piusthedrcarve

I might have the cants (not sure it's 3s, 6s, or mixed) but need to look through stuff. I'll let you know tonight.

Thanks for all who showed interest. Still few are available. PRIOR Custome GS 184 BOMBER TD2 Regular Conversion Kit Outdoor Research Mod Pro Gloves XL

Very windy day it was. Gust up to 35mph. Snow condition was good. Very crowded even though they got 0" of new snow. SnowPark was firmed and few icy spots. LimeLight was bumpy but easily manageable. Farside was also very good but became little icy on few spots around 1.

I and Se7en will going up to Whitetail on 12/27 from 9 to 2:30 pm.

I just put Prior Custom GS 184 on For Sale forum. Check it out. http://www.bomberonline.com/vbulletin/showpost.php?p=326624&postcount=1

Email sent with payment instruction.

Yes. If you have a Burton deck, you need 3 hole disks. Since I'm including both 3D & 4x4 hole pattern disks, you can use the binding on 3 holes pattern or 4x4 hole pattern decks.

The Burton Race Bindings are not spoken for yet.

Status Update: BURTON Cant/Wedge: Hungry Boarder took the 3.5 degree one for just shipping cost by promising exchange with his future olympic bronze medal.:lol: 7 degree one is still for sale. CATEK OS2 Step-In: SOLD VIST Plates: SOLD TD2 2nd Board Kit - Sale pending. Waiting Dan to contact me. TD1 Regular Bindings - Sale pending. Waiting 1st dipper for payment.

The 3.5 degree cant disk has been spoken. Pending Sale. So only selling 7 degree cant/wedge for $20 + shipping.

Thanks Bryan, Totally forgot about the envelope option! Of course I will do that for Dan. PM me for payment instruction.

They are flat and in good condition. If I use USPS Priority, it will be $10 with tracking number.

VIST Plates Outdoor Research Mod Pro Gloves

BOMBER TD2 Regular Setup Kit BURTON Race Bindings BURTON Cants/Wedges

CATEK OS2 Step-In Bindings BOMBER TD1 Regular Bindings - 0 degree cant & matching bumpers is not included. BOMBER TD2 Second Board Kit

More Photos

I'm clearing my gears and here they are. PRIOR Custom GS 184 Length: 184 cm Nose Width: 22.5 cm Tail Width: 22.5 cm Waist: 18.0 cm As shown on following photos, this board has been built for Ian Hadgkiss, Canadian WC Racer, 175 lbs, liked to ride on softer flex GS deck (Chris Prior confirmed it). Must been ridden only few times. The condition is very good. Base is fully covered with storage wax. For sake of fun, I put a Canadian National Flag with marijuana sticker instead of the maple leaf (Removable). For more information on Ian Hadgkiss, here is the link. http://www.bomberonline.com/vbulletin/showpost.php?p=108703&postcount=1. Asking $280+shipping. CATEK OS2 Step-In Bindings In good condition. With standard elastomers. 2 extra bails. SOLD. BOMBER TD1 Regular Bindings TD1 Regular setup with 3 degree cant disk and 6 degree cant disk with matching purple bumpers. + Step-In setup for one foot SOLD. BOMBER TD2 Second Board Kit (2) TD2 cant disks (3 degree) with (2 )Yellow elastomers. SOLD. BOMBER TD2 Regular Setup (2) TD2 Regular bail blocks with bails and (2) heel blocks with bails. $75+shipping. BURTON Race Plate Bindings Almost new condition. Includes 3D and 4x4 hole center disks. SOLD BURTON Cants 1 circular wedge measure 8-1/4" diameter {1" height - 7 degree} of fixed cants under your bindings. Photo showing 2 cants/wedges but only 7 degree cant is for sale. SOLD. VIST Plates Both sides are shaved few millimeters to fit on my 19 cm width deck. Good conditions. SOLD OUTDOOR RESEARCH Mod Pro Gloves XL Brand New. Probably warmest and most durable gloves you will ever find. Detail info is at: http://www.sexyweapon.com/Outdoor_Research_Pro_Mod_Gloves_with_Liner_72189_p/or%2072189-001.htm. $90 + shipping. PM me for payment instruction. I will send out my PayPal account through PM. Thanks.

I too got back to alpine snowboarding after 7 years of break few years ago. It only took 2nd trip to hills to grasp where I left. You will be fine after few runs. Welcome back.

What if one of nicest board builders offers payment plan, like car payment?

$$$ and Idiocy I guess first is $$$. Being a very avid golfer, I see people are starting the sport by acquiring general equipment from mass chain stores like Kmart, Dick's, or Sports Authorities for less than half of what they should spend for clubs. Secondly, Idiocy (uneducated thinking). I do recommend that beginner should get 'Game Improvement' set with newer technology in brand name. THEN, most importantly, get FITTED by professional (Preferred PGA pro, not salesmen from Dick's). Now checking basic determining factors of choosing right equipment such as swing speed, flex, launch angles, ball speed, or club face angle are widely available at less than $200. Then people excuse themselves by saying that they will do that once their swing gets proper shapes or they become good enough to get customized. WRONG. By getting right stuff from the beginning, one can achieve that moment way earlier and excels. I'v done that for golf equipment (pretty much every few years again and again). For alpine snowboard, I'm testing out new shape and newer construction to nail down what I really want. (still in processing). But once I figure out what I want, my credit card will be charged at one of board builders in North America.

I too had a chance to ride metal and new shaped (decambered, hammerhead nose) on Friday at Whitetail. Although it was my 1st run for this season, I could lay down about 80% what I left. New shaped throw me into J-turn if I pushed it hard. It is faster and board just lead me to go fast and fast. I had to embrace myself to slow it down time to time and tried hard to maneuver it when it try to go straight. After riding it for 2 hours, I switched to a freecarve deck and I could rip it from the start. It was easy and predictable turns gave me confidence to go fast also. While I was riding the freecarve deck, I was thinking Snowman's avatar, "I Love Camber' I will try some more times to get used to new metal & new shaped. Since it was very well groomed condition, I may not see the big advantages of new deck that much. Any tip?

I do have step-in conversion kit (with bail blocks) for Catek. I got these to convert my buckle type OS2 but decided to stick with buckle type. And Intec heels & cables. PM me if you are interested.

AFAIK, Purple = Soft Yellow = Medium Red = Hard

Wow, I'll take it. PM sent.

I do have a extra TD1 cant with new 0 degree purple bumpers. PM me.