rjnakata Posted January 21, 2016 Report Share Posted January 21, 2016 (edited) [SOLD][SOLD] Madd 170 "Arc Angel" White sidewalls, carbon butterfly topsheet. Plenty of pop and tons of edge hold. A little over 5/8"+ (11/16") of camber, F-2 Flex (two notches in tail) - but seems a little stiffer than that to me with higher camber than normal. Super Condition. There are no chips, no dings, no gouges. No “skier rash” on the tail. There are faint binding marks. The edges are ding free and sharp, 3 degree. The base is nice and has 2-3 light scratches with a recent structure. Base is flat across the board. There was a poorly executed repair when I got it near the tail when I got it. I had that area replaced with 3” diameter circle of ptex and now it is more than solid. It does show traces of white epoxy around the perimeter of the ptex, but the base had its first grind just after the repair so if you run your finger it's totally smooth. That circle shows the kind of carve you'll be making with this blade. $300 Email me at RJNakata (at) aol com Edited September 21, 2016 by rjnakata Quote Link to comment Share on other sites More sharing options...
big canuck Posted January 21, 2016 Report Share Posted January 21, 2016 Love that graphic..... Super sweet board too!!! Quote Link to comment Share on other sites More sharing options...
rjnakata Posted January 26, 2016 Author Report Share Posted January 26, 2016 Love that graphic..... Super sweet board too!!! Thanks, maybe that's not an angel... Quote Link to comment Share on other sites More sharing options...
rjnakata Posted January 30, 2016 Author Report Share Posted January 30, 2016 available until noted in post Quote Link to comment Share on other sites More sharing options...
Bearlong Posted February 1, 2016 Report Share Posted February 1, 2016 Beautiful board! I'm new to hardboot world but wanting to jump in. I'm a big guy. Do you think this board would be well suited for a big fellow? Quote Link to comment Share on other sites More sharing options...
dragonrider Posted February 1, 2016 Report Share Posted February 1, 2016 available until noted in post would you want to trade with 178 SG speed in very good condition.? Quote Link to comment Share on other sites More sharing options...
Jack M Posted February 3, 2016 Report Share Posted February 3, 2016 Beautiful board! I'm new to hardboot world but wanting to jump in. I'm a big guy. Do you think this board would be well suited for a big fellow? Assuming your feet are also big, I would say no, this board has a very narrow waist, 18cm. Quote Link to comment Share on other sites More sharing options...
rjnakata Posted February 3, 2016 Author Report Share Posted February 3, 2016 would you want to trade with 178 SG speed in very good condition.? Thanks for the offer...I'm somewhat open to trades, but I wouldn't need the SG. Quote Link to comment Share on other sites More sharing options...
dragonrider Posted February 4, 2016 Report Share Posted February 4, 2016 Thanks for the offer...I'm somewhat open to trades, but I wouldn't need the SG. I have F2 and a prior race metal? Quote Link to comment Share on other sites More sharing options...
rjnakata Posted February 5, 2016 Author Report Share Posted February 5, 2016 Assuming your feet are also big, I would say no, this board has a very narrow waist, 18cm. I agree with this...His angles would be pretty steep at size a size 12. I told Bearlong as much. Quote Link to comment Share on other sites More sharing options...
cfj04 Posted February 5, 2016 Report Share Posted February 5, 2016 I'm a mondo 29 - size 13 and ride my madd comfortably at 62 / 56 angles Quote Link to comment Share on other sites More sharing options...
rjnakata Posted February 8, 2016 Author Report Share Posted February 8, 2016 I'm a mondo 29 - size 13 and ride my madd comfortably at 62 / 56 angles Thanks for clarifying...I ride a M26.0 and of course the width was not an issue. It's interesting to note that a much larger size can work. Quote Link to comment Share on other sites More sharing options...
big canuck Posted February 8, 2016 Report Share Posted February 8, 2016 I ride/rode 18 cm waists (including 170 Madds) no prob with 28.5 mondo boots/size 12 feet at 65/60 Quote Link to comment Share on other sites More sharing options...
