Ian M Posted February 11, 2013 Report Share Posted February 11, 2013 (edited) *** SOLD *** Hi all, I have a 2010 Coiler Stubby that I'm ready to pass along! This board works really well for high-performance carving as well as a bit of all-mountain riding. The wider waist allows lower angles, and I found this board very easy to flick between carving and sliding mid-turn. The Stubby is softest in the middle, so the tip plows through crud quite well. This is one of the friendliest metal boards I've ridden, and is a real confidence-builder. Specs are as follows: Length: 170cm Waist width: 21cm Side-cut radius: 13.2m Stance width: 18 / 19.5 / 21in Suggested rider weight: 140-150lbs There are two small edge dings, both on the topsheet side of the board. They are detailed in the photos below. The base is in excellent condition, and has about 5 days on a base grind. Edges are currently set at 0.7 base and 2.0 side. How does $400 sound? Payments by email money transfer (preferred) and PayPal are fine, as are local sales in cash. Shipping is not included, but I will happily work with the buyer to find a suitable option if necessary. Cheers! Ian :) Edited February 13, 2013 by Ian M Sold! Quote Link to comment Share on other sites More sharing options...
Guest Posted February 12, 2013 Report Share Posted February 12, 2013 (edited) Interested - PM sent Edit: backing out - I think the cross-border shipping puts this out of my price range. Nice looking board! Edited February 12, 2013 by NickG Quote Link to comment Share on other sites More sharing options...
west carven Posted February 12, 2013 Report Share Posted February 12, 2013 howdy ian interested, been looking for one of these and in my weight range. how many days on this thing. what was rider weight built for? Quote Link to comment Share on other sites More sharing options...
Ian M Posted February 12, 2013 Author Report Share Posted February 12, 2013 Hi west carven, The board has about 50 days in total. It was built for me at 165 lbs, but I asked Bruce to build me an 'ice monster' that was really controllable on full ice. He did, and the board is therefore quite soft for my weight - too soft for me to ride hard on hero snow. Before posting this, I asked him what weight range I should list it at for middle-of-the-road hero snow, and his response is what I listed above: 140-150 lbs. Cheers! Quote Link to comment Share on other sites More sharing options...
powdahbonz Posted February 12, 2013 Report Share Posted February 12, 2013 For all of you considering this board, I will be going over the boarder and back and could carry to save your shipping burden if that helps...I'm sure Ian would be for that to make the transaction easy on you. Quote Link to comment Share on other sites More sharing options...
Ian M Posted February 12, 2013 Author Report Share Posted February 12, 2013 ^ Thanks Bonser, good idea! Powdahbonz will be joining us for the Northeast Session Feb. 23-Mar. 1 at Owl's Head/Jay Peak. Quote Link to comment Share on other sites More sharing options...
ashychef1 Posted February 12, 2013 Report Share Posted February 12, 2013 Hi! I am interested in your board. I sent a PM, but not sure if it went through. My email is ashychef@yahoo.com. Thanks! Ash Quote Link to comment Share on other sites More sharing options...
Ian M Posted February 12, 2013 Author Report Share Posted February 12, 2013 Yes, I got your PM ashychef1. You're first in line at the moment :) Quote Link to comment Share on other sites More sharing options...
west carven Posted February 12, 2013 Report Share Posted February 12, 2013 howdy ian just rode my 171stubby tight and really like the flex on mine. just wondering what is your sidewall numbering? probably doesnt matter and is only known to bruce, but just wondering. thanks Quote Link to comment Share on other sites More sharing options...
Ian M Posted February 13, 2013 Author Report Share Posted February 13, 2013 howdy ianjust rode my 171stubby tight and really like the flex on mine. just wondering what is your sidewall numbering? probably doesnt matter and is only known to bruce, but just wondering. thanks Hi west carven; the sidewall says T171 STUB 21 010IM1 6.3 + 4.5 for your interest. Thanks all, this board is SOLD! Quote Link to comment Share on other sites More sharing options...
ashychef1 Posted February 14, 2013 Report Share Posted February 14, 2013 Ahh, screamin' dealGlad you got on it, just take a small flat file and file those rough edges on the top sheet down so nothing get's caught, there's a titanal layer and it doesn't want any sudden surprises,no big deal Ursle, thanks for the heads up on this-board is on the way!! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.