Bobby Buggs Posted November 22, 2015 Report Share Posted November 22, 2015 (edited) What is the part # or specs for the Phillips mounting screws for the f2s Edited November 22, 2015 by Bobby Buggs Quote Link to comment Share on other sites More sharing options...
Pat Donnelly Posted November 22, 2015 Report Share Posted November 22, 2015 Hey Buggs, Checking yyz . . . http://www.yyzcanuck.com/store/F2-Plate-Screws-M6x22mm.html Quote Link to comment Share on other sites More sharing options...
Bobby Buggs Posted November 22, 2015 Author Report Share Posted November 22, 2015 (edited) Thanks Pat, those are for the Toe and Heel blocks, Im looking for the 4x disc screws. I believe these might work, #3 Phillips Drive, M6-1 Thread Size, 12 mm Length, Fully Threaded Anyone agree or not Edited November 22, 2015 by Bobby Buggs Quote Link to comment Share on other sites More sharing options...
philw Posted November 22, 2015 Report Share Posted November 22, 2015 I'm not sure, I'd have to take mine out to measure them. How about this, which suggests they're M6. http://www.carversparadise.com/insert-screws-m6x75-p-1233.html That also says 7.5mm long, but it depends what you're bolting them through - the older F2 titanium plates were a mm thicker than the newer ones are. I ordered replacement screws which are now in my board from there, so they are probably correct. Otherwise, someone needs to take a binding off (hard for me to do right now). Quote Link to comment Share on other sites More sharing options...
3d pro Posted November 22, 2015 Report Share Posted November 22, 2015 I don't know if it's phillips #3 but they are for sure M6 X 7.5 mm full threaded. I pulled mine from my bindding to measure and confirmed. http://www.yyzcanuck.com/store/F2-Insert-Mounting-Screws.html Jeff Quote Link to comment Share on other sites More sharing options...
Corey Posted November 22, 2015 Report Share Posted November 22, 2015 The F2 screws are all Pozidriv. That's why there's a faint X stamped across the head of the + shaped screw. If you use a PZ3 screwdriver they're really strip-resistant. YYZ sells this fancy screwdriver specifically for that: http://www.yyzcanuck.com/store/Wiha-PoziDriv-3-Screwdriver.html I use one from a multi-bit security set from Harbor Freight. But you can use whatever head you want, and a #3 Phillips is more common on this continent. https://en.m.wikipedia.org/wiki/List_of_screw_drives Quote Link to comment Share on other sites More sharing options...
Mr.E Posted November 22, 2015 Report Share Posted November 22, 2015 Get a Pozidrive for the other screws on the bindings- makes a huge difference to not rounding them out (particularly the toe and heel adjusters). These are longer (so check your insert depth), but may work for you: http://www.mcmaster.com/#92467a420/=zx6ai2 Quote Link to comment Share on other sites More sharing options...
Bobby Buggs Posted November 22, 2015 Author Report Share Posted November 22, 2015 Were talking mm's here, I don't think 5-7mm extra length will be an issue. 5-7mm shorter could be a problem with having enough thread engagement Quote Link to comment Share on other sites More sharing options...
teach Posted November 22, 2015 Report Share Posted November 22, 2015 1mm = 1 thread. You want wide heads or maybe washers with a longer screw. Donek carries them now, just get the originals: http://www.donek.com/product/f2-mounting-screws/ Quote Link to comment Share on other sites More sharing options...
pokkis Posted November 22, 2015 Report Share Posted November 22, 2015 I'm using hex-slot 8mm with washers and 6mm without Quote Link to comment Share on other sites More sharing options...
Donek Posted November 22, 2015 Report Share Posted November 22, 2015 http://www.donek.com/product/f2-mounting-screws/ Quote Link to comment Share on other sites More sharing options...
Bobby Buggs Posted November 22, 2015 Author Report Share Posted November 22, 2015 Thank you Sean Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.