Jump to content

H2O

Member
 View Profile  See their activity

  • Posts

    136

  • Joined

  • Last visited

 Content Type 

Everything posted by H2O

  1. H2O
    I like it! Once I used an old Burton model (may be Freeride), similar and after I put a third strap on Burton C60 bindings but only on the front binding. Now I ride only with hardboots.
  2. H2O
    I agree, I replaced the original UPZ liners with Palau OVP Soft. Another story!
  3. H2O
    1) Try to set a bigger angle on front binding (close to 25°); when I rode in softboots my setting was 3°/9° (rear) and 27° front. 2) May be you doesn't rotate your torso/hips; rotation is important! 3) Add a bit of set-back to your stance.
  4. H2O
    I agree.This way may be for me a really multiporpose and comfortable way to ride. I'd like to know how ride the bx boards over mentioned.
  5. H2O
    Have you ever carved (with hard boot) on wide bx boards like Donek Saber, Coiler or SG Force? I am thinking to buy one of these to ride with softened hard boots and flat angles like 30/40.
  6. H2O
    I use the Track 700 too and I've removed the top strap because I think it is not necessary. You can also switch it with a booster strap.
  7. H2O
    It is suggested in the article: Canting and Lift By Jack Michaud I tried this setting in the past with several boards but for me wasn't a good idea. I prefer to ride flat.
  8. H2O
    I am searching a skateboard to fun and train in carving during summer and also everyday in the city. Please does anyone know the Carver Skateboards as compared to other skates like Carveboard, Surfstick, Flowboard, Freebord and standard longboards the Carver seems more usable, also on flat slopes. Thanks.
  9. H2O
    I agree!
  10. H2O
    Hi agree with jeff33. Also my post wasn't negative!
  11. H2O
    Hi agree!Excarving, nice vids; yes, ec is possible no bending but push-pull is too important to ride on steep slopes or in moguls. On flat slopes all is possible, even no bending. In Italy or Swiss (also in Zinal) or France not always the slopes (the snow) are in good conditions like in Corea so without push-pull ec is not possible. Of course, rotation is a fundamental!
  12. H2O
    Nooooooo, pepperoni pizza is not an original pizza!When you come to Italy, I will invite you to eat a real one. Then you will not eat pepperoni pizza anymore! See you guys soon.
  13. H2O
    Yesssssss !!!
  14. H2O
    Palau OVP soft.
  15. H2O
    Mmmmmhhhh.....carving is carving.....than, also for me rotation+push/pull are the best way of riding....
  16. H2O
    This is not rotation!!!
  17. H2O
    Pogo swallowtail Shaman 193. I use only hard boots (DeeLuxe 700 or UPZ rc8) softened and with a spring system or AT boots super light as La Sportiva Sideral. For narrow places I ride a Jones Hovercraft 160.
  18. H2O
    I agree !!!!
  19. H2O
    I always ride in hard boots, also soft boot boards like Jones Hovercraft (with light AT boots for free riding) or F2 eliminator and Swoard Dual everywhere (also for carving). I like to ride with a flat bindings set up and angles similar to 30/40 or 15/30 on 26 waist boards. Once I rode with a pureboarding setup on PB boards or soft boot boards. Stop to narrow boards ! ;-)
  20. H2O
    Vsr 170 - 22 cm waist .... super!
  21. H2O
    Jorg rides with DeeLuxe; Free 69 on front and an old Suzuka (in walk mode) on back. I prefer the same boots (front and back) with same calf canting and a symmetric setup with flat bindings
  22. H2O
    Probably Nils means during a strong rotational movement with bindings mounted flat (no cant/lift) typical of Extremecarving technique. https://picasaweb.google.com/104036064935851516152/ExtremeCarvingSession2011?authkey=Gv1sRgCPTnjcHi1-HOxQE#slideshow/5579874278595271362
  23. H2O
    I haven't seen but may be.
  24. H2O
    Other photos .........
  25. H2O
    Finally the new F2 binding Race Titanium CNC. Very well made and a bit heavier than the standard model.
×
×
  • Create New...