ShakeNBake Posted October 9, 2022 Report Share Posted October 9, 2022 I am super out of the loop on gear, after 30 year break, and I have always ridden with cant plates or canted bindings on both my soft and hard boot boards. Does anyone make cant plates that will work with my board and bindings? Thanks, Mike C Quote Link to comment Share on other sites More sharing options...
philw Posted October 10, 2022 Report Share Posted October 10, 2022 Don't really understand the question. My Hometown Hero has a couple of F2 race bindings on it and I cant those the same on there as on any other board. The binding just bolts to the board; the board doesn't care about the cant. Quote Link to comment Share on other sites More sharing options...
TVR Posted October 10, 2022 Report Share Posted October 10, 2022 12 minutes ago, philw said: Don't really understand the question. I agree.. can you please put the question another way? F2 / SG bindings do the CANT under the heel and tow... TD series / old burton do the CANT under the binding itself and rotates for direction with set degree angle Catec's use screws to set angle for CANTs Many others as well.... 15 hours ago, ShakeNBake said: Does anyone make cant plates that will work with my board and bindings? We need more information on your bindings and what you are looking to do here.... Quote Link to comment Share on other sites More sharing options...
ShakeNBake Posted October 10, 2022 Author Report Share Posted October 10, 2022 My Burton Asym Air had circular discs that went between my bindings and the board and canted towards the middle of the board for a more natural (to me) stance. My cant discs do not work with Burton's current binding hole pattern and I was wondering if someone made a cant plate/disc that would work with my step on bindings and Burton board? I know I can get plate bindings that have cant built in, but I was looking for something for my step ons. Quote Link to comment Share on other sites More sharing options...
TVR Posted October 10, 2022 Report Share Posted October 10, 2022 I am familiar with those, and thanks for the updated info. I am not aware of newer CANTs for the newer style, but I imagine a 3D printer could make you up something easy enough. Do you know anyone with a 3D printer? The bolts would need to be longer as 3D material would not allow for bolting into that, so the bolts would go through like the original burton giant black pucks. I also suspect aluminum would be expensive and not sure you would want the weight... so 3D might be a good start. Hope this was helpful? Quote Link to comment Share on other sites More sharing options...
SunSurfer Posted October 10, 2022 Report Share Posted October 10, 2022 This explains why inward canting can feel more natural with lower binding angles, but also how the need for cant and lift changes as your angles change. It also has a reference to a thread on 3d printing binding cants, although for a different model binding. 1 Quote Link to comment Share on other sites More sharing options...
Mr.E Posted October 10, 2022 Report Share Posted October 10, 2022 (edited) Canting plates are not really a thing anymore, though some bindings have a few degrees built in, and you can do foam under the boot (probably won't work with step ons). You might call Donek to see if they have or can make a set of their BX plates canted. Otherwise it's pretty well a DIY project these days (check out horseshoe wedge pads if they are large enough). Edited October 10, 2022 by Mr.E Quote Link to comment Share on other sites More sharing options...
ShakeNBake Posted October 10, 2022 Author Report Share Posted October 10, 2022 Thanks for all the info. It looks like a DIY project. It might be time to ditch the step ons and soft boots except for my powder board. Quote Link to comment Share on other sites More sharing options...
Tim W Posted October 14, 2022 Report Share Posted October 14, 2022 (edited) The Bomber power plates will allow a variety of cants with different can't disks. The plate attaches to the Bomber can't disks and your bindings attach to the plates. I have a set if you want to demo them sometime. Edited October 14, 2022 by Tim W updated location Quote Link to comment Share on other sites More sharing options...
TimW Posted October 16, 2022 Report Share Posted October 16, 2022 So you still have the old cant discs? Can't you just drill two holes in them and mount your bindings with longer bolts through them? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.