rjnakata Posted February 11, 2016 Author Report Share Posted February 11, 2016 (edited) Madd! Edited February 16, 2016 by rjnakata Quote Link to comment Share on other sites More sharing options...
rjnakata Posted February 16, 2016 Author Report Share Posted February 16, 2016 Love that graphic..... Super sweet board too!!! agreed. sweet! Quote Link to comment Share on other sites More sharing options...
rjnakata Posted February 22, 2016 Author Report Share Posted February 22, 2016 Also open to trades... Quote Link to comment Share on other sites More sharing options...
rjnakata Posted March 10, 2016 Author Report Share Posted March 10, 2016 If you see this - the board is available. Quote Link to comment Share on other sites More sharing options...
megtrimix Posted March 10, 2016 Report Share Posted March 10, 2016 I buy it, give me your pay pal please. Sent from my iPad using Tapatalk Quote Link to comment Share on other sites More sharing options...
rjnakata Posted March 10, 2016 Author Report Share Posted March 10, 2016 I buy it, give me your pay pal please. Sent from my iPad using Tapatalk PM'd you. Quote Link to comment Share on other sites More sharing options...
megtrimix Posted March 11, 2016 Report Share Posted March 11, 2016 Hello, I do apologize for the delay, but I'm been slammed and no much time do look over snowboards.... I really like your board, but I was reading about problems with foot size, I'm mondo 31 size 14 feet and at this point I'm not sure if will be ok for me what do you think? That board looks absolutely gorgeous! Sent from my iPad using Tapatalk Quote Link to comment Share on other sites More sharing options...
rjnakata Posted March 11, 2016 Author Report Share Posted March 11, 2016 (edited) Hello, I do apologize for the delay, but I'm been slammed and no much time do look over snowboards.... I really like your board, but I was reading about problems with foot size, I'm mondo 31 size 14 feet and at this point I'm not sure if will be ok for me what do you think? That board looks absolutely gorgeous! cfj04 in post #11 says M29 work comfortably for him at 62/56. At M31 you'd be looking at higher boot angles than that. I'm not sure what the angles would be for your M31 boots but since they are 2cm longer than M29 higher boot angles (more parallel to the board) are required in order to avoid toe/heel drag. I have a feeling you know more about the origins of that graphic than I do. Can you tell me? RJ rjnakata (at) aol com Edit: from your PJ7.0 on the: "Asym" post it looks as if you already ride pretty high angles... Edited March 11, 2016 by rjnakata Quote Link to comment Share on other sites More sharing options...
megtrimix Posted March 11, 2016 Report Share Posted March 11, 2016 The PJ 7, i never rode it, I got from someone on FB, jute because I was looking for something that was better condition then mine, but wasn't. About the picture looks like a Leonardo Da Vinci draw, but it can be that someone have just use same technique. If you looking inside the paint u can see that there is inside draw that was typical of Leonardo. It's a gorgeous board and design. Generally my angles are 50/45 top! Sent from my iPad using Tapatalk Quote Link to comment Share on other sites More sharing options...
megtrimix Posted March 11, 2016 Report Share Posted March 11, 2016 It's not this one, I have to track down the other... Sent from my iPad using Tapatalk Quote Link to comment Share on other sites More sharing options...
rjnakata Posted March 12, 2016 Author Report Share Posted March 12, 2016 It's a gorgeous board and design. Generally my angles are 50/45 top! With MP31 boots if your angles are not in the 60's this board is probably not for you. I love that graphic too! Quote Link to comment Share on other sites More sharing options...
ar(angel Posted March 12, 2016 Report Share Posted March 12, 2016 I believed I was the original owner of that board. Sold it to RJ after a local shop had jacked up the base when waxing it. Board was originally ordered with the "Angel" graphic from Madd during one of their Thanksgiving sales. Board was taken from original stock but he had put the wrong tail graphic on it, I can't remember what I had asked for on the tail but it wasn't what I had originally wanted. Board was awesome when I had it so I can vouch for it's performance. Regards, Arcangel Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.