Jump to content

nekdut

Member
  • Posts

    1,958
  • Joined

  • Last visited

  • Days Won

    2

Everything posted by nekdut

  1. Search returns no results. How is it? Will it be even worth visiting first week in September, especially given how this season has been going?
  2. Oh! Okay, so to confirm, this is the new and updated correct part: https://www.bomberonline.com/TD3-Lug-Shaft_p_57.html I should replace all of my shafts with this as they're all exhibiting some level of wear (and the one that failed this week of course). Thank you all! I am glad there is a clear and easy resolution to this.
  3. So this stems from my issue in this thread: What appears to be happening, is the wear on shape of the end to hold it in place from spinning and loosening the nut on the other side: This appears to be happening on more than one set of my bindings. Are any of you seeing this? The material for the shaft itself appears to be soft. Just to confirm, the replacement part is this, correct? https://www.bomberonline.com/TD3-Lug-Shaft_p_57.html When zoomed out, the part looks correct, however when selecting the part, the photo seems off.
  4. It worked! I didn't die. Now to order proper replacements. Eldora was pretty fun for a quick hit by the way.
  5. I will call him first thing tomorrow! Thank you. I will definitely take it easy. Tomorrow's day at Eldora is really a nice-to-have, and I'll treat it as such!
  6. Last minute trip to Summit county. Hit A-Basin yesterday and Copper today. Holy crap COLD, but I had a great time. On the walk back to the car, I hear a metallic clink and see my TD3 toeclip on the ground. WTF! I was riding all day today just fine and didn't feel a thing. Big lesson learned to closely check key bolts every day out on the snow! I was able to find a replacement screw that seems to fit well and snug down, but the real issue is the other end of the toe clip bolt. It seems to be spinning freely and has worn down the overall bolt itself from holding position. I can see this starting to take place on the rear as well. Are any of you having a similar problem? Seems to be a materials or design issue to be honest. I'll be ordering new parts ASAP but not soon enough for a few hours at Eldora before heading to DEN. Is this a death trap or will this hold? I will check the tightness every single run!
  7. nekdut

    FS: TD3 SI

    Yes, sold. I'll update the post.
  8. nekdut

    FS: TD3 SI

    Up for a sale is a set of Bomber Trench Digger 3, step in model, red elastomers. Some scuffs and minor scratches but they are bomb proof and work great. SOLD
  9. Bringing my own boots and bindings but would like to rent out there if possible.
  10. I know this an old post that I'm replying to, but is this still true? I didn't see any alpine boards there a few years ago.
  11. Does anyone know where to find this part in the US, particularly in size large? https://www.yyzcanuck.com/shop/parts/boot-parts/deeluxe-instep-cable-band/ Mine snapped yesterday and riding today sucked with all of that heel lift.
  12. I had no idea mine were so busted until I did a side by side!
  13. Plate itself appears to weigh 773g. The mounts are about 400g each.
  14. Sorry, good question! 3 & 6.
  15. I have a set of BP lowers that work great with the plate that I'm selling, or likely with any other plate where you're looking to reduce stack height and simplify any possible complexity with full Bomber TD2 or TD3 uppers. $50 shipped to the lower 48
  16. As the title states, up for sale is a Bomber Boiler plate - 4MM light version (best feel/easiest to use) Includes mounts for both UPM and 4x4. Will work with most any board out there. This will also include a Wunderbar to make mounting a breeze. SOLD
  17. I haven't heard much about the segmented wogococo Contra versus a regular. Has anyone done a back-to-back with similarly sized/flexing boards between these two designs?
  18. Bumping this valuable classic back up!
  19. nekdut

    Copper and A-Basin

    I'll be at Copper tomorrow and Sunday. Sean was kind enough to loan me a Pulse. I'm traveling on business so I was not able to bring a board of my own. Hope to see you guys out there!
×
×
  • Create New...