TD2 Suspension Kit - Anyone Find Longer Hex Screws?

[Sinecure]

Has anyone sourced hex-head screws in the correct length/pitch/size for the TD2s with the suspension kit? Its a pain to carry a big Philips screwdriver in my bag, along with a hex t-wrench. It eliminated one of the cool features of Bomber products - one wrench to rule them all.

And along these lines, any great tips on ways to ease alignment/set up of the TD2s when you are running the suspension kit? I find it challenging to get the two e-rings to line up nicely, plus its sometimes difficult to get the center disks/holes lined up (exacerbated by the fact that the soft e-rings cling very well both to the center disk and to the board). Maybe Fin will consider creating a small notch/nub in the two center pieces so they slot together/mate up a bit better in the future.

[D-Sub]

http://www.mcmaster.com/

looked there?

[Sinecure]

Hmmm. Looks like they have them. Are these the right specs for what we need? 1mm pitch? Is the head height low enough to clear?

If yes on all counts, I'll order some up and no doubt have plenty of spares.

Part Number: 91292A137 $3.98 per Pack of 25

Head Style Standard

Material Type Stainless Steel

Stainless Steel Type 18-8 Stainless Steel

Drive Style Hex Socket

Thread Size M6

Metric Thread Pitch 1 mm

Length 20 mm

Hex Key Size 5 mm

Thread Style Right Handed

Thread Length Fully Threaded

Head Diameter 10 mm

Head Height 6 mm

Rockwell Hardness Not Rated

Minimum Tensile Strength 101,000 psi

Thread Fit Class 6g

Specifications Met Deutsche Industrie Normen (DIN)

DIN Specification DIN 912-A2