Corey Posted December 15, 2019 Report Share Posted December 15, 2019 48 minutes ago, Mr.E said: Curious how that works without the center hinges. I assume like a widely spaced UPM? Looks like the same pivot points with a different adapter to the board. 1 Quote Link to comment Share on other sites More sharing options...
skidad62 Posted December 15, 2019 Report Share Posted December 15, 2019 (edited) 17 hours ago, Corey said: Looks like the same pivot points with a different adapter to the board. Apex makes the All-Flex mounting hardware - it has the pivot points out at the ends with the mounting attachments and bumpers underneath where the bindings mount. It was suppose to come with center mounts that are optional to reduce the amount of board flex away from the plate it will allow (they suggest trying it without first) - my package arrived from Apex missing the optional center mounting hardware. Apex has not responded yet to send the other parts. Thinking I will prefer it without anyway. Edited December 15, 2019 by skidad62 Quote Link to comment Share on other sites More sharing options...
Jack M Posted December 20, 2019 Report Share Posted December 20, 2019 @skidad62 my Allflex mount kit also came without the center brackets. I’m totally fine with that, the plate works exactly the same as with UPM mounts. It’s the same plate after all. I don’t think it’s really supposed to be subjected to that kind of loading anyway. Oh by the way, the big big brother just arrived... (168 & 185) Thank you @i-carve.com! 4 Quote Link to comment Share on other sites More sharing options...
Shred Gruumer Posted December 21, 2019 Report Share Posted December 21, 2019 What's is that brand.. Relssek.. 1 Quote Link to comment Share on other sites More sharing options...
Habs2c Posted December 21, 2019 Report Share Posted December 21, 2019 14 hours ago, Shred Gruumer said: What's is that brand.. Relssek.. Probably some cheap stuff from China! 1 Quote Link to comment Share on other sites More sharing options...
Pokolikrat Posted December 21, 2019 Report Share Posted December 21, 2019 5 hours ago, Habs2c said: Probably some cheap stuff from China! Well consider quality of their products and customer service( non existing) you are probably closer to the target than you think.Their workmanship is big disappointment for me. I will post pictures later but I will never buy anything with that name for sure. Quote Link to comment Share on other sites More sharing options...
Jack M Posted December 24, 2019 Report Share Posted December 24, 2019 On 12/21/2019 at 5:04 PM, Ladia said: Well consider quality of their products and customer service( non existing) you are probably closer to the target than you think.Their workmanship is big disappointment for me. I will post pictures later but I will never buy anything with that name for sure. A big portion of the World Cup field seems to like Kessler. The custom 175 I bought last year is the finest snowboard of any kind that I have ever owned, and Kessler was very responsive. 3 stock 168s, stock 180 and 185 have been top quality. YMMV I guess. Quote Link to comment Share on other sites More sharing options...
Pokolikrat Posted December 24, 2019 Report Share Posted December 24, 2019 Well if this is a top quality we are probably living in different worlds. I tried to contact them twice. No I did not want new board just sent me missing letters and I will fix it somehow. Absolutely no answer. By the way world cap racers don’t pay for their boards. So for you guys think twice before you dump 15 hundreds maybe you should consider company which already know how to glue stuff together. 1 Quote Link to comment Share on other sites More sharing options...
Jack M Posted December 24, 2019 Report Share Posted December 24, 2019 That’s obviously a mishap. I’ve PM’d you the contact info I’ve used. Good luck! 1 Quote Link to comment Share on other sites More sharing options...
crote123 Posted January 1, 2020 Report Share Posted January 1, 2020 (edited) Nice way to start the new year. JJSB ClearZ 157. 9m single sidecut. 2x.4mm titanal + carbon. 19.2cm waist. JPM inserts. Using a JJSB center mounted plate. Floating @ both ends Edited January 2, 2020 by crote123 1 2 Quote Link to comment Share on other sites More sharing options...
yamifumi Posted January 1, 2020 Report Share Posted January 1, 2020 1 hour ago, crote123 said: Nice way to start the new year. JJSB ClearZ 157. 9m single sidecut. 2x.4mm titanal + carbon. 19.2cm waist. JPM inserts. Using a JJSB center mounted plate. Floating @ both ends Nice, looking good!! Mine is on the way and just waiting to be cleared at the boarder! Super excited to ride it! Quote Link to comment Share on other sites More sharing options...
