Dr D Posted January 16, 2007 Author Report Share Posted January 16, 2007 one set of burton center discs with a 4 hole pattern 15$Would they fit Burton Womens bindings ? The stat 6 what type of board is it? Brian they are standard burton center plates with the exception of being four hole instead of three hole they should fit any burton binding. they are designed to use burton bindings on other boards that don't have the 3D insert pattern. the stat six is a burton alpine board there are pictures of it at the beginning of this post. It is a relatively rare board as the stat line was only made for one year. the specs are in one of the pictures it is a GS board and is quite fast. there was a stat 7 tested but not released to retail because burton felt it was to fast. the listed running length is 147 the overall length is 160 Quote Link to comment Share on other sites More sharing options...
Guest firechefs Posted January 16, 2007 Report Share Posted January 16, 2007 Need a pair of the base plates for my daughter. rngdoc@aol is email send me the cost and address if you still have any left. It looks like I need an all mountain board for me as apposed to a GS one. Im 225 and have size 12 boots . Keep me in mind if you find an all Mt board for big people. Brian Quote Link to comment Share on other sites More sharing options...
Neil Gendzwill Posted January 16, 2007 Report Share Posted January 16, 2007 they are standard burton center plates with the exception of being four hole instead of three hole they should fit any burton binding. What year are they from? Burton changed the tooth pattern around '94. Quote Link to comment Share on other sites More sharing options...
Dr D Posted January 16, 2007 Author Report Share Posted January 16, 2007 I rode it with size 12 feet and 270 pounds. I found it to be a little soft for me:eplus2: ITs a very stiff board though and was made for the heavier crowd. there was also a STAT 5 for the lighter weights. The angles weren't unmanagable but would be noticeable if you haven't ridden hard boots before. the waist is what 23.5. that's a good bit wider than my Donek. I am leaning toward wider myself for boards tho. the skwal is filling the skinny carver niche just fine so the boards are gettting wider. Quote Link to comment Share on other sites More sharing options...
Dr D Posted January 16, 2007 Author Report Share Posted January 16, 2007 What year are they from? Burton changed the tooth pattern around '94. good question I didn't know there was a difference. how do I tell? Quote Link to comment Share on other sites More sharing options...
Derf Posted January 17, 2007 Report Share Posted January 17, 2007 I'll see if I can post a picture or scan of both. Quote Link to comment Share on other sites More sharing options...
Dr D Posted February 1, 2007 Author Report Share Posted February 1, 2007 check the first post on this thread for updates and price markdowns. Quote Link to comment Share on other sites More sharing options...
Dr D Posted February 3, 2007 Author Report Share Posted February 3, 2007 somebody make me an offer on this stuff! build some benches or something:biggthump Quote Link to comment Share on other sites More sharing options...
Dr D Posted February 11, 2007 Author Report Share Posted February 11, 2007 some stuff sold check the first post for updates and price cuts:biggthump Quote Link to comment Share on other sites More sharing options...
Durango_Mark Posted February 12, 2007 Report Share Posted February 12, 2007 In Windows, find MS Photo Editor. Open your picture and resize it to somethong much smaller, maybe 640 x 480 or less. Do a 'Save As' with a new filename. That should do it. On some digital cameras, an e-mail thumbnail photo is provided along with the regular photo. The e-mail photo will be about 640 x 480. OK, I'm interested in the cant plate and the solo binding. Quote Link to comment Share on other sites More sharing options...
SnowSpeedster Posted February 12, 2007 Report Share Posted February 12, 2007 Did I see some Burton 4x4 discs for sale in here somewhere? -Charles Quote Link to comment Share on other sites More sharing options...
spinkyb30 Posted February 12, 2007 Report Share Posted February 12, 2007 Looking for Burton plates if they are still available. Quote Link to comment Share on other sites More sharing options...
Dr D Posted February 12, 2007 Author Report Share Posted February 12, 2007 Did I see some Burton 4x4 discs for sale in here somewhere?-Charles I do have a set of burton 4x4 discs available although I don't remember listing them. they are white and are standard not offset. I may have an offset individual one around to I will look. Quote Link to comment Share on other sites More sharing options...
