Bobby Buggs Posted January 9, 2009 Report Share Posted January 9, 2009 This is the widest board I have ever had:eek: Just wondering where you have your angles Quote Link to comment Share on other sites More sharing options...
fishrising Posted January 9, 2009 Report Share Posted January 9, 2009 Mr. Evil, I'll check my Donek Oppenheim FC 179cm x 21cm x 11.2m and my Rad-Air Tanker Over Size 187cm x 25.8cm x 9m . But a lot my depend your boot size. I riding 31.5s, so my numbers may be way different than yours. Quote Link to comment Share on other sites More sharing options...
James Ong Posted January 9, 2009 Report Share Posted January 9, 2009 Fwiw on my 23 cm wide board i'm running 55/50 size 27 boots Quote Link to comment Share on other sites More sharing options...
Bobby Buggs Posted January 9, 2009 Author Report Share Posted January 9, 2009 Mr. Evil, I'll check my Donek Oppenheim FC 179cm x 21cm x 11.2m and my Rad-Air Tanker Over Size 187cm x 25.8cm x 9m . But a lot my depend your boot size. I riding 31.5s, so my numbers may be way different than yours. Thanks Ben, yeah I dont have Monster Feet:D Im going to run at 57x52 to start Quote Link to comment Share on other sites More sharing options...
Bobby Buggs Posted January 9, 2009 Author Report Share Posted January 9, 2009 Shot with my Blackberry Curve, sorry for the low res Quote Link to comment Share on other sites More sharing options...
Mike Tokar Posted January 9, 2009 Report Share Posted January 9, 2009 on a 21.5 wide Coiler AM 177, size 10.5 feet. Quote Link to comment Share on other sites More sharing options...
Loc Posted January 9, 2009 Report Share Posted January 9, 2009 I ride on a Prior ATV 171 with 55f/50r on my MP24. It's waist is 23.5cm I think. Quote Link to comment Share on other sites More sharing options...
Bullwings Posted January 10, 2009 Report Share Posted January 10, 2009 I ride on a Prior ATV 171 with 55f/50r on my MP24. It's waist is 23.5cm I think. Wow, i have MP 28.5 feet and i ran those angles (55/52) on my 161 ATV. and yes, it is a 23.5 cm waist. When i had a 4wd - 21.5 waist, i was running 60/57. that board was awesome. too bad i was an idiot and stuffed the nose into a mogul and broke it in half. Quote Link to comment Share on other sites More sharing options...
mnovak Posted January 10, 2009 Report Share Posted January 10, 2009 52/45 on prior 4wd with 21.4 waist. Just fits with 26.5Mondo boots. Quote Link to comment Share on other sites More sharing options...
Thor VonRippington Posted January 10, 2009 Report Share Posted January 10, 2009 Riding a couple different 21 wides at 60/57 with a 28 mondo but thats "relaxed" compared to the others Quote Link to comment Share on other sites More sharing options...
KingCrimson Posted January 10, 2009 Report Share Posted January 10, 2009 I ride on a Prior ATV 171 with 55f/50r on my MP24. It's waist is 23.5cm I think. Blessed with carving feet.. How far are your toes and heels from the edges? Quote Link to comment Share on other sites More sharing options...
NateW Posted January 10, 2009 Report Share Posted January 10, 2009 50/55 with size-27 Raichles Quote Link to comment Share on other sites More sharing options...
Loc Posted January 10, 2009 Report Share Posted January 10, 2009 Blessed with carving feet.. How far are your toes and heels from the edges? I just checked it out and it's about 2cm from the edges. I can go down to 30* angles but I've been incrementing my angles gradually so I can eventually ride skinnier boards like the Madd. Quote Link to comment Share on other sites More sharing options...
Steph Posted January 10, 2009 Report Share Posted January 10, 2009 Hey Bob my Coiler AM is 21.5 and I ride 52f/47r. On the wider board I need to have my weight distributed more towards the edges, so lower angles work better for me. Quote Link to comment Share on other sites More sharing options...
Fleaman Posted January 10, 2009 Report Share Posted January 10, 2009 I have a 21 and a 23 wide board with 30mp boots. I have 65 and 58 on the 21 i ride 60 and 48 on the 23 Quote Link to comment Share on other sites More sharing options...
