jhcolman

Sorry, its sold.

fyi Coiler advises that: "Sidecut should be 14/17m. Stiffness for approx 170 to 180 lbs.".

fyi Coiler advises that: "Sidecut should be 14/17m. Stiffness for approx 170 to 180 lbs.".

The boots are SOLD

My son was 19', weighed 155 lbs and was 5 feet 10 inches tall when it was made for him. He found the board to be slightly stiffer than average. I am looking for sidecut info, but am not sure if I will find that. It a GS raceboard.

DEELUXE TRACK 700 CARVING BOOTS TOP OF LINE DEELUXE BOOTS LIGHT USE (SOME SURFACE MARKS BUT OTHERWISE LIGHT USE) FULL MOLDABLE LINER (MOLDED ONLY ONCE) Mondo sizes Top shell size 25 - 27.5 Bottom shell size 27.5 - 32.5 Tounge 25 - 27.5 Liner 27 (US 9, EU 42, UK 8) The new model sells for $600. The identical model is still selling new for $400. You can have these boots for only $250 or best offer received from all. Email me at jhcolman at rogers dot com

THE BOARD IS SOLD. CUSTOM ALPINE RACING SNOWBOARD - BARELY USED TAKE YOUR RIDING TO THE NEXT LEVEL 182 cm long Top width 25 cm Waist 20 cm Bottom 23 cm Face and base in brand new condition The following lettering is on the side T 182 NSR 010AC1 6 . 9 . 1.6 or 6.9.16 Coiler advises that: "Sidecut should be 14/17m. Stiffness for approx 170 to 180 lbs." The Board was built in 2010 and was barely used. (Almost brand new, base freshly ground and waxed, edges sharpened). The Coiler offer to build this custom board was won at a racing event; the rider was already well equipped, so it was barely subsequently used. These Boards then sold for about $1,000, and this board is barely used. $550 or best offer received from all. The bindings shown on the board are NOT included. Please contact jhcolman at rogers dot com The board is white, with COILER lettering

Pics are on original post. Search for posts by jhcolman

Hi Folks Sorry I haven't been back to you. I had a backlog of work, following my return from holidays. The Boots are still for sale. $175 or best offer. The liner is mondo 26.0 to 26.5, so will fit 25.75 to 26.75. The liner is high quality and mouldable to fit. Fit my son for all of 2 seasons! He's now in a 27.0 to 27.5 . Cheers Julian

Hi Folks Sorry I haven't been back to you. I had a backlog of work, following my return from holidays. I've promised the Kessler and plates to oldsnowboards.com. I just need to confirm shipping details. If that does not work out, I'd be pleased to make the board available to the others that have expressed interest. Cheers Julian

Folks We have a pair of Deeluxe Suzuka's with the thermo moldable lining. Mondo 26.0 - 26.5. The also have the upgraded heels (purchased from Bomber in September 2009). So the heals have 1 season on them. THEY ARE IN DECENT CONDITION (NO BROKEN PARTS OR TEARS) AND THE PHOTOS MAKE THE BOOTS LOOK MORE SCUFFED THAN THEY REALLY ARE. PRICE REDUCED TO $175 US OR BEST OFFER.My son loved these boots, as they are as high quality as the Indy's, but not as stiff as the Indy's (now the AF700's). So while he was/is an aggressive rider, he weighed 135 lbs and finished at 165 lbs. They were perfect. So these boots are good for intermediate to expert (aggressive) riders. We purchased the boots new either 2 or 3 seasons ago. They have been heat fit 2 or 3x, so can still be heat fit 3 or 4 more X atleast. The boots are in good condition. There are surface scuffs and scratches, but no broken components. (one of the side cuff mounting bolts broke, but I have the repair part and I will replace that). I will include some spare parts (my son is a racer, so we always kept/keep spare parts on hand). See the Bomber site for foot measurement instructions. PRICE REDUCED TO $175 US OR BEST REASONABLE OFFER plus shipping, including some spare parts. Cheers Julian Attached Images -------------------------------------------------------------------------------- Last edited by jhcolman : 7 Hours Ago at 08:53 AM. Reason: Price Reduction jhcolman View Public Profile Send email to jhcolman Find all posts by jhcolman Add jhcolman to Your Buddy List #2 7 Hours Ago jhcolman Groomer Grommet Join Date: Jan 2004 Location: Toronto, Ontario, Canada Posts: 96 Price Reduced To $175 Or Best Offer -------------------------------------------------------------------------------- THEY ARE IN DECENT CONDITION (NO BROKEN PARTS OR TEARS) AND THE PHOTOS MAKE THE BOOTS LOOK MORE SCUFFED THAN THEY REALLY ARE. PRICE REDUCED TO $175 OR BEST OFFER.

