Jump to content

FilipinoFlyer

Member
  • Posts

    52
  • Joined

  • Last visited

Posts posted by FilipinoFlyer

  1. Oxygen Proton GS 172

    Second owner. Not sure of year manufactured. Red/Black topsheet (see pic). I also picked this up last summer to potentially use to play around on hill without getting my SGs messed up. Took it out maybe 4-5 times. Still pretty good handling for it's year and mileage. Naturally, near the binding holes, you'll see the various marks from different bindings and plates used on it over the years. Last year, I rode on it using a Apex plate.

    The base is decent. I didn't have to repair or regrind the base at all. Good edges still left. Coated with Toko Base Prep/storage wax.

    This is a good ride for someone that wants to try our sport out or for someone who doesn't want to mash up their race board before the season starts. Your choice, but I'm going to list it for the following:

    Price INCLUDING shipping: $90USD for CAN and the lower 48. For AK/HI (for Mauna Kea) and EU, $110USD shipped.

    post-7584-141842371173_thumb.jpg

    post-7584-141842371165_thumb.jpg

  2. 2 Original BOOSTER Straps for Sale! (Lowered Price)

    Model: RACER/EXPERT- Three semi-elastic bands. Best for expert or aggressive skiers weighing more than 140lbs

    Purchased last year (November 2011) to eliminate 'shin bang' and better boot response on hill. I Purchased new UPZ for next season and will not need these. Price range for each strap online is between $27-$37USD. These are in great condition, no tears, no rips. Perfect to replace your old worn out ones.

    Selling for $40USD for both INCLUDING shipping to CAN/48US. Price INCLUDING Shipping to AK/HI or EU will be $50USD

    Lowering price to $20 USD INCLUDING SHIPPING to CAN/48US. EU/Others = $30 USD SHIPPED

    post-7584-141842371157_thumb.jpg

  3. Pair of older Rossignol freecarve/alpine bindings which I just took off a slalom board that I picked up recently.

    Not only do I prefer more rigid bindings (i.e. F2 Race Ti's) but, these will not fit my boot (M24.5) as they are still too large even when adjusted. I'm assuming that they will fit M26+. Complete with washers and OEM screws and the 4x4 plates. Bails still look good and no cracks or 'warpage' on the ABS.

    **Note pictures: These have a molded (integrated) interior cant to the stance, probably a 2 degree+.

    Paypal and shipping via USPS. $35US including shipping to US or CAN.

    post-7584-14184236404_thumb.jpg

    post-7584-141842364035_thumb.jpg

  4. my apologies for not getting back to some of you...

    I just got an email notification from the last poster. For some reason it was not getting pushed to my phone.

    Nevertheless, I have one interested buyer pending...i will update as needed.

    This is a good GS board for a rider lighter around 140 and below. A great slalom board for more experienced and heavier riders.

  5. I picked this board up earlier this summer thinking that I was going to tool around with this for fun. I picked it up from a rider from Montana that had it pretty much stored in his closet since he was racing on his 158RT.

    This Renn Tiger 163SL is in very good condition considering that it's from the 01/02 model year. The Renn Tiger has a milled wood core, so the camber is manufactured and not pressed. This board has a ton of camber and since the core is milled it will last a very, very long time.

    When I received this back 2 weeks ago, slight base oxidation, but then I took a horsehair and stiffer brushes to work it out, crayon-waxed with Swix Warm Flouro and warm ironed, then hot boxed for 6 hours to infuse the wax. Never had the chance to mount and ride, as I'll be using other boards this season. From initial feel, camber is still very good and very springy (although these RTs are known for it). Top sheet still has the original QC and 3D Side Cut stickers on it. It just doesn't look like it was used very much. Base and edges are very good with much life left.

    Asking $175 + $30 for shipping to US/CAN

    http://www.flickr.com/photos/61207748@N05/sets/72157627709538914/

    Pics posted.

  6. Yup - yup.

    I'm back in it. I'm planning on racing at a few FIS level and maybe the NorAm Finals this year. I can't stay away. I'll also be "rep"-ing a board company for a friend of mine (more details to follow) starting this winter. So Tahoe will be perfect for that.

    And yes, I moved that fam up to Reno (again). Let's ride this winter for sure. I'm planning on being at Copper on Nov 16-18th so - let's plan of having lunch and taking some turns.

    Talk soon - Filipino Flyer

×
×
  • Create New...