Sam B

Thanks for looking but the Hangle Plates Sold!

The Hangle Plates are still for sale! Make me an offer! I need to sell!

I have one pair of Hangle Plates for sale. These are an extra set that came off my kessler. I was very pleased with them but I have one too many sets and need to sell a pair. They are in good condition and were used very little. You will see extra holes on the plates where I mounted a set of F2 toe and heel pieces directly to the plate however, the factory 4 pack holes are still intact and work fine. I have the white metal plates that run alone the edges of the board but they are not in good shape as I removed them from the original board buy they could be reused. You are welcome to them if you want them. I am asking $375.00 and I will accept paypal. You are responsible for shipping costs and I will only ship in the US.

Over the past few year our racers have had have had a few collisions with gates, other riders etc... and damaged the noses of their Kesslers. I am specifically looking for epoxy recomendations when re-gluing the dmaged layers back together!

e-mail sent on the 156 and 174 GS.

Can you give specs on the new 185? Such as: What body weight it was made for What the waist width is How much taper Does it have the KST nose technology Does it have inserts for hangle plates

Bindings are Sold!

I have a pair of CATEK OS1 step in bindings for sale. They are in good condition. I would rate them an 8.5 out of 10. They are the long plates that will fit all boot sizes. Taking any reasonable offers!

I had Hansjuerg make the board for my weight range and foot size. I asked him to build me what the WC riders are on. I have a 162 SL and 182 GS both have hangle plates and kST technology. I run F2 titanium race plates. both the boards are a little wider than the standard shapes.

Thanks for the info! That makes more sence to me. Any word on stance info. I hear most of the world cup guys are centering their rear foot 50cm off the tail then setting their stance width from there!

Hey Boardy thanks for the info! Just so I have this straight, when I lay the board flat or put a straight edge on top of the edge I see the contact point is close to the second S in KESSLER. In you opinon would that be correct? I would be detuning the board much further back than I am used to but, that seems to be part of the technology!

Just wondering if anone out there has any opinions on how far they detune the nose and tail of the Kesslers with the KST technology. Seems to me that the contact point on my kesslers is much farther back (towards the waist of the board) than any other board I have ridden.

I was wondering if anyone knows if all the F2 race Titanium bindings have a Titanal Base Plate? I have two sets. One is an 04/05 model that has a polished base plate (Almost chrome looking). The other set is an 06/07 model that has a matt finished base plate. I am wondering if the 06/07 model is Titanal and the 04/05 model is just polished 6061 aluminum. Furthermore has anyone ridden both models and noticed any difference between the two?

Can you tell me what weight range the 162 was build for? Which plate does this board have on it? Is it the Vist plate system? Could you also send me a picture? And finally how much do you want for it?

Just an update, the two suspension kits and both of the TD2s have sold! I still have the step in retrofit kit for the TD2s, 2 sets of 10mm lifters and the set of CATEK bindings!

The CATEKs are about 3 seasons old and they were riden for two season. They are in good shape. I do not have the intec heel pieces that screw onto the heel of the boot but, you can buy them on the bomber store.

I just posted the bindings for sale on a new thread. There are details and pictures there. http://www.bomberonline.com/VBulletin/showthread.php?t=17173 Thanks, Sam

I have the following bindings for sale: I have the following available for sale: 1 Pair of CATEK Olympic Long Step In ($185) 2 Pair of Bomber TD2 bindings ($185 ea) - Both pair are traditional clip in style and I have one step in kit ($50) if you are interested. They both have 3 degree cant lift disks and I have one extra 6 degree cant lift disk ($10) 2 pair of Bomber TD2 Suspension kits ($30) 2 pair of 10 mm lifters ($20) Email me if you have any questions or want pictures sent directly to you! Thanks for looking! Sam

Hello Julian, I don't have the Coiler 166 anymore. Sorry, but my inventory is down to a pair of CATEKS and a few pair of bomber bindings. If you need any bindings let me know! Thanks Sam

Is the 07 162 still for sale? What weight rider was it built for?

I have a stack of Donek Pilots that I have purchased for my race team with no problems! I also have owned three Donek custom's myself, two GS and one SL. The first GS board rode well and I sold it to my training partner who I coach with. I rode the board for one year and sold it. My training partner rode if for half a season and all the inserts started to pull out! Talked to sean and he would not fix the board, replace the board or give me a new one at cost. After all the boards I purchased (7 - in total) I was very confused that I was not treated better. I was also confused that I had riden three Donek custom's very hard weighing 200+ lbs and one of them failed that was relitively new and the others are still riding fine! I am sure that many of the small alpine manufacturers work on low proffit margins and they must have a strict line when it comes to just giving out free product. You are most definitely out of luck when it comes to getting anything free as far as a replacement goes. I have slowly started to convert my riders over to other products as to not run into this issue in the future. Good luck!

These bindings will work with the intec step in heels sold on Bomberonline. This is the way to go if you are just carving as they are very easy to get in and out of! you can also convert these bindings to work with ski boots by purchasing the conversion kit from CATEK's website! Let me know if you are interested. They are boxed up and ready to ship. All I need is a mailing address and payment and they can be sent ou this week yet! As I mentioned before I will take paypal for the purchase.

The Coiler boards are both sold (Finally). Anyway the CATEK Binding are still for sale for $150 if anyone is interested!

The CATEKs are Long Plates. Here is the description from CATEKs website. "Short | Long Plates The Short Plate is ideal for smaller boot sizes (<10US) and lighter (<180lbs) riders. The 3/8" thickness provides a more forgiving ride than the long plate. The Long Plate accepts all boot sizes, and its 1/2" thickness provides the most powerful ride on the market. Riders weighing more than 180lbs or with a boot size greater than 10US must use the long plate."

I sympathise with your anger towards people that don't send a check after they ask you to hold a board and you box it up put a shipping label with their name on it and let it sit for two weeks! Anyway, thanks to tahoetrencher I have sold the GS board but the red SL board (Awsome board by the way) is still for sale. The bindings which I am now reducing my price to $150.00 are also still for sale.