Board edges

[Marjo]

When it comes to sharpening your board's edges, what is your base edge and side edge tuning ?

I live on the east coast, so my edges are set to better handle icy conditions;

Base edge angle is 0, side edge angle is at 88 degrees.

What's the set up for your edges ?

Marjo

edges.zip

[jtslalom]

Marjo,

I think the Volkl Renn Tiger you bought was a one degree bevel on the base and a one degree bevel on the edge (89). It did have a base grind within the last 10 outings. If I were you I would stay consistent with that bevel.

[Marjo]

Thanks Mark for the info, I'll keep that in mind.

Marjo :)

[Kirk]

However they come from the factory - I just try to keep 'em sharp and polished.

[Sinecure]

1/3 Is that larger or smaller than 0/90?

[Marjo]

Sinecure,

1/3 ... would be that the base edge angle is larger than 0 degrees and the side edge angle is smaller than 90 degrees (in your case 87 degrees).

Marjo

[Bullwings]

i'd like to go more, but i want my boards to last me. don't want to eat up too much material.

[bobdea]

I have ridden 2 and 3, that works too

IMHO as long as you have a degree of base bevel life is good and just experiment from there