tiptoptune2

Prior Splitboard 172cm, voile hardware and their hardboot binding, pair of Raichle RR Snowboarder backcountry hardboots size 9.5 ish with vibram sole and forward lean adjuster on cuff, voile skins. Board has one core shot that is filled, otherwise in good condition $300 for all. You can change the binding to soft boot, nothing needed other than a screwdriver to do so. But why would you do that :-0 the voile hardware will fit soft bindings. K2 pontoons for sale too - 190cm have ntn freeride plate mounted on them. $75. 970-485-9016 Colorado will ship. call text for more info pics.

Yep. sold it all locally. Prior Splitboard - decided to sell this too now. 172cm, voile hardware and their hardboot binding, pair of Raichle RR Snowboarder backcountry boots size 9.5 ish with vibram sole and forward lean adjuster on cuff, voile skins. Board has one core shot that is filled, otherwise in good condition $300 for all. You can change the binding to soft boot, nothing needed other than a screwdriver to do so. the voile hardware will fit soft bindings. K2 pontoons for sale too - 190cm have ntn freeride plate mounted on them. $75. 970-485-9016 Colorado will ship.

no longer shredding so time to send it all $300 for all of it. Best to call or text 970-485-9016 for pics info Located Summit County CO. Boards 2 Both 8 or 9 of 10 condition, no base, damage and may not even be a scratch in either base. They both have storage wax on for last year, no edge damage or rust, inserts good. · MADD 170 cm 18 cm wiast, unknown radius, great grip and damp. This thing holds on icy snow very good. Damp too. 9 of 10. Shown in pic with the F2 binders on it. · Riot Velocity carve race snowboard, 180cm, 9m sidecut, very good condition, no base, edge or insert damage, couple very small chip in top sheet. Made by maker of Riot Kayaks years back, has carbon in it, solid ride with great hold, great on groomers or chopped up crud. Bindings 3 · Burton race plate bindings for hardboots carving racing. Metal base not plastic. · Burton Rat Trap step in plate bindings for hardboots carving racing. These may work with ski boots too. Metal base not plastic · F2 Intec Step in plate race bindings with some risers/cants. Don’t think they are titanium, aluminum? · 2 Burton fixed cant plates that binding can be mounted in various positions to cant or raise heel. · Bunch of burton 3 and 4 hole discs. · Screws washers – a gad zillion of them Boots 2 · Raichle 124 or 724 don't know what the digit is for sure. They are 3 buckle with the 5 position adjuster on the rear of cuff. 269 mm sole, moldable liners 24 mono 6 us mens, lower shell is a 24 - 24.5. Fit wife that wears 6.5 - 7 shoe. Some scuffs but fully functional. · Raichle 324 snowboard hard boots. 4 buckle with 5 position adjuster on rear cuff. Shell size 27-27.5, liners 27.5. Has the intec heels on and I have the original heels and screws too.

Update on what is left and lower prices. Boards: Riot Velocity carve race snowboard, 180cm, 9m sidecut, very good condition, no base, edge or insert damage, couple very small chips in top sheet. Made by maker of Riot Kayaks years back, has carbon in it, solid ride with great hold, great on groomers or chopped up crud. $130 shipped in US Sims Burner race carve snowboard 162cm, very good condition, no base, edge or insert damage, few chips in top sheet $130 shipped in US Nidecker Escape, 159 cm, hardly used, very good condition, great all mountain type board. $130 shipped. Sims 165 cm swallow tail snowboard, old school 5 hole pattern board, professionally added brass inserts for 3 and 4 hole mounting, home cut vee with edges sealed in epoxy. Rides good on groomers and powder and you will not see another one like this. $65 shipped in US Burton Fusion 165cm, 24.5cm waist, twin tip, good condition, no damage to base or edges, small nicks in top sheet. $65 shipped in US Bindings: Burton race plate bindings for hardboots carving racing. Metal base, have 3 sets of these. Your choice 3 or 4 hole discs, $65 shipped in US. Burton Race plate bindings for hardboots carving race, metal base, this set is newest later design, have one set of these. Your choice 3 or 4 hole discs, $85 shipped Burton vari cant, adjustable cant, metal center piece with plastic discs that you rotate differently indexing to adjust degree. Edges of plastic chipped a bit, but still useable. I would not recommend these for an aggressive rider over 150# due to the center metal part will get loose. It is tight now. May work for larger rider if not real aggressive. $20 shipped in US. Boots: Raichle 124 or 724 don't know what the digit is for sure. They are 3 buckle with the 5 position adjuster on the rear of cuff. 269 mm sole, moldable liners 24 mono 6 us mens, lower shell is a 24 - 24.5. Fit wife that wears 6.5 - 7 shoe. Some scuffs but fully functional. $70 shipped in US. Raichle hardboot snowboard liners size 27/9 mens, moldable, $30 shipped in US. Reply to site and or text for pictures more info or just send money! Thanks, Ken 970-485-9016

