loopback

I think I know the local Paul you met. If it's the same guy he taught there for a while too. He rode Cateks iirc and telemarks too? Yes, I keep in touch with @philpjo! He bought a Pak night pass too and has been up there several times this year. He posted here: I have not bought the night pass @ Pak yet but have been out 5 days @ Calabogie so far. Its getting icey and repetitive on the 3 runs and we need some real snow to open up a few more runs. They added one more run yesterday...

It's on: https://ottawa.ctvnews.ca/snow-starts-blowing-at-calabogie-peaks-in-preparation-for-season-opening-1.5678393 I'm starting this thread to get Ottawa Valley carvers together to ride for this season. I have been barely riding the last few years but have moved less than 10min away from Calabogie Peaks, have a season pass and am looking to ride (alot) this year! I will probably grab a Pakenham night pass too. Also: The old Dacre Heights/Candiac ski kill is open for earning your turns and I am hoping to make a few trips later this winter. They charge nothing and operate on a donation/volunteer basis They are planning a volunteer trail clearing day in early Dec. http://www.dacreheights.ca/ Post in the thread if/when you are heading out this year!! //Paul

I've used this setup at 2 houses.....It will hold 12 carving boards with bindings

Same here! Glad it made it early too. Looks like you are well on your way

It is! We are in the process of moving but I don't think I have packed them up yet. I will dig it out and get you a shipping quote

all sold!

lowered prices and bumping for a new week

I'm good, I read splitboard but thought (and wanted) skwal...

How much??

Time to pay for the new Coiler..... I have the following for sale. I put less than 10 days on snow on any of this. 1. Bomber Boiler Plate 5mm, modified with keyhole cuts, not ridden since. includes the 2 axles and their retaining screws $100 $75 USD 2. 4 hole Boiler Plate 2nd Board Kit with all HW $200 $170 USD 3. another 4 hole Boiler Plate 2nd Board Kit with all HW $200 $170 USD 4. TD3 2nd Board Kit BP Version, both 3 degree, the red rings have a couple divets (pictured) with all mounting HW included $90 $75 USD Wunderbar-$10 All the screws with all pieces are original Bomber HW and any screws that showed wear were replaced with new Bomber HW. Buyer pays actual shipping charges. Paypal "friend" payment in USD strongly preferred. If you buy entire the lot for $600 $500 USD I will ship for free via postal service in continental NA. More photos can be provided if needed.

All good guys! The quote and reply function killed me on the cell phone, and may have caused some excessive saltiness on my part.....and I had forgot all about this board before the last minute trip to Tremblant. @powdah, thanks for the stand up move, iirc you and a bunch of the Ottawa crew rode together a few years back and they could not say enough good things about the trip and your hospitality. Dennis and I connected via PM and will be connecting via phone.

Sorry. I headed to Tremblantt yesterday aft and have not been online since. I brought $750 cash and was hoping to stop on my way home to Ottawa on Saturday to pick this up. Too late I guess...

Please do! Am very interested and could probably pick up or meet you if we can work out a deal.

Hi Denis, What weight was it built for? Do you have the SN# Thanks //Paul

I replied to your PM. Oxbow 171 O2 Dangerous Burton FP Blacksmith 158 All still available....

Here's what's left: Oxbow 171 O2 Dangerous Burton FP Blacksmith 158 //P

#1 Coiler is sold. Here's whats left: Oxbow 171 O2 Dangerous Donek Pilot - Sold pending PP Burton FP Blacksmith 158 Heavy Tools Asym - Sold pending PP In case anyone is curious, shipping has been running around $50US for 1 board to $70US for 3 to US zipcode. //Paul

Hi there, how much are you asking for this? and are the bindings included?

Lol, glad it made it safe! I shipped 3 packed together to the US the same day as yours. The cardboard was badly damaged on arrival but the pipe foam insulation saved the day! The #1 Coiler is for sure available. I just gave someone a shipping quote on the Donek and will let you know if they take it or not For sure I can ship to Whistler. //Paul

Will send you a PM later this AM

Hi Bryan, I sent you a PM

No worries! The following are sold: O2 Proton 164 O2 FR 167 Coiler yellow PRC-T Kessler 15?

For sure, I can ship it. Canada Post to USPS is the cheapest. Whats your ZIP code and I'll get a quote. //Paul

Just measured the Proton 164cm, waist is 19.5cm The Blacksmith is cherry too, 19.5cm waist , 158cm

Between reduced riding time, kids getting older and space I am getting rid of all these. Preferred local sale to avoid shipping. But I will ship to US and Canada too at your expense. Prices are in USD for US shipping and $CAD for CDN shipping. Prices are cheap as I got a deal, bought as package, am paying it fwd, etc. Would be great for young racers... Paypal gift preferred. Will take TD2 stuff on trade. **SOLD**Board#1 $25 ***SOLD***Coiler 181 PRC - 1st gen titanal and it shows. Built for former Can National team rider. BEAT 23.2W **SOLD**Board#2 $50 **SOLD**Coiler 171 PRC Titanal..Soft and built for former female (130-150lbs) national team rider Board#2- $25 Oxbow 170 - no info, made in Canada , never rode it #3 - $15 Oxygen Dangerous - don't ride this...ever, 0 taper, the name is appropriate. It was hanging on the wall of my office. **SOLD***Board #5 $50 **SOLD***Donek - Pilot 168cm great shape **SOLD**#6 $25 **SOLD***Oxygen FR167 - great condition, same shape as Prior 4x4 #7 $50 **SOLD** **SOLD**Oxygen Proton 164 - Never mounted w/bindings 19.5 cm waist Titanal board #8 $15 Burton FP 168 pretty BEAT #9 $50 Blacksmith , never on snow, 158cm, 19.5 cm waist #10 FREE to anyone local Oxygen Proton 156cm AKA the NOODLE - the Ottawa Carving community loaner/learning board **SOLD**#11 $50 **SOLD**Kessler SL 15? built for same female National team rider as the yellow Coiler... **SOLD***#12 $20 **SOLD***Heavy Tools Asymmetrical Thanks for looking!