KingCrimson Posted January 10, 2009 Report Share Posted January 10, 2009 I just checked it out and it's about 2cm from the edges. I can go down to 30* angles but I've been incrementing my angles gradually so I can eventually ride skinnier boards like the Madd. That makes sense, I was curious, mainly for the reason Steph mentioned. Quote Link to comment Share on other sites More sharing options...
BadBrad Posted January 10, 2009 Report Share Posted January 10, 2009 52/45 on prior 4wd with 21.4 waist. Just fits with 26.5Mondo boots. On my 4WD and with 26.5 boots I am at 54/51. Quote Link to comment Share on other sites More sharing options...
b0ardski Posted January 10, 2009 Report Share Posted January 10, 2009 I ride the 165 Nidecker Escape at 35r/47f. however the back foot will bootout if I lay out ec carves. great for all around bumps, trees, & offpiste. This is with low profile Nitro plates right to the edge. Quote Link to comment Share on other sites More sharing options...
markp Posted January 12, 2009 Report Share Posted January 12, 2009 It's 21.5; size 10 boots; I run twin 45's! Quote Link to comment Share on other sites More sharing options...
D-Sub Posted January 12, 2009 Report Share Posted January 12, 2009 I don't understand the question...every single board I've ever had I set my boots right at hee;/toe ie to the edes. narrow board higher angles, wide board lower angles, but toes and heels at the edges, or slightly under. Is the intent here to keep the same angles from board to board? That seems counterintuitive to me. oh, and just so Im actually answering...my 23cm prior has me at 47/50 with a mondo 27 Quote Link to comment Share on other sites More sharing options...
Jack M Posted January 12, 2009 Report Share Posted January 12, 2009 Basically what D-Sub said. My board is 21cm wide, and I just put toes and heels on the edges with no overhang looking down from above. These are the lowest angles I've ridden since my last 21cm board (13 years ago ), and I'm loving it. Feels like a snowboard again! I like the extra ankle leverage while carving - it's more stable and balanced. And while not carving it's a lot more natural and fun. There's a reason racers went to wider boards. Quote Link to comment Share on other sites More sharing options...
D-Sub Posted January 12, 2009 Report Share Posted January 12, 2009 Basically what D-Sub said. My board is 21cm wide, and I just put toes and heels on the edges with no overhang looking down from above. These are the lowest angles I've ridden since my last 21cm board, and I'm loving it. Feels like a snowboard again! I like the extra ankle leverage while carving - it's more stable and balanced. And while not carving it's a lot more natural and fun. There's a reason racers went to wider boards. My prior is 19.5...Id like to try a 20 or 21cm waisted carver. The all mountain I have is 23.5 and I can still edge to edge it pretty fast. I like that board. Just seems logical to set the angles toes on the toe edge and heels on the heel edge. I know Sutherland rides the same angles no matter which board and I always thought it was weird, but you sure can't question his skills. Quote Link to comment Share on other sites More sharing options...
Neil Gendzwill Posted January 12, 2009 Report Share Posted January 12, 2009 45 f, 40 r with mondo 27.5 Raichles on my 21.5 waisted AM. There's no issue with drag, and it's a super-functional stance for me for all-mountain riding. . Quote Link to comment Share on other sites More sharing options...
Jack M Posted January 12, 2009 Report Share Posted January 12, 2009 45 f, 40 r with mondo 27.5 Raichles on my 21.5 waisted AM. There's no issue with drag, BS flag thrown! ;) I have 28.0 boots and a 21cm board. I have to be at ~58 to eliminate overhang when viewed from above. Are you saying you have overhang but it doesn't cause an issue? Cuz I can't imagine you don't have overhang. Quote Link to comment Share on other sites More sharing options...
Neil Gendzwill Posted January 12, 2009 Report Share Posted January 12, 2009 I can set the boots in the bindings and roll the whole setup over 90 degrees on carpet, no problem. I don't recall if you can see overhang from above, looking at that picture maybe you do but by the time you get the binding risers and the shape of the toe and heel working together it works fine from a practical standpoint. Maybe there might be some issue on soft snow doing EC stuff, I don't know. No grief for the sort of riding I do. That pictures from when I got together with Gtanner and Fleaman at Sunshine, we all were rocking the AMs that weekend. They run steeper angles than me, IIRC Gord said he just kept the same angles from his narrower boards. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.