b0ardski Posted December 9, 2014 Report Share Posted December 9, 2014 (edited) 165x21.5 burton coil, 8/10 except for topsheet chipping that still needs some epoxy from 1st owner jamming the tail into some thing hard. $100 +shipping. 173x18 red factory prime, 5/10 well used, couple of base welds and needs a 1/2 ptex fill near the edge, edges ok, small chip in top sheet towards nose and some between the binders, $45 +shipping. 174x26 K2 eldo 6-7/10, great all mountain board. small top sheet chip near tail, some stress cracks under the ptex at the tip no issue, $75 + shipping SOLD178x26 oxygen summit all mt. rides longer, carves like a tanker top 8/10 base 7/10 lots of camber & spring left $85 +shipping 150x24.5 arbor mystic stiff for a short board, killer edge hold, rides much bigger, used twice 9/10 $120 + shipping arbor mystic (not rock board) on the left, 150cm short but amazing edge hold, used twice too stiff for my wife, beautiful board. Troy switchcave@yah00.c0m Also have an un used pair of Thor Snowraider kevlar gloves size lg just a tad long in the fingers for me. My middle finger measures 8.5 cm, if yours are 9-10 they'll work. $45 shipped, for $50 I'll add some thin polypro liners. Edited October 29, 2016 by b0ardski Quote Link to comment Share on other sites More sharing options...
Jon Dahl Posted December 9, 2014 Report Share Posted December 9, 2014 Hey, bOardski, interested in the 178 Oxygen Summit. What ya think shipping to the coast is?? Quote Link to comment Share on other sites More sharing options...
b0ardski Posted December 9, 2014 Author Report Share Posted December 9, 2014 Hey Jon I remember you had one of of those you split, musta' liked it. I'd guess being close although over size around $25 +\- Quote Link to comment Share on other sites More sharing options...
Jon Dahl Posted December 9, 2014 Report Share Posted December 9, 2014 Yeah, give me a day or 3. Work schedule is a killer. Can I send you a bank money order? Email me at jon underscore 7rides at yahoo dot com . The Oxygen is no tanker in pow but a good all-rounder and soft enough for my size, unlike the Steepwater Plow I got last season which boarderline kicks my a$$ to the curb. Quote Link to comment Share on other sites More sharing options...
www.oldsnowboards.com Posted December 14, 2014 Report Share Posted December 14, 2014 Sorry to see your Burton Performer Experimental up for auction , I know it meant allot to you. I hope it goes big!! Bryan Quote Link to comment Share on other sites More sharing options...
b0ardski Posted December 15, 2014 Author Report Share Posted December 15, 2014 oxygen sold, Thanks Jon, pics of eldo & coil coming soon. Bryan, yeah selling my 1st board I bought 29 1/2 years ago makes me sad, It's just like the 1st snowboard I ever saw, launching 20' of a cornice into deep pow turns at Schwietzer in '84 lots of fond powder track memories oh well gotta pay for the new split and still trying to justify $850 for the phantom system Quote Link to comment Share on other sites More sharing options...
b0ardski Posted December 15, 2014 Author Report Share Posted December 15, 2014 coil pics Quote Link to comment Share on other sites More sharing options...
garybergmann Posted December 16, 2014 Report Share Posted December 16, 2014 Interested in some pics of the eldo...any idea what shipping would be to Canada? Quote Link to comment Share on other sites More sharing options...
b0ardski Posted December 17, 2014 Author Report Share Posted December 17, 2014 Sent you some pics by email Gary, Will post'em here later. Quote Link to comment Share on other sites More sharing options...
b0ardski Posted December 24, 2014 Author Report Share Posted December 24, 2014 eldo pics Quote Link to comment Share on other sites More sharing options...
Keyser Soze Posted January 11, 2015 Report Share Posted January 11, 2015 Sent you a PM about the Arbor, email was rejected. Quote Link to comment Share on other sites More sharing options...
b0ardski Posted January 12, 2015 Author Report Share Posted January 12, 2015 I did send an email reply, Pascal sorry, the arbor sold quickly Quote Link to comment Share on other sites More sharing options...
Keyser Soze Posted January 13, 2015 Report Share Posted January 13, 2015 Ahhh, no worries. I didn't get the email. Weird. Thanks for letting me know! Quote Link to comment Share on other sites More sharing options...
b0ardski Posted January 18, 2015 Author Report Share Posted January 18, 2015 (edited) Hey keyser soze, I sent you a pm, the 150 mystic is still available. I thought you wanted the koa wood A65 that sold last month. Edited January 18, 2015 by b0ardski Quote Link to comment Share on other sites More sharing options...
b0ardski Posted January 19, 2015 Author Report Share Posted January 19, 2015 Arbor mystic; I would say 140# is light for it's weight range. If your looking for a stiff board for soft boot carving, springy tail for ollies this would fit the bill. It's full camber with a bamboo center beam meant for advanced pipe & allmountain riders, so not too forgiving in powder or butter turns. Demands to be ridden. Quote Link to comment Share on other sites More sharing options...
b0ardski Posted February 25, 2015 Author Report Share Posted February 25, 2015 no reasonable offers refused bump Quote Link to comment Share on other sites More sharing options...
Jon Dahl Posted February 27, 2015 Report Share Posted February 27, 2015 The Coil is calling my name, but TD3 3 hole center discs are $34 each!!! Quote Link to comment Share on other sites More sharing options...
b0ardski Posted February 27, 2015 Author Report Share Posted February 27, 2015 I've got a pair td1 with 3hole but didn't really want to sell'em Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.