rjnakata Posted November 15, 2010 Report Share Posted November 15, 2010 I'm looking to get some new wheels for my Kebbek Flushcut and Loaded Dervish. I like them because for me, they do a lot to simulate alpine carving. I'd rather not go on Silverfish and get a bunch of less than helpful one-word responses (and get blasted for the Dervish), so I'm asking you guys since this is where I get intelligent info! :D So I'm looking for a wheel I can carve on (like alpine carving). The Orangatang Durian purples I used lost traction suddenly and sent me to the ground. The Otang In Heat orange are better, but still have a bit of traction loss, and the Otang Stimulus yellow are the best, with no traction loss while carving. I haven't tried any others. The only thing is that I'd like a wheel that can do some smooth sliding also. Am I asking too much: confidence inspiring grip for carving with butter smooth sliding capability? I need some of the BOL collective wisdom. Thanks! Quote Link to comment Share on other sites More sharing options...
Gecko Posted November 15, 2010 Report Share Posted November 15, 2010 My initial goal this year was to find a wheel that gave me chatter free sliding....I twice got bucked when my reflex thane wheels hooked up violently at the end of a slideafter trying a bunch of wheels I settled on the 70mm/78a Blue Divine Touch wheels and I was laughing hysterically the first fast run I had that allowed me to drift predictably in every corner. But they might not have enough traction for you, I have heard that Zak Maytum's new Venom Cannibal wheels are smooth sliding and full of traction. The Nersh Money Hax are just full of traction though I haven't heard what the slide is like and of course there's Centrax but I doubt many can slide those at all Quote Link to comment Share on other sites More sharing options...
BlueB Posted November 15, 2010 Report Share Posted November 15, 2010 Give a try to Grippins. Quote Link to comment Share on other sites More sharing options...
rjnakata Posted November 16, 2010 Author Report Share Posted November 16, 2010 My initial goal this year was to find a wheel that gave me chatter free sliding....I twice got bucked when my reflex thane wheels hooked up violently at the end of a slideafter trying a bunch of wheels I settled on the 70mm/78a Blue Divine Touch wheels and I was laughing hysterically the first fast run I had that allowed me to drift predictably in every corner. But they might not have enough traction for you, I have heard that Zak Maytum's new Venom Cannibal wheels are smooth sliding and full of traction. The Nersh Money Hax are just full of traction though I haven't heard what the slide is like and of course there's Centrax but I doubt many can slide those at all Thanks Gecko, I read all 10+ pages of the Silverfish review on the Venom Cannibals. It sounds like the red (80a) or white (78a) might be a good choice. I'm hoping it's not a DH only wheel because I'll probably never get into that, but the purported slide/grip capacity seems appealing for freeriding/carving. Quote Link to comment Share on other sites More sharing options...
rjnakata Posted November 16, 2010 Author Report Share Posted November 16, 2010 Give a try to Grippins. Thanks Boris, is that your wheel of choice, Mr. Guru? Quote Link to comment Share on other sites More sharing options...
pokkis Posted November 16, 2010 Report Share Posted November 16, 2010 Wheels are no problem, but has anyone idea how to mark place of cones in snow Quote Link to comment Share on other sites More sharing options...
BlueB Posted November 16, 2010 Report Share Posted November 16, 2010 Thanks Boris, is that your wheel of choice, Mr. Guru? Thanks, but I'm far from guru in skateboarding. There are a lot of better riders here... On my slalom setups, as much as the grip is ultimate goal, the slide sometimes happenes, or you induce it to make an impossible cone. Grippins constsantly gave me smoother slide and way smoother re-engagemant then, say, ZigZags. Also couple of local downhillers claim the same for their downhill setups. However, they need to be broken-in properly, for sliding. Quote Link to comment Share on other sites More sharing options...
BlueB Posted November 16, 2010 Report Share Posted November 16, 2010 Just stumbled onto these, on Fish: http://www.silverfishlongboarding.com/forum/vbclassified.php?do=ad&id=19106 Quote Link to comment Share on other sites More sharing options...
Gecko Posted November 16, 2010 Report Share Posted November 16, 2010 Just stumbled onto these, on Fish: http://www.silverfishlongboarding.com/forum/vbclassified.php?do=ad&id=19106 word of warning....if he says they are too slippery then they are something that should be used on a slide only deck...he generally likes a very sticky wheel Quote Link to comment Share on other sites More sharing options...