THEY ARE IN DECENT CONDITION (NO BROKEN PARTS OR TEARS) AND THE PHOTOS MAKE THE BOOTS LOOK MORE SCUFFED THAN THEY REALLY ARE. PRICE REDUCED TO $175 OR BEST OFFER.

Yes, available. I have one party who would buy the plates (only), but I would prefer to sell both board and plates, if possible.

Folks We have a pair of Deeluxe Suzuka's with the thermo moldable lining. Mondo 26.0 - 26.5. The also have the upgraded heels (purchased from Bomber in September 2009). So the heals have 1 season on them. THEY ARE IN DECENT CONDITION (NO BROKEN PARTS OR TEARS) AND THE PHOTOS MAKE THE BOOTS LOOK MORE SCUFFED THAN THEY REALLY ARE. PRICE REDUCED TO $175 OR BEST OFFER. My son loved these boots, as they are as high quality as the Indy's, but not as stiff as the Indy's (now the AF700's). So while he was/is an aggressive rider, he weighed 135 lbs and finished at 165 lbs. They were perfect. So these boots are good for intermediate to expert (aggressive) riders. We purchased the boots new either 2 or 3 seasons ago. They have been heat fit 2 or 3x, so can still be heat fit 3 or 4 more X atleast. The boots are in good condition. There are surface scuffs and scratches, but no broken components. (one of the side cuff mounting bolts broke, but I have the repair part and I will replace that). I will include some spare parts (my son is a racer, so we always kept/keep spare parts on hand). See the Bomber site for foot measurement instructions. PRICE REDUCED TO $175 OR BEST REASONABLE OFFER. $200 US plus shipping, including some spare parts. Cheers Julian

Folks We have a 2006 Kessler 185 with Hangle Plates mounted. We would prefer to sell the board and plates together, but would consider selling them seperately. FYI, the picture shows F2 bindings mounted on the plates; the F2 bindings are NOT for sale. We will remove them, when the board is sold. The Hangle Plates were purchased in September 2009 for $500 plus shipping and were raced for one season. They are in excellent condition. The 2006 Kessler was purchased used from a racer. It has the round nose. It is well used but quite ridable. The racer we purchased it from had drilled 2 extra holes (at each end) for F2 plates, which were mounted using helicoils. The helicoils pulled out, resulting in a very small metal tears at each hole. They filled the holes with epoxy and glued the metal down. We bought the board and brought it too a race serviceman, who checked the holes and metal and found the repair to be quite solid, with little likelyhood of further tearing. The base is in good condition, as we maintained it for Noramcup racing. However, the fellow that mounted the F2 plates used bolts that were millimeters too long, resulting in 4 boltsized extruded marks on the base. Our race serviceman repaired these. They now intrude very very slightly (you can hardly tell) and have not impact the boards riding in any way. Given the above, and the fact that the board has the Hangles screwed mounted, I would recommend riding the board with the Hangles on, as a training board. This was a relatively inexpensive way for my son to try the Hangles, which he very much liked. He felt he could power through anything, with the extra weight and stiffness offered by the plates. However, he is now focused on highschool graduation marks and university, and is therefore not racing Noram at this time. Alternatively, you can remove the screws and fill the screw holes. We have a Catek binding mounting plate (brand new) that we can sell you (for $50) that will ensure that the metal around the aforementioned repaired binding holes remains absolutely solid, and generally protect the board. BTW, for those that are concerned about riding a new looking board, we have reconditioned the surface of other Kesslers by removing the surface paint coat and reapplying a clear mat spray paint. The result is a grey mat finish that looks like it is straight out of the factory. Pricing is as follows, in $US: Kessler $250 Kessler w. new Catek Binding Mounting Plate $300 Hangle Plates $325 Kessler with Hangle Plates (no Catek Plate) $475 FYI, we have no further information on the Kessler. Cheers Julian The board and plates weight about 20 lbs. The board is 185 cm long and about 23 cm wide at the front. So the box size is likely to be say 200 cm x 28 cm x about 10 cm. Feel free to check shipping costs via UPS, Fedex or Canada Post or Bus Parcel Express (just go to their website). The board is located in Toronto, ON M2J 1C1. I require that the board be shipped with tracking and full insurance.