BPS Revealed!

[Donek]

So compatible with upm ?

It would appear that last seasons Hangle pattern will line up with a 57cm distance on the pins, but will not allow for adjustability.

[fin]

James: just measure what you have on that board and then compare to ther UPM pattern. Let us know what you get.

[bobdea]

James: just measure what you have on that board and then compare to ther UPM pattern. Let us know what you get.

that a zach kay board?

if so, I have one of his as well, I can measure it wednesday.... be neat to compare to see the changes over time.

[James Ong]

that a zach kay board?

if so, I have one of his as well, I can measure it wednesday.... be neat to compare to see the changes over time.

I just used Zach's board as a reference, curious about the different patterns and what would be compatible with fin's plate.

[CarvingScooby]

(What I've learned) There are 2 different dimensions of the 2 screws version.

The 28/30 mm width I'm talking about is the width between insert holes. So if you messure from the center of one hole to the next closest one, it should either be 28 or 30mm apart.

Cheers

RT

[bobdea]

(What I've learned) There are 2 different dimensions of the 2 screws version.

Cheers

RT

and there's offset holes in the two hole, 28 mm ones as well. pretty sure the oldest 3 hole ski screw brackets were 28 mm for the two outer holes.

now the newer ones use brackets that make the offset for you.

so, it went

ski screws with offset mounting, 28 mm inserts that also were offset. 28 mm with parallel holes and later 30mm with parallel holes now we have UPM which is similar but with more holes?