Shred Gruumer Posted January 14, 2008 Report Share Posted January 14, 2008 I didn't think people would need to know this since they are vintage boards but,, I guess people just gotta know this.. I don't have them.. Does any one have the full specs for the circa 1990-91 PJ-7, and PJ-5 Thanks, Shred Quote Link to comment Share on other sites More sharing options...
madlibs69 Posted January 14, 2008 Report Share Posted January 14, 2008 PJ 5.6 overall length 155cm Running length toe-132 heel -133 nose length 170 tail length 50 nose radius 300 tail radius 250 nose width 271 waist width 223 tail width 279 sidecut depth 27/25 sidecut radius 8.3m/8.8m sidecut offset tip 50 tail 70 rotated aymetric quadratic sidecut camber height 12 weight (kg)3.3 sintered 2000 ptex base phenolic sidewalls aluminum nose protection good for riders over 140lbs I have specs for the 6.3 as well and the m series for that year....tired of typing though. Do u need the 6.3 specs too? Quote Link to comment Share on other sites More sharing options...
Shred Gruumer Posted January 14, 2008 Author Report Share Posted January 14, 2008 I don't know if they are the same you know the pj5 and 7 im refering to.. I measured the pj five and it is barely 150 from tip to longest part of the tail.. but who know.. it the pj with purple tail and the 7 with the green see pic.. Quote Link to comment Share on other sites More sharing options...
Jack M Posted January 14, 2008 Report Share Posted January 14, 2008 '93 PJs were way different than '91. '93's had dual asym offset - more offset in the tail than in the nose. '91 PJ5s was 149.5cm, iirc. Quote Link to comment Share on other sites More sharing options...
madlibs69 Posted January 14, 2008 Report Share Posted January 14, 2008 Yes different boards..the 93 pj5 was a blk/grey and the pj6 had bluish/blk with a sorta brown in part of the tail. I remember them plates..had a bunch of them...would break the 1/4" frame off on both sides at the heel. I also remember using the little block wedges, stacking them for toe/heel lift. I can get them specs...just need a few days to go though some old catologues. If you cant wait, PSR will have them..hit him up on freecarve. Quote Link to comment Share on other sites More sharing options...
Carp Posted January 14, 2008 Report Share Posted January 14, 2008 I had this board. In my opinion still the coolest base design I've seen to date. Not sure on the specs but I could see if I could dig up an old catalog. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.