Surf Quebec Posted January 20, 2011 Report Share Posted January 20, 2011 I've received, part of buying a board, an old pair of raichlee 125 boots of my size. I'll use those boots for my soft/powder setup. I was wandering if the BTS would work on these. I've installed the BTS but when flexing forward, the middle part of the BTS moves a lot. Is this normal ? Quote Link to comment Share on other sites More sharing options...
ibrussell Posted January 20, 2011 Report Share Posted January 20, 2011 I've used BTS on my 125's for the last three years and they work great. try to preload the springs. mine wobble a little side to side but not up down. Quote Link to comment Share on other sites More sharing options...
Corey Posted January 20, 2011 Report Share Posted January 20, 2011 The aluminum part that attaches to the upper cuff does tilt forward and backward a bit because the load isn't directly in line with the pivots. The anal engineer in me was a little annoyed/surprised at first but I couldn't think of a better way to do it. It rubs the paint off the springs and creates some fine aluminum powder, but it doesn't cause any issues. Pull your pant cuff over it if it bothers you, and look down the hill for the next turn. Then you don't notice it. ;) I'd rather have a BTS that creates a little bit of fine aluminum powder than to go back to the stock Deeluxe lean adjuster! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.