tcross.au

i have a mate that uses one of those garmin fortreks on his sailboat, works well, great for distance averages over a course etc. and greatly accurate

We are ment to have a dump next week so hopefully our season picks up

well i'll probably see you up there, my riding aint great so you could spot me easily, or look for the only hardbooter on the mountain, if not then i might see you at falls. hopefully it snows by then looking foward to getting back on the snow

not sure where he comes from exactly, but i can ask i think he is interstate. EDIT: he is from syd so dont think so 2 weeks till hotham staying 1st till 9th Probably will take a trip on that helicopter service over to falls so you might see me up there, just look for gold SL board and blue fire boots and thats me. just depends on the snow, if it's any good i'll take my board but if not then i'll ski but could still meet up depending on who im with. im at buller next week hopefully because i need to get some gear that i left there over summer for hotham but dont know about boarding as there is next to no snow as you can see below for those of you who are overseas, that board i made with the trail map on it, this is the south side of buller looking down from the summit towards the flat part DIAL UP WARNING large one of above http://shogun.smugmug.com/photos/76163622-O.jpg

board taken

there is an Volkl RT that i know will not cost much to buy, little secret, if you are a beginner i can give you a link that will allow you to buy this. I dont need it but will buy it if no one new wants as it will be put to use by me sometimes. so if you are from aus and want to start in hardbooting for alot under 300. then here is your chance be quick though have to do it tonight or tomorrow morning. No pros on this one just beginners as i want to help them progress

I do everything excluding base grindings, so waxing, structuring, ptex and edging

3rd paragraph says Total compensation for selected works will be one snowboard valued up to $600 with your artwork on it. Selected submissions will become the sole p roperty of Donek Snowboards. The deadline for submissions is July 31, 2006.

ice board, you'd want it to carve well

could add this one in the new donek model, The STD

sorry had to do this, but here is a uric acid board, trippy colours and what not just overlay it with the brand C5H4N4O3 Just the chemical equation for uric acid, 5 carbons 3 Nitrogens 4 hydrogens and 3 oxygens

If I were to get a donek for my next board I would actually contemplate it but think i would settle for something else because it would look out of place if i took an overseas trip or even to another mountain in AUS Buller is a very interesting set-up, 2 sides to the mountain north and south with a main feeder beginner run down the centre, those yellow lines in the middle of the flat part interconnect and you get the two sides. Vertical Drop is 643 ft Skiable area is 445 Acres, so not all that much room to move. And with an average snowfall of 270 something cm it isn’t worth the trips people take from overseas to get here. I've shown you guys some of my attempts anyone have something else to look at?

i should place the idea to buller sports for thier rental department and see what happens, or could just ask them if i would be allowed to use it for a board? but doubt as that would cost too much to get rights. I rekon you'd cop some flak from having a board that looks like a trail map though, fairly weird thing to have. just a note: buller sports is the buller lift company retail section

thanks i was thinking along the lines of what sean origionaly said that you can print photographic images, so what would be better then just getting the board and boots, then no one would just think you are self centered if you had a pic of your self, just the boots and the blue snow above works atleast for me, i'd love it on my board.

heres a couple more to keep you going, they are fairly bad but atleast im attempting, any guidence would be appreciated Definetly against copyright laws, but still would be good to have just for a laugh. Made very poorly not caring about vectors etc. atleast you can sort of see what my mountain looks like. north and south side EDIT: add more info on buller board

Sean by any chance was that my designs that have been entered?, i've got a couple more that i can send in

you think thats sad, atleast they have natural snow, go about 200km south and look we have ski run almost

at least there is a dusting at thredbo, look at buller, atleast 1 good thing comes from a late start, the air cools the ground so you dont need as much snow to create a platform for the rest of the season

whats wrong with the chilli 195? past it's used by date?

.....then watching the other side of the world count down till opening day. Problem is we dont have snow yet though and with 8 days 23 hours 55 min to go.

you could always texture the topsheet and run this across it to have an atomic race board.

it would be sweet in a hologram, but the cost of making it would be seriously high you'd think

I had a go, along the lines of the atomic speed skin topsheet http://i4.tinypic.com/zwagw6.gif

just go file open and choose the PDF file, i use both illustrator and photoshop, the first is best for straight lines the 2nd for curves. Make sure you dont overwrite the pdf file as if you are making other designs you will lose template. Create a new layer and start your design, adding layers fo diffrent parts

as any one got those templates from the prior contest? my computer broke down so i lost them