icebiker Posted February 1, 2013 Report Share Posted February 1, 2013 When I ride my Donek Axxess/Race Plates/Track 225's, I find myself struggling in the more mogul-ed up sections of trail that crop up late in the day. Despite the softer flex of these boots, the cuff is high enough that I don't get the flexibility to move the board around quickly in these sections (which I normally would enjoy on my free-ride/softies set up). However, I'm hooked on the easy in, easy out of plates...so tired of softies/straps! So, once I move to Sidewinders for the Axxess, I'm thinking of putting my Race Plates on my Ride Yukon twin-tip board (ditching my old Burton Torque 3-straps) and using that for late day bumpy stuff or powder days. I would not use this set up for true carving. To this end, I'd like to find a pair of low-cuff hardboots. Was thinking of something like what Damian Sanders used to ride back in the day (Koflach), or some MGX's, or similar. Any advice out there on what to look for? I've started to comb eBay but figured you guys could give me some other names/models/brands to include in my search strings. FWIW, I'm mondo 31. Thanks Quote Link to comment Share on other sites More sharing options...
pogokoenig Posted February 1, 2013 Report Share Posted February 1, 2013 Before changing the boots I would rather fully open the top buckle. Certainly I also recommend to ride in walk mode. A flexible binding can also be helpful. I love the CC Speed (former IBEX). In case you are really in the market for new boots: UPZ RC8 or UPZ ATB (All Terrain Boot) Quote Link to comment Share on other sites More sharing options...
wvrocks Posted February 1, 2013 Report Share Posted February 1, 2013 (edited) Do you ride with the forward lean adjusters locked? How about adding BTS with soft springs to allow for more cuff flex? fyi, there's a pair of Burton MGX in size 13 on ebay for $50 now. Edited February 1, 2013 by wvrocks Quote Link to comment Share on other sites More sharing options...
b0ardski Posted February 1, 2013 Report Share Posted February 1, 2013 When I ride my Donek Axxess/Race Plates/Track 225's, I find myself struggling in the more mogul-ed up sections of trail that crop up late in the day. Despite the softer flex of these boots, the cuff is high enough that I don't get the flexibility to move the board around quickly in these sections (which I normally would enjoy on my free-ride/softies set up). However, I'm hooked on the easy in, easy out of plates...so tired of softies/straps!So, once I move to Sidewinders for the Axxess, I'm thinking of putting my Race Plates on my Ride Yukon twin-tip board (ditching my old Burton Torque 3-straps) and using that for late day bumpy stuff or powder days. I would not use this set up for true carving. To this end, I'd like to find a pair of low-cuff hardboots. Was thinking of something like what Damian Sanders used to ride back in the day (Koflach), or some MGX's, or similar. Any advice out there on what to look for? I've started to comb eBay but figured you guys could give me some other names/models/brands to include in my search strings. FWIW, I'm mondo 31. Thanks However, I'm hooked on the easy in, easy out of plates...so tired of softies/straps! I've felt this way for 20+yrs.I use older Raichle 124 for all mt, ie powder/bumps/trees; same shells as 225 but 3buckle w/ a velcro strap in place of the top 4th buckle, far more support in rough terrain than laces/straps and as flexible as driver+flows if in walk mode. I've considered adding a the 4th buckle to improve carve performance but they are awsome in bumps and tight trees/powder and I don't want to give that up. I've ridden wide twins/all mt boards off piste with plates since 92 and I'm surprised more hardbooters won't. If you dont want to deal with a 2nd set of boots consider a soft strechy booster strap and leave the top buckle open and rear boot in walk mode. Quote Link to comment Share on other sites More sharing options...
Neil Gendzwill Posted February 1, 2013 Report Share Posted February 1, 2013 In case you are really in the market for new boots: UPZ RC8 or UPZ ATB (All Terrain Boot)The ATB is super-soft, the shell is more like gel. I love my 224s in the conditions you describe, but I think they are the same flex as your 225s. If you want softer you can always add a BTS and use soft springs. Quote Link to comment Share on other sites More sharing options...
Steve Prokopiw Posted February 1, 2013 Report Share Posted February 1, 2013 Tae,(mtnbumvbc) who has come to NICE the last couple of times, is one of the best carvers I know and uses this model. http://www.ebay.com/itm/DYNAFIT-ZZERO4-U-TF-AT-ALPINE-TOURING-SKI-BOOTS-TECH-BINDING-MENS-11-NEW-570-/130842398563?pt=LH_DefaultDomain_0&hash=item1e76d08f63 Quote Link to comment Share on other sites More sharing options...
tufty Posted February 1, 2013 Report Share Posted February 1, 2013 When I was a kid ski boots were leather and low cut, boy, if I had a dollar for every ankle that broke at the top of those low cut boots;) Not that I'd go back to low cut boots, but nowadays ski boots are plastic and high cut; boy, if I had a $CURRENCY_UNIT for every tib/fib break at the top of those high-cut boots... Quote Link to comment Share on other sites More sharing options...
