ThePeonsChamp Posted November 3, 2017 Report Share Posted November 3, 2017 (edited) Hello all, I was wondering if the regular TD3 binding plate will work with the boiler plate lower cant disk or if you need the thin disk for it to work? Also if anyone has some bp lower cant disks that they would be willing to let me use/buy until I can get the ones I ordered from bomber to actually come that would be awesome. I am in desperate need of some lowers before the season starts. Edited November 3, 2017 by ThePeonsChamp Quote Link to comment Share on other sites More sharing options...
drschwartz Posted November 3, 2017 Report Share Posted November 3, 2017 You can pretty much mix and match any TD2 and TD3 uppers, lowers and cants on any plate or standard 4 hole board. You just need to make sure you use the correct length 5mm bolts so that you get purchase, but don't bottom out on the plate or ruin the base of your board. The bolts come in 3 standard lengths. The main problem with standard TD bindings and cant discs on top of a boilerplate is height. The shorter cant discs don't put you up so high in the air and give you a better feel for the board. Some folks like running a fully flat binding plate on top of a boilerplate or other isolation plate because of the height of TD bindings. Doc Quote Link to comment Share on other sites More sharing options...
ThePeonsChamp Posted November 3, 2017 Author Report Share Posted November 3, 2017 Ok thanks for the response Dr. @drschwartz So you can confirm that the regular sized pucks will work for the Boiler plate version of the TD3 cant disks? I am trying to see if the regular sized TD3 pucks will work with the BP lower cant disks. Also if I do need the thin pucks for the BP cant disks and I cant get a hold of a pair how would i go about adapting my Td3 SI to being attached flat onto the BP? Quote Link to comment Share on other sites More sharing options...
Jack M Posted November 3, 2017 Report Share Posted November 3, 2017 No, you need the thin disks because the BP e-rings are also thinner. Quote Link to comment Share on other sites More sharing options...
ThePeonsChamp Posted November 3, 2017 Author Report Share Posted November 3, 2017 Shoot that's what I was afraid of. I contacted the YYZ guys and they didn't have any of the lowered cants. Then I contacted Shaun of donek and he had 1 pair of 3/3 degrees but he said the thin pucks were cracked and he wouldn't sell them to me so unless bomber gets their stuff together I'm kind of screwed unless one of you kind gentlemen has an extra pair that I can purchase or borrow until bomber is back in business. If anyone would be so willing please PM me and you will be generously rewarded, any help would be awesome thanks. Quote Link to comment Share on other sites More sharing options...
Corey Posted November 3, 2017 Report Share Posted November 3, 2017 Look for TD2 center discs and e-rings if you can't find the BP ones. They're not terribly different in height and were much more common. Plus you can use standard TD cant discs. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.