sleevez

finally got a sec to get online again, been busy setting up, im here at ATI drop by our booth (south hall and play sum xbox :)

damn, can't make it up tomorrow, flying out to vegas for nye then work :P but i'll be back on the 10th, let me know if you guys wanna have an informal carving session holla :) happy holidays. !

sweet, i always wonder about parking up there.. is it easy to get to? anyways i have a orange H/H jacket. but ya, just ping me when you are heading up to blue. cheers,

what do you ride? and which run do you usually stay on? im either on a 183 black nidecker, or 164 yellow burton and im usually on the south base, some time over to the middle part. let's hook up in the new year, i will be away till the 10th,

Hey Eaglez, where do you ususally ride? im not at any instuctor's level or anything. but im looking for more hard booter to ride with. im usually at blue during fri/sat nites'

hey any1 got more details on this strike they are saying might happen over the wkend? i already booked the wkend up there. so im kinda screwed here, anyways any infro would be appreciated. thanks

ah rite rite.. i thought it's some sort of carver's event !! got me all excited for nothing :P btw are we gonna have a meet again this year ?

what's MSLM ?

sweet thanks Henry, when are we heading up to collingwood for a session ?

Hey any1 gonna be carving it up @ tremblant this weekend ? i'll be there friday - sunday and also any good open groomers you guys might suggest ? thanks.

ah i'll be there friday morning till sunday !! which is a good run to look for open groomers?

hhaha, yeah i had the honor in riding with PSR as well, (btw Dragonsword - im the dude with the yellow burton FP that rode with you for a few runs) too bad i had to leave early (had a 9 hrs drive back to good old flat land Toronto) but yeah.. THANkS again Eric, i showed him 5 turs and right away he could point out a hand full of things i could fix on my riding style. and they WORKED!!.. now i know how to load up my tail at my toe side exit and some how that fixed my heel side turns too. now im dying to head back out to killington. too bad it's 9 hrs away.. and all the other run SUCKED.. it was pretty a dirt trek other than that open blue run under ram's head. !! hey is any one heading up to Tremblant next wkend ?? i am if any one wanna hook up :) and hey Dragonsward how did i look out there? :o

sweet thanks for all the suggestions, my other question is.. is there even of a base at this time of the year ? don't really wanna messup the base of the beast so early in the season. !!!

yeah i think we should be there for the 1st chair up. the only thing is.. im already taking a softbootsetup for sunday.. i don't know if i will have that much room to bring all 3 of them up. althought i would loveeeee to have that 183 rip down there...... hummmm.. !!! and also i will have to leave the board in the car !!

Im heading out to Killington this wkend !!!! i think they are projection 50+ runs with 14 lifts this wkend :D just want some suggestions on which board i should take up to killington VT 164 burton factory prime with scr of 11 i think. or 183 nidecker gs with scr 13, how open are the runs up in killington (never been), would the 183 gs be too big for it? thanks.

i'll pick this up along with your td2 setup ;) hit me back @ sleevez@gmail.com ps email sent a while ago ;)

Hey Kirk, and Mr Colon, thanks for all the input / suggestions so where could i find these wedges ? is it like those arch support thing ? i think when i carve.. i put pressures on the outside of my foot + a lil heel lift. i dont' know why i could tighten the instep all the way down. becaouse the foot is a perfect fit in the liner, oh and i think when it was brand new the boot feel tigher.. so should i put some soles under the liner? oh and dave from yzz checked my feet and pick those boots for me :P and you guys don't think it's nothing to do with cant / lifts ?? actually i put the os1 standard on the 183, with no cant / lifts because i want to start with nothing and work myself up. but yeah after 2-3 hours. i was done for. so i switched to my softboot, and it kinda went away, then i missed hardboot too much so i switch back but on my tds + burton FP 164 and it wasnt' asbad but after 2 hours i could slow tell its coming back. but i just pack it in for the day. and as for the 183,, i really didnt' get to push her :( it wasn't groomed. and tons of fresh powder, it got a lil better when ppl pack it down, but even with the powder cuz of the length of it.. i could push the board alot more than the 164 burton before the nose dive into the thick powders.. but once i sorted out this foot problem i'll be loving the nidecker. oh and some bastard skiier took me out while i was on the 183,, and gave her a lil battle scar anywyas thanks again.

Hey Kirk, and who ever could help. just got back from a lil season opener at this baby hill not far from here.. been dying to test out that 183 Nidecker which i got from Kirk over the fall. anyways.. i had this problem at the begining of last year. but as the season went on it slowly got away.. but now it's back again :( anyways i have a pair of Leman's brought new last year. they were my size and they fit pretty good, and i'm on a set of TD2 with yellow ering 3 degrees lift, 60 front 55 back. and the stance are 19.5, I'm 5'8ish i would say after 3hrs or so of hard carving out there, i would start to feel this pain at my abductor Hallucis - the arch of the foot near the heel. this only occur at my left foot - back foot (i ride goofy). is there a fix for this? i tired adding some cant to it. it helps alitte, but it really kills, to the point that i could barely walk on it or even touch. and it hurts to bent my big toe up as well. oh and some times during my carves.. it feels like my heels are lifting within the boot. but i have already put ankle strap to the tightest position.. any suggestions are welcome thanks in advance.

how bout the K2 mountain. isn't it a few hours by plane ?

sweet, nice RR, as well. i ride a 05 R1, wonder how would our bikes run in those temp. but yeah.. im just waiting for a chance to head down there. to my understanding there should be tons of tech. related positions out there rite ?

Hey RDY_2_Carve, what do you do over at Dubai? im actually interested in looking for employment there, do you have any connections? maybe we could go carve it up over there ;) what would you say 1.5 turn or 2 ?

might be interested.. drop a line over -> sleevez(at)gmail.com thanks.

hey ARCrider, how far away is leMassif from Tremblant? i booked a trip to tremblant fromt he 15-18 of dec. it was a pretty sweet deal 260CAD each for 3 days of lifts. + transportation to and from Toronto, plus slope side hotel for 6 ppl. anyways wondering if they will have enough snow up there at that time frame this year. i have been going to tremblant more or less the same time frame for the past 3 years and they always manage to get TONS of snow in.. but i just checked the webcam.. and it's still a golf course out there :P do you guys think they will get a huge dumping soon ?

cool thanks jdgang, hey would you also happen to know if the heel will fit on my Deeluxe Lemans (Raichle SB 423) ??

man.. i would love to drop by as well. but i have to see a client at 7 out in Oakville. probbaly won't be done till 8:30.. and i doubt you guys are gonna be sticking around that long...