Jump to content
tiptoptune2

Added items and lower prices -6 boards race unique run of mill and plate bindings.

Recommended Posts

I pretty certain this stuff qualifies for this "Vintage" area 🙂.   Located in Summit County CO. will ship.  reply or text 970-485-9016  for pics or more info.  Trade on a 16' river tripper canoe with 2-3 inches rocker. Thanks Ken 970-485-9016

Boards:

Riot Velocity carve race snowboard, 180cm, 9m sidecut, very good condition, no base, edge or insert damage, couple very  small chips in top sheet.  Made by maker of Riot Kayaks years back, has carbon in it, solid ride with great hold, great on groomers or chopped up crud.  $130 shipped in US

Sims Burner race carve snowboard 162cm, very good condition, no base, edge or insert damage, few chips in top sheet $130 shipped in US

Nidecker Escape 159cm, very good condition, hardly ridden, $130 shipped in US

Sims 165 cm swallow tail snowboard, old school 5 hole pattern board, professionally added brass inserts for 3 and 4 hole mounting, home cut vee with edges sealed in epoxy. Rides good on groomers and powder and you will not see another one like this.  $65 shipped in US

Burton Fusion 165cm, 24.5cm waist, twin tip, good condition, no damage to base or edges, small nicks in top sheet. $65 shipped in US

Burton Coil 165 - pretty used up, wall hanger or rock board.  Free, not up for shipping this one.  Sorry.

Bindings:

Burton race plate bindings for hardboots carving racing. Metal base, have 3 sets of these. Your choice 3 or 4 hole discs, $65 ea.  shipped in US.

Burton Race plate bindings for hardboots carving race, metal base, this set is newest later design, have one set of these. Your choice 3 or 4 hole discs, $85 shipped

Burton vari cant, adjustable cant, metal center piece with plastic discs that you rotate differently indexing to adjust degree.  Edges of plastic chipped a bit, but still useable. I would not recommend these for an aggressive rider over 150# due to the center metal part will get loose.  It is tight now. May work for larger rider if not real aggressive. $20 shipped in US.

Boots:

Raichle 124 or 724 don't know what the digit is for sure.  They are 3 buckle with the 5 position adjuster on the rear of cuff. 269 mm sole, moldable liners 24 mono 6 us mens, lower shell is a 24 - 24.5.  Fit wife that wears 6.5 - 7 shoe. Some scuffs but fully functional.  $70 shipped in US.

Raichle hardboot snowboard liners size 27/9 mens, moldable, $30 shipped in US.

 

 

 

 

 

IMG_3930.JPG

IMG_3932.JPG

IMG_3934.JPG

IMG_3936.JPG

IMG_3939.JPG

IMG_3945.JPG

IMG_6645.JPG

Edited by tiptoptune2
added and sold items and lower prices

Share this post


Link to post
Share on other sites

I'm interested in the Nidecker if BlueB changes his mind, and would like to know a bit more about the Riot Velocity. PM sent!

Share this post


Link to post
Share on other sites

Added items and update on availability and prices.  Posted here first, listing in ebay now too. feel free to make offer.  i want to get rid of this stuff.

Nidecker, Escape prototype gray board, Burotn Coil and the group of 3 Cants no longer available.

Prices ;

Bindings

Burotn race plates, have 2 sets (except the red top newer  ones that have "Race" on them)   with your choice 3 or 4 hole discs $75 shipped in the US.

Red Burton plates have one set $100 shipped in US your choice 3 or 4 hole

F2 Intec binders on the Riot board with assortment of shims (risers, cants, heel lifts) $135 shipped in US.

 

Cant - Burton Varicant $20 shipped in us.  metal base that pivots and two plastic discs that can be rotated to create varying degree  of cant/lift. has small chips on edge of one of the pieces but still solid and functional.

Boards

Nidecker Escape 159. bought new and proposed to wifey with it.  She agreed to selling it. very good condition 9 of 10 great all mountain board for smaller person $145 shipped. Shipping is approx $45 for a board UPS paying direct at their site, more going through retail location.

Burton Fusion 165 $70 shipped in US. base very good, no edge damage but has very very slight rust that is more a discoloration and not etched in to edge.sidewall construction. top sheep has some marks, inserts good.

Riot Velocity 180, 9m sidecut. 9 of 10. might have a small nick or two on top sheet. base and edges very good, has storage wax on it. bought new direct from Riot. $145 shipped in US
Simms Burner 162 8- of 10 has some chips on top sheet, base and edges very good, inserts good, has storage wax on it. $145 shipped in US

Simms Swallow tail $70 shipped in US. Old school 5 hole converted to 3 and 4 hole with brass inserts, home cut vee sealed with epoxy, base edges inserts all good condition. you will get a lot of looks tearing it up with this one.  It is a worthy ride yet on groomers and powder.   approximately 170 cm.

Boots

Raichle 124 or 724 don't know what the digit is for sure.  they are 3 buckle with the 5 position adjuster on the rear of cuff. 269 mm moldable liners 24 mono 6 us mens, lower shell is a 24 - 24.5.  Fit wife that wears 6.5 - 7 shoe. some scuffs but fully functional.  $50 plus shipping.

reply to site and or text for pictures more info or just send money!  thanks, Ken 970-485-9016

  • Thanks 1

Share this post


Link to post
Share on other sites

Update on what is left and lower prices.

Boards:

Riot Velocity carve race snowboard, 180cm, 9m sidecut, very good condition, no base, edge or insert damage, couple very  small chips in top sheet.  Made by maker of Riot Kayaks years back, has carbon in it, solid ride with great hold, great on groomers or chopped up crud.  $130 shipped in US

Sims Burner race carve snowboard 162cm, very good condition, no base, edge or insert damage, few chips in top sheet $130 shipped in US

Nidecker Escape, 159 cm, hardly used, very good condition, great all mountain type board. $130 shipped.

Sims 165 cm swallow tail snowboard, old school 5 hole pattern board, professionally added brass inserts for 3 and 4 hole mounting, home cut vee with edges sealed in epoxy. Rides good on groomers and powder and you will not see another one like this.  $65 shipped in US

Burton Fusion 165cm, 24.5cm waist, twin tip, good condition, no damage to base or edges, small nicks in top sheet. $65 shipped in US

Bindings:

Burton race plate bindings for hardboots carving racing. Metal base, have 3 sets of these. Your choice 3 or 4 hole discs, $65 shipped in US.

Burton Race plate bindings for hardboots carving race, metal base, this set is newest later design, have one set of these. Your choice 3 or 4 hole discs, $85 shipped

Burton vari cant, adjustable cant, metal center piece with plastic discs that you rotate differently indexing to adjust degree.  Edges of plastic chipped a bit, but still useable. I would not recommend these for an aggressive rider over 150# due to the center metal part will get loose.  It is tight now. May work for larger rider if not real aggressive. $20 shipped in US.

Boots:

Raichle 124 or 724 don't know what the digit is for sure.  They are 3 buckle with the 5 position adjuster on the rear of cuff. 269 mm sole, moldable liners 24 mono 6 us mens, lower shell is a 24 - 24.5.  Fit wife that wears 6.5 - 7 shoe. Some scuffs but fully functional.  $70 shipped in US.

Raichle hardboot snowboard liners size 27/9 mens, moldable, $30 shipped in US.

Reply to site and or text for pictures more info or just send money!  Thanks, Ken 970-485-9016

Edited by tiptoptune2

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.




  • Recently Browsing

    No registered users viewing this page.

×
×
  • Create New...