmmmmm..... Quote Link to comment Share on other sites More sharing options...
Skully Posted April 15, 2008 Report Share Posted April 15, 2008 I'd sure appreciate Dynamic Stability Control - and cup holder. The REAL question: Will there be a bottle opener built into the Intec version? Quote Link to comment Share on other sites More sharing options...
Gecko Posted April 15, 2008 Report Share Posted April 15, 2008 The REAL question:Will there be a bottle opener built into the Intec version? now that's an important function Quote Link to comment Share on other sites More sharing options...
martyagt4 Posted April 15, 2008 Report Share Posted April 15, 2008 Bottle opener, great idea! I already find it difficult enough to hurl myself to the ground over and over while sober. Maybe a good stout or bock is what I need to get that angulation I need. Quote Link to comment Share on other sites More sharing options...
Dan Posted April 15, 2008 Report Share Posted April 15, 2008 I love the idea of a bottle opener too. A good excuse to keep a board on display in the off-season, rather than stashing them all in the basement. :) Seriously though, how could a Russian website get the scoop on a TD3 faster than U.S. riders who actually, you know, see Fin in person? Gotta write this one off as a rumour, I think. Quote Link to comment Share on other sites More sharing options...
KingCrimson Posted April 15, 2008 Report Share Posted April 15, 2008 If only you were all Telemarkers. Fin's got it covered on the Bishop bindings. Maybe you could Teleboard? http://www.bombertele.com/images/Bomber.avi Quote Link to comment Share on other sites More sharing options...
Pow Posted April 15, 2008 Report Share Posted April 15, 2008 4 buckle and five buckle UPZ... good:biggthump Quote Link to comment Share on other sites More sharing options...
spil Posted April 15, 2008 Report Share Posted April 15, 2008 Renovated model TD3 with the new form of edging- disk and damping disk (there are no photo). I was going to say the writer just mistyped a 3 instead of a 2, but maybe not... ...Or it was just a typo and in Russia, the TD1 is all they have, and he just meant the TD2? Just incase Fin needs ideas for the TD3::p - a place to hold the hex wrench on the binding. - possibly some sort of air/water -tight container for holding small nicknacks such as those "this is hardboot snowboarding" cards to give to curious onlookers, small globs of wax, or gummi (sp?) stones for deburring edges. -Infinetely adjustable cant/lift. Here is my idea for this: the base plate is a hemisphere shape, and the top plate can rotate over it in any direction (in three deminsional space). The only thing I CANT (pun intended) figure out is how to tighten it. Possibly some sort of screw type thing like on catek OS1's where you just dig a divot into the metal. -You can remove the binding with only having to unscrew the four screws on the board. The screws holes would just go through the hemisphere thing. -Custom color options on the e-rings and on all the metal pieces. Like what Catek has, except it doesn't cost any extra:D. Note to Fin: if you use any of these ideas, please send my a free pair. Quote Link to comment Share on other sites More sharing options...
Pow Posted April 16, 2008 Report Share Posted April 16, 2008 dont mess with perfection says steve:nono: Quote Link to comment Share on other sites More sharing options...
Hans Posted April 16, 2008 Author Report Share Posted April 16, 2008 I like the idea to have a fixed front adjustable bail step in, just as the F2 bindings have. Just stepping out of the chairlift, pop in and go instead of the hasle with that front bail of the TD2 sometimes. I noticed that flat riding suits me the best, no matter what the stances are. But I can imagine some variable cant and lift adjustment in the binding is desirable for some people without loosing the simplicity of the TD2 which I like very much. May be it's time that Fin enlighten us with the presentation of the new TD3. It must be there because other sources confirm the TD3. Development is a good thing and Fin never dissapointed us. He always has a new product each season . Fin, just give us a new 'toy' to buy after that nice BTS you gave us. Quote Link to comment Share on other sites More sharing options...
bobdea Posted April 16, 2008 Report Share Posted April 16, 2008 uh-ohhhh inside info leaked! when the td2 was in development I saw it under a racer or two........... who can spill the beans? Quote Link to comment Share on other sites More sharing options...
Hans Posted April 16, 2008 Author Report Share Posted April 16, 2008 uh-ohhhh inside info leaked! when the td2 was in development I saw it under a racer or two........... who can spill the beans? hahahaha,Bob you must that racer. As I remembered a few years ago I got that software from you to hasle with the TD2 in 3D, so don't keep it in disguise. You must know more, you have the secret. Michelle doesn't give me any (just provoking here, but its worthed) Quote Link to comment Share on other sites More sharing options...
bobdea Posted April 16, 2008 Report Share Posted April 16, 2008 hahahaha,Bob you must that racer. As I remembered a few years ago I got that software from you to hasle with the TD2 in 3D, so don't keep it in disguise. You must know more, you have the secret. Michelle doesn't give me any (just provoking here, but its worthed) different bob, you might mean bob jenney I was living in CO at the time when I was trying to buy a board from a kid when I was wondering WTF the bindings on one of the said decks was Quote Link to comment Share on other sites More sharing options...
Hans Posted April 16, 2008 Author Report Share Posted April 16, 2008 different bob, you might mean bob jenney I was living in CO at the time when I was trying to buy a board from a kid when I was wondering WTF the bindings on one of the said decks was ]You're right, it was Bob Jenney at that time. I have to give it another shot :lol: Quote Link to comment Share on other sites More sharing options...
Skully Posted April 16, 2008 Report Share Posted April 16, 2008 now that's an important function Bottle opener, great idea! I already find it difficult enough to hurl myself to the ground over and over while sober. Maybe a good stout or bock is what I need to get that angulation I need. I love the idea of a bottle opener too. A good excuse to keep a board on display in the off-season, rather than stashing them all in the basement. :) Y'all do know that there is already a bottle opener on the TD2 standard bail version right? The toe bail also works as a bottle opener: http://www.bomberonline.com/VBulletin/showpost.php?p=218&postcount=29 That's why I was joking about the Intec version.... Quote Link to comment Share on other sites More sharing options...
Pow Posted April 16, 2008 Report Share Posted April 16, 2008 The toe bail also works as a bottle opener I can confirm that statement:biggthump Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.