eaglez

Let me know if esnipe works for you on that one.... D.

SOLD! Thanks Holly!

Bindings Are SOLD!! This is a complete set of Burton Race Plate Bindings. As you can see in the pix, everything that came in the box is included. That includes the original box and documentation (if you care about such things!) Both 3 and 4 hole discs and cant plate with both discs as well are included. This set has seen very little use and is in as new condition. My ebay id is q107 if you want to check my extensive feedback selling online. There seems to be more of a market here instead of ebay for this stuff. I only take paypal. Make me an intelligent OFFER for the set. First paid acceptable offer gets them. Shipping will be $20.00 anywhere in North America. You can email me directly at eaglez@sympatico.ca Darren

Never been to one of these events. What sort of day is it? Are there specific events at different times? Or just a great opportunity to get together with like minded individuals who like to rip it up? Darren

If you take Scenic Caves Rd (not sure if that is the name but the caves are on it) all the way up to the top of the "mountain" then take your first right, it is right there. You are about 75m from the top of the chair. You can get to any part of Blue from their. Normally you can just ride/slide in. I wear either a Green/grey Descente DNA jacket or a blue Swiss Army jacket. D.

oh ya, usually park at the top of the hill by the chair at the GrandGeorgian (never crowded) and ride anywhere from the middle to the south areas. D.

I am usually riding my 165 MOMO F1 (Ferrari/Momo F1 car graphics) or my Oxygen Proton GS 185. I have a grey Leedom Helmet. But after next week I retire the MOMO and start riding the 175 Prior WCR Maroon topsheet board I bought from Aimee a couple of day ago. Will email you when I am going out. D.

I am usually at Blue @ night. Sometimes weekday nights, sometimes weekend nights. Also, I will call MSLM and inquire about Imo. Tx

I would like to take this carving thing to the next level. Been doing this for 6 years and never had a proper instruction in advanced carving. I believe in constant improvment and I need coaching to get better than I am now. I have been reading posts regarding different techniques but good old fashioned monkey-see monkey-do tactics probably work better. Anyone know anyone who fits the bill? Darren

I misread, I need a 29. D.

How old are the boots? Are they orange or the red that is shown on BOL? Do you take paypal? I am near toronto, will you ship up here? Also, just got an email from Shaggy confirming my order for a MADD 170 F3 CB. This will be my first MADD and I am pumped!! Thanks Darren :D

Sorry, This should not have been in the CLASSIFIED Section. Darren

Hey All, Sorry, I posted this in the CLASSIFIED section by accident. My Specs: 225 pounds, 6'1", size 29.5 Raichle - reasonably aggressive carver My Boards: MOMO Design 165 (ya, I don't know who was the manufacturer is either!) - the board is very soft though Oxygen Proton 185 GS My Bindings: TD1 SI's My surroundings: I live in Barrie, just north of Toronto, so none of your west coast length resorts or your west coast powder. We have Intrawest Junior at Blue Mountain! I want to get into a 168 to 174 stiffer board, that will take my weight and not fold under the pressure of a deep trench. I did actually break one MOMO board a couple of years ago, they replaced it under warranty but with the same soft board. I was looking at the Prior WCB and 4WD and the Volkl RT in various sizes at the ONLY local shop that sells carving hardware. They also had a NEW Volkl RT 174 from a couple of years ago. (the one with the flaming sabre tooth skeleton) Since Coiler is not inventoried anywhere around here I can't look at them in the flesh. There is also no where to demo the products in the area either. I would like to move to one of these Porsche boards but I need some input from the masses that consider this sport a religion. I call it an insanely addictive hobby at this point, but am open to converting. Any and all opinions are welcome and appreciated. Darren

Hey All, My Specs: 225 pounds, 6'1", size 29.5 Raichle - reasonably aggressive carver My Boards: MOMO Design 165 (ya, I don't know who was the manufacturer is either!) - the board is very soft though Oxygen Proton 185 GS My Bindings: TD1 SI's My surroundings: I live in Barrie, just north of Toronto, so none of your west coast length resorts or your west coast powder. We have Intrawest Junior at Blue Mountain! I want to get into a 168 to 174 stiffer board, that will take my weight and not fold under the pressure of a deep trench. I did actually break one MOMO board a couple of years ago, they replaced it under warranty but with the same soft board. I was looking at the Prior WCB and 4WD and the Volkl RT in various sizes at the ONLY local shop that sells carving hardware. They also had a NEW Volkl RT 174 from a couple of years ago. (the one with the flaming sabre tooth skeleton) Since Coiler is not inventoried anywhere around here I can't look at them in the flesh. There is also no where to demo the products in the area either. I would like to move to one of these Porsche boards but I need some input from the masses that consider this sport a religion. I call it an insanely addictive hobby at this point, but am open to converting. Any and all opinions are welcome and appreciated. Darren

Do you still have the RENNTIGER 163. How much and how do you want payment, paypal is good for me. Thanks Darren