Puddy Tat Posted January 6, 2012 Report Share Posted January 6, 2012 Teaching my daughter to hardboot. If anyone has a set of junior sized bindings they can sell me I'd appreciate it. Dave Quote Link to comment Share on other sites More sharing options...
JDB Posted January 7, 2012 Report Share Posted January 7, 2012 I don't know how small you need to go, but Burton Race Plates can be made smaller than standard by reversing the bails in the mounting blocks. ( pop the bails out of the block, spin the block 180 degrees then re-insert the bails, remount the block to baseplate in reversed to normal position.) Bails are then toward the disk side of the screws holding the blocks. By doing this to both heel and toepiece can reduce the minumum size by near an inch. Quote Link to comment Share on other sites More sharing options...
www.oldsnowboards.com Posted January 7, 2012 Report Share Posted January 7, 2012 If I remember correctly, Dave needs bindings for a Burton 3D pattern. Quote Link to comment Share on other sites More sharing options...
GoofyFoot Posted January 9, 2012 Report Share Posted January 9, 2012 Dave, However, if it is a 4 X 4 pattern you need, I have a small set of plate bindings you can have for $20 (& postage). Brian Quote Link to comment Share on other sites More sharing options...
Puddy Tat Posted January 9, 2012 Author Report Share Posted January 9, 2012 Dave,However, if it is a 4 X 4 pattern you need, I have a small set of plate bindings you can have for $20 (& postage). Brian PM'd you. If you don't get it drop me an email at "webbed (at) shaw (dot) ca" Dave Quote Link to comment Share on other sites More sharing options...
Puddy Tat Posted January 17, 2012 Author Report Share Posted January 17, 2012 Bumpity. Still looking for an actual junior sized binding. Quote Link to comment Share on other sites More sharing options...
Derek53 Posted January 25, 2012 Report Share Posted January 25, 2012 I have Burton cattrap bindings it want them ones blue and ones purple for 40 plus shipping. Quote Link to comment Share on other sites More sharing options...
www.oldsnowboards.com Posted January 25, 2012 Report Share Posted January 25, 2012 I have Burton cattrap bindings it want them ones blue and ones purple for 40 plus shipping. Photos of your bindings would be really helpful. I think you mean Rat Traps, maybe? PHOTOS. Quote Link to comment Share on other sites More sharing options...
www.oldsnowboards.com Posted January 25, 2012 Report Share Posted January 25, 2012 Jr Bindings. I am going to make another attempt to dig out some older Drake Bindings for small feet. They are four hole only mounting. I recall there is an issue with mounting and stance options? I may need reminders these days. Allot going on and I am old :rolleyes: I have several pair. NIB They look really good, metal plate, plastic toe and heel blocks. Quote Link to comment Share on other sites More sharing options...
Puddy Tat Posted January 25, 2012 Author Report Share Posted January 25, 2012 As Brian said, photos would be great. Dave Quote Link to comment Share on other sites More sharing options...
Derek53 Posted January 26, 2012 Report Share Posted January 26, 2012 It was a typo I did rat traps. They are the 3d pattern. And I can't seem to upload the picture from my iPhone so I will try to post it from My computer. Not the bindings off my board just show you what they look like and the color. I can upload the two pairs I have it you want or if you have email that would be much easier. Quote Link to comment Share on other sites More sharing options...
www.oldsnowboards.com Posted January 26, 2012 Report Share Posted January 26, 2012 I found some photos from a while back. I believe I have three pair of these. First , photos of the bindings. Next, photos to help explain the conflict with mounting bolts and some binding angles. Hope this helps. 50$ INCLUDING shipping in the USA. Not shipping outside the us (Dave, you are an exception after your long wait on this item.) Love to see some young people get into carving. Local riders , you are welcome to borrow a pair. Photos of the young carvers using these bindings will net you a future discount. :D Quote Link to comment Share on other sites More sharing options...
www.oldsnowboards.com Posted January 26, 2012 Report Share Posted January 26, 2012 It was a typo I did rat traps. They are the 3d pattern. And I can't seem to upload the picture from my iPhone so I will try to post it from My computer. Not the bindings off my board just show you what they look like and the color. I can upload the two pairs I have it you want or if you have email that would be much easier. Derek. I would take them for the collection at both pair shipped for 40$ ? Quote Link to comment Share on other sites More sharing options...
www.oldsnowboards.com Posted January 26, 2012 Report Share Posted January 26, 2012 Photos of Drake Jr Bindings and potential conflicts. Quote Link to comment Share on other sites More sharing options...
Derek53 Posted January 26, 2012 Report Share Posted January 26, 2012 I was hoping to get 40 for one pair plus shipping but I could do 70 for both shipped if thats reasonable to you? Quote Link to comment Share on other sites More sharing options...
www.oldsnowboards.com Posted January 26, 2012 Report Share Posted January 26, 2012 I was hoping to get 40 for one pair plus shipping but I could do 70 for both shipped if thats reasonable to you? Hi Derek. Reasonable? Probably. I am not interested at that price I am afraid. Let's move off this WTB thread with out conversation? Ok? Thanks, Bryan Quote Link to comment Share on other sites More sharing options...
Derek53 Posted January 26, 2012 Report Share Posted January 26, 2012 I could drop to 60 shipped if you could do that Bryan? Quote Link to comment Share on other sites More sharing options...
ziolino66 Posted February 2, 2012 Report Share Posted February 2, 2012 Hi Dave, is it possible a really small adult binding would fit? I've got "Base" Snopros that were being used with mondo size 25 (?) boots, with a fair bit of downsizing adjustability left. By quick, rough measurements ends of bail to bail adjusted to 25 boots was 30 cm (boot locked in position), and adjusted to smallest size measured 27cm. Thought it to be worth a try, let me know, Lino. CORRECTION*** Sorry...got'em mixed up, pair that seem to allow smaller adjustment are the "Hot" bindings, believe there just rebranded Snopros. (I've got them both for sale) Quote Link to comment Share on other sites More sharing options...
FMK Posted February 13, 2012 Report Share Posted February 13, 2012 Dave, Did you find what you were looking for? I have these Burton Jr. bindings I would love to see someone enjoy! (I also have a pair of Burton Reactor 4 buckle boots size 23.5 with brand new liners.) Quote Link to comment Share on other sites More sharing options...
Puddy Tat Posted February 13, 2012 Author Report Share Posted February 13, 2012 Ok I've found what I am looking for. I apologize for not responding to post earlier. FMK I'll drop you a PM. Dave Quote Link to comment Share on other sites More sharing options...
Puddy Tat Posted February 22, 2012 Author Report Share Posted February 22, 2012 FMK, Those bindings arrived. Thank you very much. Dave. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.