Lurch Posted January 1, 2020 Report Share Posted January 1, 2020 1 hour ago, crote123 said: a JJSB center mounted plate. Floating @ both ends Nice! Could you post a close up of the center of the plate? Quote Link to comment Share on other sites More sharing options...
SunSurfer Posted January 1, 2020 Report Share Posted January 1, 2020 (edited) @crote123 some closeups, from various angles of the JJA plate mechanicals at each end, and the centre mechanisms please. This model has been seen in distance shots, but up close shots help us to understand the designers performance intentions. This is stuff that should then end up in the long thread on the different plate designs. Edit 5th Jan 2020: Thanks for the additional top photo of the central plate mechanism. Edited January 5, 2020 by SunSurfer Quote Link to comment Share on other sites More sharing options...
Neil Gendzwill Posted January 2, 2020 Report Share Posted January 2, 2020 Good lord but JJA’s website is a POS. There is almost no information there. 2 Quote Link to comment Share on other sites More sharing options...
Mr.E Posted January 2, 2020 Report Share Posted January 2, 2020 Pretty sure it's just a formality. If you want a board you pretty much ring him and ask for what you want. Quote Link to comment Share on other sites More sharing options...
SunSurfer Posted January 2, 2020 Report Share Posted January 2, 2020 42 minutes ago, Mr.E said: Pretty sure it's just a formality. If you want a board you pretty much ring him and ask for what you want. I'm with @Neil Gendzwill No way of knowing what you want if you don't know or understand what's on offer. Having read some of JJA's plate instructions and setup notes provided to buyers in the past I'm not sure he and I use some words and concepts in the same way. A picture is worth more than any number of words for me in that context. Quote Link to comment Share on other sites More sharing options...
Mellow Yellow Posted January 6, 2020 Report Share Posted January 6, 2020 I'm Thirsty this season! This beauty just came today.... pics do no justice! 5 Quote Link to comment Share on other sites More sharing options...
Rusty Edges Posted January 6, 2020 Report Share Posted January 6, 2020 That's Purty... (now I'll have that Rush song going through my head the rest of the day) Quote Link to comment Share on other sites More sharing options...
yamifumi Posted January 8, 2020 Report Share Posted January 8, 2020 (edited) Finally this beauty came into the mail from Canada. Custom JJA board. Super excited to ride and see what this board can do! I hope this is the first of many JJA boards to come..... Edited January 8, 2020 by yamifumi 5 Quote Link to comment Share on other sites More sharing options...
Mr.E Posted January 8, 2020 Report Share Posted January 8, 2020 I took my new-to-me older one out yesterday. Good stuff. I'm sure the new ones are lovely. Are you running one of his plates on that, or direct mounting? Quote Link to comment Share on other sites More sharing options...
yamifumi Posted January 8, 2020 Report Share Posted January 8, 2020 3 hours ago, Mr.E said: I took my new-to-me older one out yesterday. Good stuff. I'm sure the new ones are lovely. Are you running one of his plates on that, or direct mounting? For now, I am directly mounting SG binding. But I got the inserts for his plate just in case if I wanted to get it in the future. I am super excited and weekend doesn’t come fast enough. 2 Quote Link to comment Share on other sites More sharing options...
crote123 Posted January 8, 2020 Report Share Posted January 8, 2020 (edited) @yamifumi what's the width between the inserts? 13 or 15cm? Edited January 8, 2020 by crote123 Quote Link to comment Share on other sites More sharing options...
yamifumi Posted January 8, 2020 Report Share Posted January 8, 2020 27 minutes ago, crote123 said: @yamifumi what's the width between the inserts? 13 or 15cm? I have no idea but I can check tonight when I get home. are you talking about the width of inserts for binding? Quote Link to comment Share on other sites More sharing options...
crote123 Posted January 8, 2020 Report Share Posted January 8, 2020 11 minutes ago, yamifumi said: I have no idea but I can check tonight when I get home. are you talking about the width of inserts for binding? no, for the plate brackets (near the edges, leftmost to rightmost) Quote Link to comment Share on other sites More sharing options...
Shred Gruumer Posted January 8, 2020 Report Share Posted January 8, 2020 On 1/1/2020 at 11:34 AM, crote123 said: Using a JJSB center mounted plate Looks like something out of Mortal Engines... my god....Montreal Coming... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.