Dr D Posted February 12, 2007 Author Report Share Posted February 12, 2007 Looking for Burton plates if they are still available. newer burtons are both sold sorry. I do have an older set of Burton variplates in like new condition and medium size. see the first post. Quote Link to comment Share on other sites More sharing options...
Dr D Posted February 12, 2007 Author Report Share Posted February 12, 2007 In Windows, find MS Photo Editor. Open your picture and resize it to somethong much smaller, maybe 640 x 480 or less. Do a 'Save As' with a new filename. That should do it. On some digital cameras, an e-mail thumbnail photo is provided along with the regular photo. The e-mail photo will be about 640 x 480. OK, I'm interested in the cant plate and the solo binding. the solo binding went with the pair for parts/spare sorry. I have several cant plates what are you looking for exactly? they are all three hole with the exception of the unicant. I have 2 6 or 7 degree round cants and a larger diameter 3 degree cant as well as the universal cant. Quote Link to comment Share on other sites More sharing options...
SnowSpeedster Posted February 12, 2007 Report Share Posted February 12, 2007 Check your email Quote Link to comment Share on other sites More sharing options...
west carven Posted February 12, 2007 Report Share Posted February 12, 2007 howdy doc, i would like the large 3 degree disk. im in whitefisn so maybe we can meet somewhere. west carven Quote Link to comment Share on other sites More sharing options...
Dr D Posted February 12, 2007 Author Report Share Posted February 12, 2007 howdy doc,i would like the large 3 degree disk. im in whitefisn so maybe we can meet somewhere. west carven I will be up there on tuesday morning and all day thursday and maybe saturday as well. you sure you don't need the stat six as well? Quote Link to comment Share on other sites More sharing options...
west carven Posted February 12, 2007 Report Share Posted February 12, 2007 howdy doc i would like to demo the stat6, i might be up there on thursday. dont have plans yet so who knows, might be on the ice, fishing that is. it is 13.5 side cut radius, yes? hows the board turns? Quote Link to comment Share on other sites More sharing options...
Dr D Posted February 12, 2007 Author Report Share Posted February 12, 2007 you'll be a better judge than me its made for a guy your size I overpower it and fold the nose. I rode it once long enough to realize it needed a lighter rider. you would be perfect size for it I believe. 253-5420 call my cell if you get up there. Quote Link to comment Share on other sites More sharing options...
Dr D Posted February 13, 2007 Author Report Share Posted February 13, 2007 A lot of the little stuff is spoken for but nobody has paid yet. If you want it lets get it done tomorrow if possible otherwise let me know so I can offer it to someone else. some of the items have at least three people waiting for them. Quote Link to comment Share on other sites More sharing options...
Dr D Posted February 15, 2007 Author Report Share Posted February 15, 2007 bump bump Quote Link to comment Share on other sites More sharing options...
Dr D Posted February 16, 2007 Author Report Share Posted February 16, 2007 howdy doci would like to demo the stat6, i might be up there on thursday. dont have plans yet so who knows, might be on the ice, fishing that is. it is 13.5 side cut radius, yes? hows the board turns? I will be up on saturday for kids wrestling match in the am and a half day on the hill drop me a line if you will be up there and I will bring the cant plate and the stat 6 for you to test drive. Quote Link to comment Share on other sites More sharing options...
west carven Posted February 17, 2007 Report Share Posted February 17, 2007 howdy doc how much do you want for the large 3 degree cant lift? saturday i can meet you some where in whitefish, in the a.m. ill be ice fishing after 130pm. west carven. Quote Link to comment Share on other sites More sharing options...
Dr D Posted February 17, 2007 Author Report Share Posted February 17, 2007 I will be at the high school for a little guy wrestling tournament at 10 I hope its done around noon but you can give me a call on my cell 253 5420 I will bring it along. I have it listed at $20 plus shipping so $20 it is. Its currently on the Stat 6 so I will have both along. give me a call in the AM and I will try to get with you before the the fish do:biggthump Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.