BlueB Posted November 16, 2010 Report Share Posted November 16, 2010 Yeah, I guess the split duro would be better on a carving setup. Grippins I run 84a forward, 78a rear... Quote Link to comment Share on other sites More sharing options...
Arclite Posted November 22, 2010 Report Share Posted November 22, 2010 I love my Otang In Heats 83a. I'd get the 80a ones though if I got a new set. It may seem a bit soft for sliding, but once you break them in... HOLY JESUS. Quote Link to comment Share on other sites More sharing options...
Gecko Posted November 23, 2010 Report Share Posted November 23, 2010 Zak has been pushing his wheels also and dropped off a few protos many months ago. Hopefully he will get them off the ground. If I recall correctly, the Cannibals are sliding wheels based on the Kryto mold and the downhill wheels influenced by Manx are not yet released but I have them. Bola http://www.allboardssports.com the first round of DH wheels influenced by Manx have been and gone, they were......slow (I think they were called shockers). the Venom slide wheels are called Sidewinders and they are centerset and not much like any Krypto I have ever seen the Cannibals have been out for a few months (see pic below) I haven't skated them but a friend who works for Zak is supposed to be in town this weekend so hopefully I'll get to try them. I've heard they stick better than Nersh not as well as Centrax and slide/drift smoother than either. Another really good choice would be Classic thane Zig Zags or Big Zigs traction shape semi drifty thane I would recommend 78a Flashbacks are another choice Quote Link to comment Share on other sites More sharing options...
MozzMann Posted December 1, 2010 Report Share Posted December 1, 2010 Nersh MoneyHax or Centrax get my vote stick like Poo to a blanket yet will still slide when you require. Quote Link to comment Share on other sites More sharing options...
xxguitarist Posted December 1, 2010 Report Share Posted December 1, 2010 I'm minus the experience on the new generation of wheels (say, anything newer than/including o'tangs) but have made my way through a number of the other older wheels. Two most predictable drifting wheels are the old white 80a hotspots & pink powerballs. Hotspots have a good deal more grip, obviously. Quote Link to comment Share on other sites More sharing options...
scrutton Posted December 29, 2010 Report Share Posted December 29, 2010 I'm a total novice but I've been researching this question for the last couple of days. This thread may be helpful. I just ordered a set of flywheels. I hear that for sliding you want a rounded corner wheel rather than a square sided wheel. http://www.silverfishlongboarding.com/forum/longboard-skateboarding-wheels-bearings/146724-abec11-76mm-flywheels-81a-75-mm-durians-83a.html Quote Link to comment Share on other sites More sharing options...
MozzMann Posted December 29, 2010 Report Share Posted December 29, 2010 ABEC11 Flywheels in 90mm are an awesome longboard wheel. available in a variety of hardness's . from 76a through to 98a. Quote Link to comment Share on other sites More sharing options...
Asheville Philip Posted December 30, 2010 Report Share Posted December 30, 2010 I'm looking to get some new wheels for my Kebbek Flushcut and Loaded Dervish. I like them because for me, they do a lot to simulate alpine carving. I'd rather not go on Silverfish and get a bunch of less than helpful one-word responses (and get blasted for the Dervish), so I'm asking you guys since this is where I get intelligent info! :DSo I'm looking for a wheel I can carve on (like alpine carving). The Orangatang Durian purples I used lost traction suddenly and sent me to the ground. The Otang In Heat orange are better, but still have a bit of traction loss, and the Otang Stimulus yellow are the best, with no traction loss while carving. I haven't tried any others. The only thing is that I'd like a wheel that can do some smooth sliding also. Am I asking too much: confidence inspiring grip for carving with butter smooth sliding capability? I need some of the BOL collective wisdom. Thanks! I'm new to this forum and carving snowboards but I've been skating for a few years so maybe I can help. I'm a bit puzzled that you had no traction loss with the yellow stimulus since they are the most slippery wheel that they make. Maybe you were feeling the difference between bigger 75mm wheels and smaller, more nimble 70mm wheels? I like my yellow durians for learning stand-up slides since they break free at a much slower speed but they often leave me on my ass while drifting hairpins. Try some Sector 9 race formulas. So far I have tried zig zags, big zigs, flywheels, grippins, noskools, purple inheats, yellow durians, seismic speedvents, fireball beasts, and s9 raceforms. The raceforms are by far the best all-around wheel I have personally tried. I have red 74mm 82a which are square-lipped offset. You might in fact be asking too much of one wheel. Its nice to have a quiver of boards and an arsenal of wheels! I would personally try a set of 70mm 82a (red round centerset) raceforms on the dervish and a set of 76mm 78a (yellow square centerset) raceforms on the flushcut. I would recommend the 74mm for the flushcut but I'm not sure how low it rides with the double drop so you might get rail drag. Quote Link to comment Share on other sites More sharing options...