Added items and update on availability and prices. Posted here first, listing in ebay now too. feel free to make offer. i want to get rid of this stuff. Nidecker, Escape prototype gray board, Burotn Coil and the group of 3 Cants no longer available. Prices ; Bindings Burotn race plates, have 2 sets (except the red top newer ones that have "Race" on them) with your choice 3 or 4 hole discs $75 shipped in the US. Red Burton plates have one set $100 shipped in US your choice 3 or 4 hole F2 Intec binders on the Riot board with assortment of shims (risers, cants, heel lifts) $135 shipped in US. Cant - Burton Varicant $20 shipped in us. metal base that pivots and two plastic discs that can be rotated to create varying degree of cant/lift. has small chips on edge of one of the pieces but still solid and functional. Boards Nidecker Escape 159. bought new and proposed to wifey with it. She agreed to selling it. very good condition 9 of 10 great all mountain board for smaller person $145 shipped. Shipping is approx $45 for a board UPS paying direct at their site, more going through retail location. Burton Fusion 165 $70 shipped in US. base very good, no edge damage but has very very slight rust that is more a discoloration and not etched in to edge.sidewall construction. top sheep has some marks, inserts good. Riot Velocity 180, 9m sidecut. 9 of 10. might have a small nick or two on top sheet. base and edges very good, has storage wax on it. bought new direct from Riot. $145 shipped in US Simms Burner 162 8- of 10 has some chips on top sheet, base and edges very good, inserts good, has storage wax on it. $145 shipped in US Simms Swallow tail $70 shipped in US. Old school 5 hole converted to 3 and 4 hole with brass inserts, home cut vee sealed with epoxy, base edges inserts all good condition. you will get a lot of looks tearing it up with this one. It is a worthy ride yet on groomers and powder. approximately 170 cm. Boots Raichle 124 or 724 don't know what the digit is for sure. they are 3 buckle with the 5 position adjuster on the rear of cuff. 269 mm moldable liners 24 mono 6 us mens, lower shell is a 24 - 24.5. Fit wife that wears 6.5 - 7 shoe. some scuffs but fully functional. $50 plus shipping. reply to site and or text for pictures more info or just send money! thanks, Ken 970-485-9016

I pretty certain this stuff qualifies for this "Vintage" area . Located in Summit County CO. will ship. reply or text 970-485-9016 for pics or more info. Trade on a 16' river tripper canoe with 2-3 inches rocker. Thanks Ken 970-485-9016 Boards: Riot Velocity carve race snowboard, 180cm, 9m sidecut, very good condition, no base, edge or insert damage, couple very small chips in top sheet. Made by maker of Riot Kayaks years back, has carbon in it, solid ride with great hold, great on groomers or chopped up crud. $130 shipped in US Sims Burner race carve snowboard 162cm, very good condition, no base, edge or insert damage, few chips in top sheet $130 shipped in US Nidecker Escape 159cm, very good condition, hardly ridden, $130 shipped in US Sims 165 cm swallow tail snowboard, old school 5 hole pattern board, professionally added brass inserts for 3 and 4 hole mounting, home cut vee with edges sealed in epoxy. Rides good on groomers and powder and you will not see another one like this. $65 shipped in US Burton Fusion 165cm, 24.5cm waist, twin tip, good condition, no damage to base or edges, small nicks in top sheet. $65 shipped in US Burton Coil 165 - pretty used up, wall hanger or rock board. Free, not up for shipping this one. Sorry. Bindings: Burton race plate bindings for hardboots carving racing. Metal base, have 3 sets of these. Your choice 3 or 4 hole discs, $65 ea. shipped in US. Burton Race plate bindings for hardboots carving race, metal base, this set is newest later design, have one set of these. Your choice 3 or 4 hole discs, $85 shipped Burton vari cant, adjustable cant, metal center piece with plastic discs that you rotate differently indexing to adjust degree. Edges of plastic chipped a bit, but still useable. I would not recommend these for an aggressive rider over 150# due to the center metal part will get loose. It is tight now. May work for larger rider if not real aggressive. $20 shipped in US. Boots: Raichle 124 or 724 don't know what the digit is for sure. They are 3 buckle with the 5 position adjuster on the rear of cuff. 269 mm sole, moldable liners 24 mono 6 us mens, lower shell is a 24 - 24.5. Fit wife that wears 6.5 - 7 shoe. Some scuffs but fully functional. $70 shipped in US. Raichle hardboot snowboard liners size 27/9 mens, moldable, $30 shipped in US.

weighs 2 pounds 12 ounces, 15 cm at waist and 19 cm at tips. Yes for camber. Measures a tad over 3/8 inch so approx 10mm.

thanks for the help everyone. Conshox rings a bell but not certain. No facebook here, so may go on ebay. Just thought i would give this group a chance. PSR you should give it a try - $25 plus shipping it is yours 970-485-9016

long shot here, but maybe someone on this forum has or knows who does have the board this came off. I got it attached to a 196 F2 board that i bought years back that i was told was Jeff Archibald's board he used in downhill competition back in the day. IIRC the board was yellowish in color. I probably have a picture of the board somewhere.

Not boarding much these days and have no need for this. It is 2 piece, looks to be wood with carbon fiber on bottom, not sure what the top is. Has a couple options/positions to bolt to board and same for bindings. thread holes all goog. 150 cm overall length. Not sure what worth. can i say offer on here? located breckenridge colorado 970-485-9016