fallen
-
Posts
19 -
Joined
-
Last visited
-
Days Won
1
Content Type
Blogs
Gallery
Downloads
Store
Events
Profiles
Forums
Posts posted by fallen
-
-
My 3-in-1 jacket/liner/vest that I've used for 20+ years has disintegrated. RIP. So I've been searching the Interwebs for my next jacket. But all "highly recommended" and "best in class" jackets do not look practical at all. What I liked about my deceased shell top was the strategic placement of pockets. Left chest I had a radio pocket (i.e. antenna hole and no need to take gloves off to talk), right chest another easy access pocket. Side pockets, inner pockets, etc. Nothing interfered with the movement, etc. If it got cold I added the liner. If it got really cold I added the vest on top. If I didn't need the hood, it rolled up into the collar. And so on. It was the best thing ever.
So what makes a carving jacket good for you? What do you have and love? Or hate. -
Hey folks,
Not sure how strange this topic/question is, but here goes.
So back in the 90's I rocked the Leedom full helmet (photo attached). I loved it because the top of the helmet was high enough that it did not push my goggles down, allowing my big nose to breathe nicely. The helmet died due to much use (RIP). Went out and got a typical ski helmet that fits nicely - without the goggles. But it pushes the goggles down and squeezes my nose to the point of extreme uncomfort.
So the question to this community is this. Is there a vendor that makes helmet/goggle combo that fits nicely without the goggles getting shoved down? Or are the low profile goggles?
-
A little background...
I rode a LOT all through the 90's and through 2002ish. Was very decent at it. Had all sorts of boards - F2, Sword, Oxygen, etc. Life happens (i.e. family, work, etc.) so I stopped.I'm ready to get back to it, however, I'm a lot older with multiple knee surgeries, constant knee pain, etc. Since almost everyone I go to the mountains with is a skier, I thought I should consider an all-mountain board. Something I can carve the groomers with, yet still be comfy in crud, powder and such. I am 6 feet tall and 180 pounds. Still going to rock my hard boots with step-ins. What board brands, size and models should I be looking at please?
Thank you in advance.
-
Glad it all worked out for you!!
Thanks Bryan! :)
-
Post these links into translate.google.com:
http://www.extremecarving.com/forum/viewtopic.php?t=1034&postdays=0&postorder=asc&start=0
Newer/more hardcore modifications: http://www.extremecarving.com/forum/viewtopic.php?t=1034&postdays=0&postorder=asc&start=279
If modifications like that scare you, get some new Deeluxe boots instead.
Definitely not mucking with the boots. With family in tow, I've become a "very very recreational, few times per season" carver.
-
Thanks all. I'll stick with step-in's for now. My form sux anyway. :)
-
Thanks for all the replies folks. Somehow my Bomber email notifications where going into spam.
In any case, I did get needed screws in time. Fella who originally sold me the bindings came through by shipping and extra via 2-day delivery.
-
I own a set of Head Stratus Pro's, but find them to stiff for my riding ability. I'm older now, don't ride as often, or as aggressive as I used to. I find that my shins are sore/bruised after a day of riding.
So the question is - is there something that I can do to the Head's to make them more comfy for "recreational" or casual carving? Or should I consider moving to a softer boot like Deeluxe Track 225's?
Cheers!
-
I picked up a user Sword and would like to use TD3 Step-in bindings. However, the manufacturer states that step-in bindings are not recommended. Has anyone had any experience with the Sword + step-in vs. Sword and regular plate bindings? Any real world experience on this matter please?
-
I am missing a M6x20 screw for so that I can attach a TD3 center plate to the board. All the staff is out for the convention and I need this 1 bolt ASAP. Can anyone help please? I'm happy to pay for fast shipping + part.
Thanks!
-
I just got another board and need to put some binding on it. I my other board has TD3 Standards. If anyone wants to part with a pair, please let me know.
-
I'm riding Head Pro Stratus boots. They're 2 years old - used twice. :)
I might not be buying new equipment this yes (unless it goes on sale). But next year I'm planning on getting step-ins.
-
Thanks for the advice everyone. I think the first think I will do is tighten the boot strap, even though I think I wear the boots tight already, then move my feet close together.
Just in case, here are images of the binding as I currently have them:
-
When I board, my right shin gets bruised right where the boot ends. I ride regular, and this always happen. Clearly I am bending my right leg in a way that puts a lot of pressure where my right shin hits the top of the boot. The question is - what can I do to relieve that point of pressure.
That said, I am not a technical rider. I have no idea what angles are set set on the board. The only thing that I have tried was to loosen up the strap. Can anyone suggest a few things to try?
Thanks in advance.
-
Good reasons :) but I'm looking for more tech explanations. For example, is the failure rate more frequent in step-ins or are they just as reliable under hard carving conditions as the standards?
What about powder/tree riding? Is there a good reason to have one type over the other?
I'm sure they're nice to have and I've actually 'thought' about them a few times but I've never bothered pulling the trigger on step-ins because:1. even though I'm carrying a little extra weight, I can still reach the toe clip with ease.
2. I'm usually riding with soft-booters and have to stand around waiting on them to strap in anyway.
3. I can't even spell bugdet, let along justify spending money that could just as easily go towards another lift ticket
-
Trying to decide between TD3 Standards or Step-Ins. I would love to hear pros and cons from those who have experience with both.
Cheers!
-
Done and have a good time this weekend
Thanks man!
-
Mine broke so I need to get some boots to finish the season with. Anyone willing to sell size 27 boots (My MONDO size is 26.9) please let me know.
After being dormant for a bunch of years, what board should I be buying?
in All Mountain Hardbooting
Posted
Thank you to those who replied. Time was of the essence when I posted, so after quick research I decided to go with a custom Prior 4wd. I was going to try a Donek board, but they told me they don't have time for a consultation on the phone and told me to just order online. Prior spend a ton of time on the phone with me, and we decided on a 4wd. There were some issues with UPS and Prior was on top of it, making sure I get my board before I went off on my trip. I went with a shorted board (169) vs what I was used to riding 15+ years ago (172 and longer).
Love the board and love the human support the company provides. I am thinking of getting another board made for me next season and I'm going with them, even if there are better options. Why? Customer service is why. In a niche market like this I really appreciate the ability to speak with someone who cares.