Dr D

they did. I have one in a three degree that is round but very large diameter. they had to have the sides trimmed on narrower boards. All of mine are three hole with the exception of the unicant that is large enough for plates and infinitely adjustable works with 3d or 4x4 it works best with burton bindings. ITs a good way to put three hole bindings on a 4 hole board as well.

I have been fighting mine for a year now and this is what I found. The BTS is awesome. you have to mold the liners and tighten them way beyond what you think you should in the cuff. I actually put in a set of intuitions and love the change. The BTs is very adjsutable and works well once you get it dialed in. IT takes flex pattern and smooths it out so it happens in the spring instead of the plastic. I found the cuff problem goes away when you tighten them 5-6 clicks more than you are now. this will no doubt require a remold to accomplish but they are sloppy until you really tighten them down. I put on a thick sock and tightened them down significantly in the cuff while molding to pack the liner and now with the regular sock I can tighten them enough to bring the cuff reasonable close together in the front. It makes a world of difference in the cuff flex and feel. I put race tongues in before discovering this and now am considering going back to regular tongues. give it a try. Intuition liners and BTS made the difference for me. now I just have to get the shell ground a little for my fat dogs and I will have them nailed.

welcome to the board. First I have to say that you have more catching up to do on equipment than I did. there are lots of viable replacements available that will up your game tremendously although a doughboy is not one of them. read the gear review section to get a feel for some of the new stuff. You emailed me about the lacroix contest. ITs a skwal which is a whole other animal. check out skwalzone.org and watch the video clips. skwalmasutra features the contest several times. IT has a 12.5cm waist so its very much not a gnu:D lots of fun though if you are a screamer. As far as skwals go its a fast GS type ride. you ride 90/90 or 90/87ish so its a different feel. Good luck on your search its an eyeopening experience. Gear has made quantum jumps since you last purchased. Oh yeah be sure and get JACK's opinion on wether or not you should go ASYM:lol: Hang around you'll like it here

Anybody ridden both the 168 and 178? I am also interested in a review of the differences in ride between the OSIN version and the Dynastar version. I absolutely love my OSIN 168 but I wish it was longer so I am getting one of these. Do I need to hang on to the 168 or are the rides similiar enough that I won't miss it?

I have several what are you looking for?

thursday for sure and saturday most likely. I rode today with john Mcginnis at Blacktail. Total hero snow and and inch or so of fresh. great carving runs.

4x4 plates spoken for

great to hear it has a good home! I will be up thursday for sure call me if you can make it. I have an identity 168 that needs a workout. I will give you a run on the garage 195 I would like your feedback on it:)

I wear a helmet turtle. Its the fleece tube attched to a thin hood that goes under your helmet. For really cold days I have a little fleece thing that velcros to the foam on my goggles and hangs down about 3/4 of an inch just enough to cover exposed nose and cheek bones. works well to -30f windchill

I don't have a problem with california succeeding from the union:biggthump And hawaii is a foreign country practically anyway but listen her dammit Alaska stays :D

your email isn't enabled:ices_ange But here is your answer anyway. the board is still available the bindings have sold

I will be at the high school for a little guy wrestling tournament at 10 I hope its done around noon but you can give me a call on my cell 253 5420 I will bring it along. I have it listed at $20 plus shipping so $20 it is. Its currently on the Stat 6 so I will have both along. give me a call in the AM and I will try to get with you before the the fish do:biggthump

that trailer has the low rearender protection bar you can see it. If it really is a rear end collision this guy got decapitated at the kneecaps:barf: hopefully the semi backed over a parked car and not the other possibility:eek:

Hmmmm I sense the application of boutique chemistry in liberal doses:lol: :lol:

incredible driving :eek: :eek:

check it out

This is an unused Demo board in as new condition. 1994 board very fast. not sure on the specs exactly but its a longer radius board $100 shipped lower 48 states

one burton three hole cant 7 degree I think $20 One set of like new medium variflex burtons with the three hole pattern discs. 25$ one set of burton center discs with a 4 hole pattern 15$ one pair of wild duck bindings old but serviceable. good for a kid starting out or rock board duty etc. $15 Two pairs of older UPZ boots in a lovely purple and pink both size 7 one new never used and one with minimal wear on the pads. store wear. they both have some scuffs due to shelf wear. these are older boots but in fantastic shape. god awful ugly though:eplus2: make an offer I also have one boot yes that's one boot in a burton shadow size 23.0 this boot is brand new they just couldn't find the mate to it. its gray on gray and in mint condition ideal for parts or the one that wears out the rear boot. its a right foot. brand new best offer

I will be up on saturday for kids wrestling match in the am and a half day on the hill drop me a line if you will be up there and I will bring the cant plate and the stat 6 for you to test drive.

yesterday I am standing at the summit literally seconds from stepping down into my step in and going when 15 of the little monkeys scoot up and sit down 5 abreast all the way across the run in front of me. Guess who was leading the pack? that's right the snowboard instructor:smashfrea :smashfrea I had to plow through and around and over them on semi flat ground to escape. I said guys its really rude to block someones line and you should think about using the side of the run. they gave me semi intelligent confused looks and continued the 10 minute process of buckling in.

check the big mtn daily rub in link on the main page. lots of pics there.

I am really getting lowballed here so lets try this. My bottom line is $180 shipped. I have a good deal of money in the inserts and the basegrind and tune not to mention that I paid almost that for it new. this is a new board I bought it at the end of last season new in the plastic never drilled and had inserts mounted in it etc. I rode it 2 times at the end of the season and 2 times this year. I had a base grind and tune done on it and it is as NEW.

nasty winter storm in the last 24 hrs. It was warm in the lower elevations I don't know what it did at silver but it could have been white out or even rain I'd check again today as the storm is gone on through.

here here and a hearty AYE:biggthump

according to donek she's had at least 8 boards made or 8 different specs anyway. COOL that's a whole lot better than someone filching boards and selling them online. someone stole 18 boards a couple weeks back off of BIG MTN so in light of that I jumped to conclusions.