Enzo Posted February 16, 2010 Report Share Posted February 16, 2010 2003 Volkl SL 163 Renntiger. Ridden about 30 days total. PTC tuned last season and used only twice since the tune. Topsheet is in great condition. Structure is excellent and edges are sharp. MikeD did a light grind so there are a few immeasurable surface nicks on the base that didn't get ground out--nothing out of the ordinary. Great board for a newbie. $150 SOLD TD2 Standards. 1 set still available. Good condition. You choose the cants and E-Rings. I have a few 3 and 6 deg cants available and 1 pair of yellow and 1 pair of purple E-rings to choose from. $190/set TD2 Suspension Kit – Used for 1 season. $35 SOLD Bomber BTS. Purchased new in January 2007 (original design). About 100 days on them. The paint on the springs is chipping away which is purely cosmetic. The bottom brackets are loose so the bolts need some Loctite or Mighty Putty on them to tighten things up. A set of yellow and blue springs are included. $50 SOLD All prices include shipping to lower 48. Paypal preferred. Email me through my profile. Quote Link to comment Share on other sites More sharing options...
DiveBomber Posted February 16, 2010 Report Share Posted February 16, 2010 interested in the volkl, what is the waist width? Quote Link to comment Share on other sites More sharing options...
Chubz Posted February 16, 2010 Report Share Posted February 16, 2010 email sent on BTS Quote Link to comment Share on other sites More sharing options...
retronaut Posted February 16, 2010 Report Share Posted February 16, 2010 Damn you guys are fast. There were no posts when I started typing now I'm 3rd in line for the BTS. BTS please. Thanks Paul Quote Link to comment Share on other sites More sharing options...
retronaut Posted February 16, 2010 Report Share Posted February 16, 2010 I think I see 3 pairs of disc and and only 2 pairs of cants. If you have extra 4 hole discs let me know, I need a pair to complete a set of TD2. Thanks, Paul Quote Link to comment Share on other sites More sharing options...
Enzo Posted February 16, 2010 Author Report Share Posted February 16, 2010 interested in the volkl, what is the waist width? The waist width is 19.5cm. I think it's a ~9m sidecut as well. Pretty turny!! Quote Link to comment Share on other sites More sharing options...
Enzo Posted February 16, 2010 Author Report Share Posted February 16, 2010 I think I see 3 pairs of disc and and only 2 pairs of cants.If you have extra 4 hole discs let me know, I need a pair to complete a set of TD2. Thanks, Paul Good eye!! $15 shipped??? Quote Link to comment Share on other sites More sharing options...
Scuff Posted February 16, 2010 Report Share Posted February 16, 2010 Interested in the board. E-mail sent Quote Link to comment Share on other sites More sharing options...
BlueB Posted February 16, 2010 Report Share Posted February 16, 2010 I'll take the susspension kit and the spare pair of 4-hole discs if retronaut didn't already. In case you don't get my email (bomber mail missbehaving recently), mail me at: boris at blueb dot biz Quote Link to comment Share on other sites More sharing options...
Enzo Posted February 17, 2010 Author Report Share Posted February 17, 2010 Divebomber- You were first to post up about the Volkl so you have 1st dibs. Email me ASAP if you want it. I've got someone else ready to pull the trigger. Let me know. ova Quote Link to comment Share on other sites More sharing options...
Enzo Posted February 17, 2010 Author Report Share Posted February 17, 2010 Sale pending on Suspension Kit. Who needs bindings?? If you're still riding TD1's it's time to upgrade!! Quote Link to comment Share on other sites More sharing options...
pebu Posted February 17, 2010 Report Share Posted February 17, 2010 Damn! Thirdsies for the volkl? Quote Link to comment Share on other sites More sharing options...
greysontrays Posted February 17, 2010 Report Share Posted February 17, 2010 BTS...email sent. Quote Link to comment Share on other sites More sharing options...
DiveBomber Posted February 17, 2010 Report Share Posted February 17, 2010 I sent a reply to your email enzo, just incase you didnt get it, let me Id like to take the Volkl and get it asap please. Quote Link to comment Share on other sites More sharing options...
Enzo Posted February 18, 2010 Author Report Share Posted February 18, 2010 Divebomber, Got your email and responded. Quote Link to comment Share on other sites More sharing options...
teach Posted February 18, 2010 Report Share Posted February 18, 2010 In case the BTS is still available, could you put me in line for it please? Thanks. Quote Link to comment Share on other sites More sharing options...
teach Posted February 23, 2010 Report Share Posted February 23, 2010 If you would you sell the TD2 step-in heel receivers separately (if they don't go with the TD2s) I'm interested. Any word on the BTS? Quote Link to comment Share on other sites More sharing options...