rjnakata Posted December 31, 2010 Author Report Share Posted December 31, 2010 Thanks all, That's what BOL is about...knowledgeable, articulate, helpful. I certainly have a better feel for a ton of wheels I have never even heard of (in my little vacuum). Quote Link to comment Share on other sites More sharing options...
rjnakata Posted December 31, 2010 Author Report Share Posted December 31, 2010 I'm a bit puzzled that you had no traction loss with the yellow stimulus since they are the most slippery wheel that they make. Maybe you were feeling the difference between bigger 75mm wheels and smaller, more nimble 70mm wheels? I like my yellow durians for learning stand-up slides since they break free at a much slower speed but they often leave me on my ass while drifting hairpins. Thanks for your insight. I was surprized by the yellow stimulus also. I went from the dangerous (to me) Purple Durians to the yellow (harder) Stimulus and got a lot more grip and ok slide. Do smaller wheels beget more traction? Would a smaller and harder wheel make for better grip AND "slidablity"? I'm doing ok with the large profile/soft Orange In-heat, but sliding is still a chore for me with them and I feel like I'm on the edge of their traction limits. I'm not a huge quiver guy. I'd rather have one or two boards (snow and long) that through careful choice can do it all...but then maybe I'm asking too much again! Quote Link to comment Share on other sites More sharing options...
xxguitarist Posted January 1, 2011 Report Share Posted January 1, 2011 I'm not a huge quiver guy. I'd rather have one or two boards (snow and long) that through careful choice can do it all...but then maybe I'm asking too much again! This depends on your definition of "all" You'd be hard pressed to do park, slalom, long distance pumping, technical sliding, carve/drifting, dancing, and speedboarding on one, two, or even 3 boards. This said, I ride one snowboard. I have quite a few self-made skateboard decks. Quote Link to comment Share on other sites More sharing options...
rjnakata Posted January 2, 2011 Author Report Share Posted January 2, 2011 This depends on your definition of "all"You'd be hard pressed to do park, slalom, long distance pumping, technical sliding, carve/drifting, dancing, and speedboarding on one, two, or even 3 boards. I totally agree. Maybe my "all" was too broad. A restate might sound like: I want just one of each: park, slalom, long distance pumping, technical sliding, carve/drifting, dancing, and speedboarding! Edit add: IF I could do all those disciplines. Ha! Quote Link to comment Share on other sites More sharing options...
pokkis Posted January 3, 2011 Report Share Posted January 3, 2011 Wheels for winter time Quote Link to comment Share on other sites More sharing options...
rjnakata Posted January 6, 2011 Author Report Share Posted January 6, 2011 the Venom slide wheels are called Sidewinders and they are centerset and not much like any Krypto I have ever seen the Cannibals have been out for a few months (see pic below) I haven't skated them but a friend who works for Zak is supposed to be in town this weekend so hopefully I'll get to try them. I've heard they stick better than Nersh not as well as Centrax and slide/drift smoother than either. Hey Gecko, Did you ever get to try the Cannibals?..what duro? I'm really considering those. What did you think! I gotta know!! Quote Link to comment Share on other sites More sharing options...
rjnakata Posted February 10, 2011 Author Report Share Posted February 10, 2011 the first round of DH wheels influenced by Manx have been and gone, they were......slow (I think they were called shockers). the Venom slide wheels are called Sidewinders and they are centerset and not much like any Krypto I have ever seen the Cannibals have been out for a few months (see pic below) I haven't skated them but a friend who works for Zak is supposed to be in town this weekend so hopefully I'll get to try them. I've heard they stick better than Nersh not as well as Centrax and slide/drift smoother than either. Another really good choice would be Classic thane Zig Zags or Big Zigs traction shape semi drifty thane I would recommend 78a Flashbacks are another choice Thanks everyone for all the wheel advise. I ended up getting the Venom Cannibals (White 78a). I've only ridden once and they grip better than Otang In Heat Oranges, and of course ride softer. They roll really nicely. I'm still breaking them in, so no slides yet. I'll report later. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.