Chubz Posted November 1, 2006 Report Share Posted November 1, 2006 Folks Just wondering if those folks that have natural wood on the board graphics (Arbor) if they use regular clear topsheet for lay up or do they use a gym floor type urethane or epoxy. Let me know if you have any clue. Greg Quote Link to comment Share on other sites More sharing options...
Dr D Posted November 1, 2006 Report Share Posted November 1, 2006 I know John, from Garage, was experimenting with the clear coating they use on golf balls. I guess the coatings that are normally used are somewhat shortlived or prone to wear. He was having trouble keeping it smooth last I checked. Quote Link to comment Share on other sites More sharing options...
Donek Posted November 1, 2006 Report Share Posted November 1, 2006 Arbor uses a real wood veneer with a proprietary clear coat. A few years ago there was a write up on them in one of the business mags that said arbor actually prepared the topsheets prior to sending them to ride for production. This indicates to me that they are priinting and coating the veneer before the board is actually pressed. I think it's a pretty closely guarded secret. If I was to guess, it most likely just a curtain coating process after screen printing, but I could be way off. Quote Link to comment Share on other sites More sharing options...
nils Posted November 1, 2006 Report Share Posted November 1, 2006 i also think its a very good curtain coating on the arbor... its the simpliest way to get a thick varnish.. other solutions implies sanding a lot between each layer.. I'm not sure its done before the pressing because it would imply protecting the topsheet from resin marks... but its not unmakable ( all topsheets are protected during pressing usually)... Swellpanik and miura use polyurethane varnish that they sand a lot with wetpaper Quote Link to comment Share on other sites More sharing options...
Chubz Posted November 1, 2006 Author Report Share Posted November 1, 2006 I had planned on doing coats on my wood veneer and then just making it the topsheet when I do the pressing So they put a coat on and then wet sand and then another coat and wet sand and so on. What is curtain coating? This helps folks as I am about two weeks from my first pressing simply due to work and family schedule. Oh I forgot, I also cut the tip of my left index finger off sunday morning on a table saw, cutting sidewall material. So that has set me back too. Painful? YOU BET!!!!!! Feels like a 24-hour acetylene torch to the tip of the finger. Lastly, this is for Sean, how do I keep layers of material from shifting during lay and pressing. Mind you, I am a lone dude working in my single car garage with out the bells and whistle equipment. Thanks Quote Link to comment Share on other sites More sharing options...
C5 Golfer Posted November 2, 2006 Report Share Posted November 2, 2006 sending them to ride for production. Could be wrong but I don't think Ride is making these for them anymore.. If I remember right once Ride was sold years ago and moved --- Arbor found a place in Canada - BC maybe to make their boards. Maybe Option???? Quote Link to comment Share on other sites More sharing options...
Gecko Posted November 2, 2006 Report Share Posted November 2, 2006 Oh I forgot, I also cut the tip of my left index finger off sunday morning on a table saw, cutting sidewall material. So that has set me back too. Painful? YOU BET!!!!!! Feels like a 24-hour acetylene torch to the tip of the finger. you cut it off? wow I just cut a 1/2" into mine with a bandsaw (also while building snowboards) To this day an Xray of my left index finger shows a notch from the where the blade stopped...I used superglue to close the wound after flushing it with cold beer (I was trying to finish work before drinking anything). BTW it's still sensitive and that was 19 years ago :( Quote Link to comment Share on other sites More sharing options...
Chubz Posted November 2, 2006 Author Report Share Posted November 2, 2006 When I get a chance. This one was a bit more than glue and beer fix. It took all of my previous pain level ratings of 6 or 7 down to about a 2 after the pain cycles I went thru Sunday and Monday night. Percocet (sp?) didnt even touch it, it probably did, but I was in some down right mean a$$ pain. I could feel all of the cuts the surgeon performed to remove excess skin and bone fragments earlier in the day. Thought it was cool to watch until the shots wore off that evening. Whatever you do, do not take a hot shower. Hand kept dry, but the circulation increased and all the pressure went straight to my finger. Put me on the kitchen floor crying like a little baby. Oddly enough, drank 2 cool glasses of water and sat by an open back door for cool air and once I cooled down the pain went from a literal 10 to about a 4. It will match my grandmothers finger in a lawn mower at 82 when she did it, and my dad's in a snow blower, except he put his finger in a snowball and put the snowball in his pocket. finished snowblowing my grandmother's driveway and then I took him to hospital and they reattached. Not stoopid folks, just silly farmers from Pennsylvania. Ok , maybe a little stoopid. I will also post pics of board once complete. Quote Link to comment Share on other sites More sharing options...
Gecko Posted November 2, 2006 Report Share Posted November 2, 2006 Chubz, I truely do understand 30 minutes after I glued it together the adrenaline and beer wore off I went to the ER. They looked at what I had done and after some Xrays they said there was really nothing they could do. The good thing for me was that the cut was straight into the tip dead center between the nail and the print and the blade jumped when it hit bone. So didn't have a lot of additional damage but yeah it hurt alot for a long time. Get well soon Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.