Enzo Posted February 23, 2010 Author Report Share Posted February 23, 2010 Teach- I'll sell you the heel receivers. I'm on vacation this week away from all my gear that's for sale. I'll sort things out Sunday night when I return home. If anyone needs TD2's I'll be at ECES Wed, Thurs, Fri. Make me a reasonable offer. Quote Link to comment Share on other sites More sharing options...
teach Posted February 25, 2010 Report Share Posted February 25, 2010 Great, next week then! Quote Link to comment Share on other sites More sharing options...
brihumphries3988 Posted February 26, 2010 Report Share Posted February 26, 2010 $175 with shipping bill me thur paypal include the ad so i know what included thanks humphriesbrian@mac.com Quote Link to comment Share on other sites More sharing options...
teach Posted February 26, 2010 Report Share Posted February 26, 2010 brihumphries3988, you seem to be new and looking for a whole set-up, like me. So let me point out a few things. For these bindings you choose how soft or hard you want the elastomers to be (soft = yellow., hard = purple) and what cant disks you want (0, 3 or 6 degree). I went with two 3 degree disks first. You can rotate them to vary the tradeoff between cant (front-to-back angle) to lift (along long axis of boot, or perpendicular to board, not even sure how people measure this). You probably want to get a few disks so you can try different combinations, but 2 3 degree is a good start. You probably won't hate it. The 0 degree disks don't change anything when you rotate them... but a lot of people ride flat. The $190 asking price includes shipping. That's a pretty good price here, especially as the TD3s new go for $350. These things are truly bomber construction, so don't really lose anything with use (except step-ins, but these aren't). The major difference with the TD3s is the elastomer (TD3 elastomer is thicker). You can even use TD3 elastomers on the TD2s if you also get the TD3 center disks (they're thicker to match). Correct me if I'm wrong, of course. You might want to ask if you can get an extra cant disk or two (a 0 and a 6?) for some additional $ to try out various combinations. Then sell the ones you don't use here, or trade for other goodies. Or keep them in your spare parts collection, because who knows? Now maybe I've got you all wrong and you're a veteran hardbooter. In that case, sorry, ignore all this, and have at it! Quote Link to comment Share on other sites More sharing options...
MR. JOHN DEERE ! Posted February 26, 2010 Report Share Posted February 26, 2010 eh teachy, you forgot to mention that the guy that is selling these, is in the top 5 riders on bol! he runs with the wrong crowd and drinks pbr's like there's buck urine in them! he pisses on used tampons to attract deer and he $hits from a fhukkin tree stand, he looks like hes in a fuhkin bike gang, and his buddies play the role pretty well themselves, so who's buying these fhukkin td'3, because we know where you live yfp's, and we like road trips!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! nuff with the tire kikkin! brihumphries3988, you seem to be new and looking for a whole set-up, like me. So let me point out a few things. For these bindings you choose how soft or hard you want the elastomers to be (soft = yellow., hard = purple) and what cant disks you want (0, 3 or 6 degree). I went with two 3 degree disks first. You can rotate them to vary the tradeoff between cant (front-to-back angle) to lift (along long axis of boot, or perpendicular to board, not even sure how people measure this). You probably want to get a few disks so you can try different combinations, but 2 3 degree is a good start. You probably won't hate it. The 0 degree disks don't change anything when you rotate them... but a lot of people ride flat. The $190 asking price includes shipping. That's a pretty good price here, especially as the TD3s new go for $350. These things are truly bomber construction, so don't really lose anything with use (except step-ins, but these aren't). The major difference with the TD3s is the elastomer (TD3 elastomer is thicker). You can even use TD3 elastomers on the TD2s if you also get the TD3 center disks (they're thicker to match). Correct me if I'm wrong, of course. You might want to ask if you can get an extra cant disk or two (a 0 and a 6?) for some additional $ to try out various combinations. Then sell the ones you don't use here, or trade for other goodies. Or keep them in your spare parts collection, because who knows? Now maybe I've got you all wrong and you're a veteran hardbooter. In that case, sorry, ignore all this, and have at it! Quote Link to comment Share on other sites More sharing options...
teach Posted February 26, 2010 Report Share Posted February 26, 2010 Dang, if I'd known that, I would certainly have said so! Now I know... Quote Link to comment Share on other sites More sharing options...
brihumphries3988 Posted February 26, 2010 Report Share Posted February 26, 2010 i am very new to this but know i will love it so the td3 and td2 can use the same yellow base? i think i want 3% in front and 6 in back a with soft base. i have been watching and leaning form you-tube ???? i am headed to utah march 25th for a week and want to have the right bindings and extras parts . also i have 2 boards and how would you set . 2 bases plates and change the long part? thanks Quote Link to comment Share on other sites More sharing options...
teach Posted February 26, 2010 Report Share Posted February 26, 2010 No, the yellow e-rings (elastomers) are different (thicker on TD3), and so are the center disks. You want a "second board kit" I guess: a second set of cant disks, e-rings, center disks, and screws. (Although you can just move the whole thing from one to the other without too much more work.) TD3s are new last year so you won't find many used here, and when you do they go fast. You could just get TD2s and get a TD3 second board kit. Then if you like the TD3 e-rings, sell the TD2 parts you don't want (e-rings, center disk, hardware to mount center disk to board) here. This also gives you the chance to try different cant disk combinations. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.