skrekk Posted March 22, 2011 Report Share Posted March 22, 2011 Anyone have some old stock liners? Looking for cheap Mondo 28.5 liners to be used in a 3-strap Raichle boot, so they can either be mid or full height. They don't need to be heat moldable. Quote Link to comment Share on other sites More sharing options...
omskates Posted March 23, 2011 Report Share Posted March 23, 2011 I don't know if this is helpful to Skrekk or anyone else but many of the more modern softies have intuition mouldable liners. This usually works fine on low to mid height hard boots. I had found a pair of barely used Thirty-Two Lashed softies for less than $20 shipped and quite sure the liners were never heated. Came with a decent foot-bed that went under the liner. I did the heat mould process with them in my old Oxygen 3-strap Kryptons and am very happy with the results. Some brands to look at, for this approach, are Thirty-Two, Ride, Vans, K2, etc. Look very very carefully at the photos & sizing if using fleabay and then cross reference the boots for more info before bidding. Cheers --Chandler Quote Link to comment Share on other sites More sharing options...
skrekk Posted March 23, 2011 Author Report Share Posted March 23, 2011 Good idea - I'll check that out. Thanks. Quote Link to comment Share on other sites More sharing options...
carvedog Posted March 23, 2011 Report Share Posted March 23, 2011 I may have some 28.5 Fire liners, brand new. If I can find them. Footbeds should go on bottom of foot. If it is under the liner then it is something else. ;) Quote Link to comment Share on other sites More sharing options...
skrekk Posted March 23, 2011 Author Report Share Posted March 23, 2011 Carvedog, let me know if you find them and what you'd want for them. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.