110/220V
-
Posts
374 -
Joined
-
Last visited
Content Type
Blogs
Gallery
Downloads
Store
Events
Profiles
Forums
Posts posted by 110/220V
-
-
CATEK OS1 traditional bale///long plate
Photos below
Used CATEK OS1 10mm LONG PLATE, TRADITIONAL bale (not the intec) and qty (1) very very good discset and qty (1) well use discset
http://i52.tinypic.com/120mckg.jpg
http://i51.tinypic.com/16izmlv.jpg
http://i56.tinypic.com/316nv9y.jpg
http://i53.tinypic.com/250qccp.jpg
http://i56.tinypic.com/2znux6s.jpg
price-reduce to 150USD for the bales with the nice discset and 130 for the bales with the worn discset.
I will ship the automotive (thicker) hex for the kingpin since I can only find one original pan head kingpin. The auto grade will not strip like the pan heads...I am also including stainless n2 philip for one of the bales as shown (these are same thread and can be acquired at any hardware)...a bit faster than the replacement from Catek
these are nice bindings. Original Catek allen-head screw available for the heel and toepieces ...but regular stainless bolts are recommended
I also have MINT OS2 disc and pieces for sale...(no photo because they are the exact same as you would get from CATEK). Never used the OS2 discset, but you can pm a message for interest...ok?
...There is black marker reference colored in the wellused discs photo 3-5...(holes were colored with marker)
the wellused discs also have something but I dont know what you will call it; the kingpin was not too tight and there was a shift three indices wide?
PayPal preference as 'gift' to avoid fees
Please feel welcome to pm a phone or request for further clarity
-
:^\
):^O
we will not stand by to admit any forum that accept our membership...
YOU do as you like
110
-
a damn shame for the duck stance, no place in the snowsport. You can argue and rationalise if you choose, but that argument is non fujnctional and in and out my ear like water off duck a55...
-
kieran that is a bad situation that will only get better, but I would have more concern and focus on how to untrain or prevent the hand plant in the future..that would be my constant concern from the begining, yea?
so what did your body do, how did it move? what was the curse or skillset pattern that I would consider? ok for experience, I had the same issue..without your exoskeleton enforcement...but it took some time before I would really have clarity with what my anatomy was doing, and then to correct with drill etc.
but this is something you have to do on your own, no advice makes sense often without the clarity of exam..this is the fun to look forward to while you get well, and you can find more eBay for us while you are off the snow!
:^)
-
use pamper or cloth for the baby dampering, ok?
-
...yes because this is the reality for the modern resort. It is disneyland of fun and privilege...a big playground, but beware!! you are very lucky she is not hurt, but each run at any resort is a spin at the dice, yea? Too bad there is no concern for basic control to ski on your equipment of choice, however.
-
do not covet your beautiful expense board...yes because it is only a matter of time, yea?
but this is a friendly reminder on a friendly internet forum...you are welcome here, and some post are very interesting and helpful and fun but remember that real people ((not just in your country) regard you as person and not as a reflection of the fancy thing you wear or do or own.
-
:-\
:-O sell that board fast
-
you ask Graham about the hardboot and the BX...but you also adjust to the type of course..
Olympic and larger FIS =good for hard as they tend to be wide and flat
XGame = you are asking for trouble with hardboot
SPIA was fine with hard or soft but best if you had sheer willpower to go fast
ASA= the courses change with division, OPEN class will have steeper pitch for the sake of steep rather than flow
besides...you introduce too much failure point with all your gadget...with any boot you keep in mind you only have about 18 inch suspension if you are fit...if you constrict the foot from extension (ankle), you are asking for trouble when you buck off a silly transition that is not designed for speed
your choice to crush your knee or ankle or a55, sir
-
:-\
ps...that is some carbon footprint, yea? all for the sake of 10dollars of bean and c heese
-
nek you do not miss much else than crowds of money, big car with slapping chain and sassy American kids chastise the parent...but that crowd has migrated south with smoke from their a55 as soon as the road was cleared
and 10USD tube of bean and fake cheese? a simple 2dollar nonfood like hotdog could make so much more revenue for resort concession
-
-
@ 100USD lift ticket in Mammoth Lakes...why bother?
there is the new demographic mindset...also related witness from the local food cat...and black pass club
most program oriented to tourist who clamor to these amenities, modalities et that cater to elitist pov. You have volunteer situation that you choose..Just teach to their model or walk away, yea? but I guarantee you must not make a choice you will later regret..
