chotoboydave Posted April 21, 2006 Report Share Posted April 21, 2006 I have boarded for the last 7 years and now making the switch to hard plate carving, i've tried it a few times, but now going to purchase. i'm 5'6", 165lbs and thought about a F2 158 speedcross Do you think this is a good size? a guy at Donek suggested a 167. I thought that was a little long for someone who is just starting. Let me know what you think................ Quote Link to comment Share on other sites More sharing options...
philfell Posted April 21, 2006 Report Share Posted April 21, 2006 What are your plans for the board? Will it be your only board, or will it be serve more of a specific purpose? What direction do you want to take your riding in the next few season? Quote Link to comment Share on other sites More sharing options...
gdboytyler Posted April 21, 2006 Report Share Posted April 21, 2006 A board in the 160 to 170cm range would probably be a good starting point. 158 is on the short side for carving. I've never ridden a F2 Speedcross, but it sounds like a boardercross board (wide + small sidecut radius). I would bet that a Donek FC would carve better than the Speedcross. And I happen to have a Donek FCII 163 for sale. And because it happens to be the end of the season, I will drop the price to $350 + shipping. Check out this link for pics and more info: http://www.bomberonline.com/VBulletin/showthread.php?t=10421 The Donek FCII will be good for learning how to carve and it will hold it's own as you get better. Quote Link to comment Share on other sites More sharing options...
chotoboydave Posted April 21, 2006 Author Report Share Posted April 21, 2006 Thanks for the feedback, I still have my freestyle board if I ever want to go back. I intend to use this board for a carving board on packed groomed powder. The concern is that I'm just starting and not sure where to start Quote Link to comment Share on other sites More sharing options...
BobD Posted April 21, 2006 Report Share Posted April 21, 2006 how much easier it is to learn on a shorter board at first, especially if you don't have ideal runs and other people to deal with. If you envision buying only one board in the next two seasons go for something in the mid 160s. Otherwise most people I know have found it easier to learn on a shorter board and buy something longer as you gain experience. It also depends on how often you ride. If you only get out ten times a season, you won't outgrow the 158 very quickly. If you ride 40 plus times then maybe go longer. BobD Quote Link to comment Share on other sites More sharing options...
Mike T Posted April 21, 2006 Report Share Posted April 21, 2006 My opinion - and this comes from vivid memories of my carving experience - is that sidecut and stiffness matter much more than length. As far as sidceut goes I think 10.5 - 11.5 is a good place to start, and get something stiff enough so that you won't fold it easily and throw you over the front like happened to me when I started (then-185 pounder on a Donek FC 163 originally)... but soft enough so you can easily bend it. Maybe a used Volkl RT 168 or 173 or a Madd 170, or a Burton UP 168 or a Donek FC 171 from one of the softer vintages (03/04 and 04/05 were very stiff) would be good? Too short, soft, or turny a board won't do you any favors, any more than too long, stiff or non-turny. If it's too short the sweet spot will be microscopic and you'll have a tough time riding aggressivkey, which is key to progression in this sport. Too soft and it'll be unstable, again preventing you from riding aggressively which will stunt your growth as a carver. Too turny and it'll tire you out. Super-turny is really good if you ride at a low-vertical resort of course. I still find super-short boards hard to ride, after 120+ days on plates and 350+ days total riding. I find mid-length, mid-sidecut boards the easiest... Donek FC 175 w/ 11.75 m sidecut is the easist yet for me. Quote Link to comment Share on other sites More sharing options...
Pow Posted April 21, 2006 Report Share Posted April 21, 2006 length of board vs your size isnt as important with a carving board. if youre 120 pounds riding a 170 and skidding/ ploughing, youre ganna get really tired really fast. however, carving causes much less friction and a longer board isnt too much more fatiguing to carve. The main difference in size is stability vs sharper turning. a short board can turn much sharper than a longer board, while a longer board is more stable at high speed. but for a beginner, a long board is cumbersome and difficult to manuver, so id definately go with the 158. and if youve got crowds and narrow runs, short boards are usefull too. its nice to see youre growing a quiver, because due to differences in runs, crowds, conditions, and riding styles, it really is impossible to get one board to do it all (although the pogo longboard is pretty close!) Quote Link to comment Share on other sites More sharing options...
chotoboydave Posted April 21, 2006 Author Report Share Posted April 21, 2006 great comments, I'm going on my 3rd year with a season pass at Heavenly, thus haven't boarded on other resorts, trying to milk all that I can out of the season pass. Heavenly gets crowded and doesn't have a lot of open bowls, somewhat narrow runs and always dodging kooks. thanks for the feedback, i have a pretty good idea of what to purchase. peace out Quote Link to comment Share on other sites More sharing options...
bobdea Posted April 22, 2006 Report Share Posted April 22, 2006 and generally has decent snow so I would say aim for something with a 11ish SCR boards with a small scr are tiring and don't carve too well if at all at higher speeds that said if you plan on moving to ontario and ride somthing with a 500 ft vert a super turny ride would be THE tool another thing is turny decks can really send you for a ride (think cartwheels) in soft snow both things have been said already but thats my 2 cents anyway Quote Link to comment Share on other sites More sharing options...
skatha Posted April 22, 2006 Report Share Posted April 22, 2006 great comments, I'm going on my 3rd year with a season pass at Heavenly, thus haven't boarded on other resorts, trying to milk all that I can out of the season pass. Heavenly gets crowded and doesn't have a lot of open bowls, somewhat narrow runs and always dodging kooks. thanks for the feedback, i have a pretty good idea of what to purchase. peace out Hey, I'll be there in January.... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.