Corey Posted February 1, 2013 Report Share Posted February 1, 2013 ATB info: http://www.bomberonline.com/VBulletin/showthread.php?34943-2011-2012-Upz-Atb http://www.bomberonline.com/VBulletin/showthread.php?34848-2011-2012-UPZ-Boots I recall Dave (Puddy Tat) mentioning that the ATB were almost as flexible as some soft boots. Maybe that was just in-person, can't recall... The red tongues are closer to a sheet of rubber than the tongues that come with the RC-10s. Quote Link to comment Share on other sites More sharing options...
icebiker Posted February 1, 2013 Author Report Share Posted February 1, 2013 Thanks guys. I have tried riding in Powder mode, but not Walk mode...Not sure if that would make a difference since its the forward lean I have the challenge with (e.g. when trying to move the board underneath me, the high cuff prevents me from getting further forward than I'd sometimes like). But could certainly try it. Typically ride with the upper clamp loose if conditions are soft/bumpy, but haven't tried riding with it completely unclipped..I suppose that could work at least for some trial and error. Those Dynafits look interesting...I was thinking of ski touring boots, but the ones I've seen in shops have a flexible toe-box (I assume for Tele) which wouldn't do well in a plate binding. I saw those 13 MGX's on eBay last night...but my experience with Burtons is they run tight and are not easy to get into if you have high arches...I'm a 14 with high arches. The 13's I tried about 10 years ago at Stratton were just too small. Mountaineering boots perhaps? Also not looking to spend a ton....not like we get a lot of powder on the ice-coast, eh?:( Quote Link to comment Share on other sites More sharing options...
michael.a Posted February 1, 2013 Report Share Posted February 1, 2013 You don't need new boots, bindings or boards, just modify your existing 225s to have more flex. I don't recommend low cuff boots and I don't recommend riding in walk mode (but it gives you a good idea of how a boot should flex). You can: find a softer tongue buy a spring system (I recommend the European one) then do the shell mod (PM me for more details) And if that's not enough, but should be for most riders, you can then: sand down the tongue by a mm or two cut the tongue lengthwise by a cm or two move the 3rd buckle up by 1cm Quote Link to comment Share on other sites More sharing options...
b0ardski Posted February 1, 2013 Report Share Posted February 1, 2013 (edited) I don't get the aversion some guy's have about riding raichle/deeluxe in walk mode? yes it means excessive heelside motion but that's the point, I only ride this way in powder and bumps where I want the quicker pivoting this allows(and full range of motion you can't get w/BTS), and only on the back foot unless its bottmles pow; I also ride with the cant adjusters open and this gives me a medial/lateral flex for all mt riding that equates to what I'd get from drivers/flows but with way better on piste perfornce. been riding this pair of shells (124s) for yrs/100s of days with no explosions, death or maiming even on double black bump runs, maybe I just don't ride aggressive enough. Edited February 1, 2013 by b0ardski Quote Link to comment Share on other sites More sharing options...
dingbat Posted February 1, 2013 Report Share Posted February 1, 2013 (edited) But seriously, I ride my rear RC-10 in walk mode for everything. Only issue was an ankle injury from stacking up hard last season, but I'm not so sure the boot being in walk mode was at fault. I also injured my knee and hip on the same side from the compression. The ankle was worst of all, but who knows, had it not been for that, the knee or hip may have been worse. Boot is just fine. I'd try the rear boot in walk mode first, then both. See how you like it. Edited February 1, 2013 by dingbat Quote Link to comment Share on other sites More sharing options...
DiveBomber Posted February 1, 2013 Report Share Posted February 1, 2013 Quote Link to comment Share on other sites More sharing options...
BlueB Posted February 1, 2013 Report Share Posted February 1, 2013 I think BTS should solve your problem... If you really must have lower cuff boots, Heads are lower then Raichle/Deeluxe. Old 121s and 123s are pretty low too. Nordicas too. Quote Link to comment Share on other sites More sharing options...
NSSage Posted February 1, 2013 Report Share Posted February 1, 2013 You should consider the BTS kit sold here: http://bomberonline.3dcartstores.com/BTS-kit_p_106.html and use it with the yellow springs I think that will help you out. You could also leave the top buckle undone and ride in walk mode that will give you a lot more flex up in your shins and you don't have to spend any money to try it out. UPZ ATB's may also be nice but not worth the money in my opinion and then you will only want to use them days you ride moguls or powder and stuff like that I doubt you would have any fun trying to carve in them. Quote Link to comment Share on other sites More sharing options...
nitro Posted February 1, 2013 Report Share Posted February 1, 2013 I rode low cuffs for 12years. burton "free carve" kinda like dive bombers,I had to put custom molded liners in them cause the original liners gave out after two seasons. I retired them a few years back& ride the track225's now. use your "walk"mode maybe some spray wax on the buckles& moving parts. I remember the calf bruises from those low cuffs from the first few rides,till the skin toughened. Quote Link to comment Share on other sites More sharing options...
michael.a Posted February 2, 2013 Report Share Posted February 2, 2013 I don't get the aversion some guy's have about riding raichle/deeluxe in walk mode? I used to ride in walk mode myself, and recommended it wholeheartedly to everyone I could. Then one day I tore all my the ligaments in my ankle. Riding in walk mode is dangerous, end of story. Except maybe for light and careful riding. Quote Link to comment Share on other sites More sharing options...
icebiker Posted February 10, 2013 Author Report Share Posted February 10, 2013 Once again, your collective advice helped a great deal. We got a little over a foot of powder last night at our local NJ hill (Mtn Creek). After some toying around, I found the following set up worked perfectly for the bumps: 1) both boots in powder mode (not walk) 2) front boot top buckle looser 3) rear boot top buckle completely unengaged, buckle below it barely tensioned. Thanks again. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.