-
?
so, next time you take blue pill?
-
shame for maine...you are not permitted to this sale. You should have bought this eight month ago.
How long should Leal wait for you to decide?
-
...yes because you miss this one?
http://cgi.ebay.com/Vintage-Santa-Cruz-snowboard-80s-90s-Zeta-model-160-/320627477672#ht_500wt_988
it is nice to dream.
-
the thread is just fine as it stands. yes, because we assume the corporate resort has hired and retained plenty of expertise on the safety of the particular chair within the parameter of daily protocol and proceedure. why shed a tears when there is potential negligence at stake? do you shed tears for the hour employee who endure the tourists every day of his shift for the mere sake of customer/product service and corporate profit?
so we do not cry foul at the big friendly resort, but there is reason for public examination of culpability on this large scale...lives are affected who have relied upon reasonable care and caution in maintaining service and running the machine, unless you are a lawyer for the resort you may oblige yourself to indulge some amount of public opinion on this accident..you do not need to read you may move on if the thread offends.
this is part of the skiing, thank you jack for the post. all on the lift are in our thoughts...any of us could have been on this lift, so we acknowledge your concern and empathize with your experience.
110
-
I will stand in your queue...if I can paint it green
110
-
it is always a delight to browse what kieran has found for us! thank you
This thread should be called KIERANS PICK
-
ha..all of the thousands of dollars to innovation within reason is great for snowboard...and it is better try this direction than absurd choices (edge less snowboard with slider insertpattern?)...
develop the sport/equipment and hopefully riders will someday develop the motivation toward healthy lifestyle and keen athleticism to make the best use of the TOP product innovation..yea?
There was a meetiing at IsosportAUT ( this season Skiing industry reintroduces new ski with steep noses)...why? for ease of turning? To suit whom, the recreational skier/? Perhaps I am wrong to question the source of revenue to the industry..but i love the elite-level snowsports!
-
We talk about this before...when we have a problem with damage...
but I think the problem is the solid, binding construct, or user error...because the boards do not seem suited to the focus of severe instantaneous flatspot caused by the rigid binding...
there is always the cry for manufacture defect...because the recommended stance and setback etc is always the cry...but few carbonfiber/titan construct were designed to accommodate these CNC bindings, some day manufacturers will caveat the warranty with this clause.
I think manufacturer designs his and her board for plastic bindung, not NASA grade metals or alloy...but I could ask a manufacturer if his construct will stand leverage created by bomber or catek or CNC heavyduty binding? Of course, I could always be wrong.
It seems to me that the company should not allow frivolity for claims...everyone must take responsibility for the choices they will make. It is a dangerous sport, yea? 110
-
:-|
:^\
:^o P W N E D
:-|
-
&^O I like the old animate blue bee gif best...yes, because there was a rider making turns and then he turns into a blur bee and honeycombs!
-110
-
not yet...but this will be a post many are waiting for, yea?
perhaps it will arrive in carbongreen?
CATEK OS1 traditional bale///long plate
in For Sale
Posted
Hi this is a link to the os2 parts;
http://i53.tinypic.com/mszz9k.png
now -what we have is a complete OS1 set for sal. There is the automotive kingpins that will not strip like the catekbolts...and a wrench included.
In addition to the complete OS1, I have os2 discset and parts.
now -the pic above is from catek site describe the os2; I have ALL the parts in the pic with green standard elastomer! But I do not have a rectanglplate (the red part in phot) that is emboss with "CATEK OS2" but my plate from catek with the OS1 is the same manufacture.
In addition, I have all other part for os2 except the redplate in the photo above
If you want OS1 set with very good discset, buy this with PayPal at the low price. However if you want a os2emboss, you will have to go to catek.
If you want my os2 disc with the parts and no redplate as photo, the price is 65USD
If you want to purchase both OS1 set and os2 discset, the price is either the 215 for very good OS1 discset(150+65), or 195 for welluse OS1 discset(130+65) and I keep the very good OS1 discset...ok?
For any purchase, please use the PayPal with gift so fees do not compound the purchase. USPS has a flat-offer box that will hold everything and ship in 48US for additional 7USD. I can ship these fast with some notice.
If you choose a DHL or FedEx shipping, you must forward your shipping address.
wow that is information, so if there is interest or further clarification needed, please continue to pm, ok?
thank you